Menu Settings - Canon imagePROGRAF iPF765 User Manual

Menu Settings

Menu Settings
Menu Settings
Menu items are as follows.
The printer menu is classified into regular menu items available when no print job is in progress and menu during
printing items only available while printing is in progress. see "Printer Menu Operations."
Regular menu
Paper Menu
Ink Menu
Job Menu
Set./Adj. Menu
*1: Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on selecting menu items, see "Menu Operations."
For details on menu levels and values, see "Menu Structure."
Paper Menu
The Paper Menu is not displayed during printing.
Load Paper
Eject Paper
Chg. Paper Type ( *1 )
Chg. Paper Size
ManageRemainRoll
Paper Details
450
Not displayed
The same Ink Menu as normal is displayed.
The same Job Menu as normal is displayed.
A limited Set./Adj. Menu containing the following items is displayed.
•
Adj. Fine Feed ( *1 )
•
Printer Info
Setting Item
(The type of paper Head Height
is displayed here.)
( *1 )
Skew Check Lv.
Cutting Mode
Cut Speed
Trim Edge First
CutDustReduct.
VacuumStrngth
Menu during printing
→P.441
→P.444
Description, Instructions
Select sheets or rolls and load the paper.
Choose this item before removing loaded paper.
Change the type of paper loaded. (See "Changing the Type of Pa-
per.")
→P.404
Change the size of paper loaded. (See "Specifying the Paper
Length.") (See "Paper Sizes.")
→P.405
Choose On to print a barcode at the end of a roll before you remove
it. The printed barcode can be used in managing the amount of roll
paper left. Choose Off if you prefer not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper Left.")
Adjust the Printhead height. (See "Troubleshooting Paper Abrasion
and Blurry Images (Head Height).")
If you print on Japanese paper (washi) or other handmade paper that
has an irregular width, choose Loose for a higher skew detection
threshold, or choose Off to disable skew detection. However, if paper
is loaded askew when detection is Off, note that paper jams or Platen
soiling may occur.
Specify whether or not to cut with the standard round-bladed cutter.
Choose Automatic to have the roll cut automatically after printing. If
you choose Manual, the paper will not be cut after printing. Instead, a
line will be printed at the cut position.
Choose Eject if you prefer not to have documents dropped immedi-
ately after printing, as when waiting for ink to dry.
Choose the cutting speed. If you use adhesive paper, choosing Slow
helps prevent adhesive from sticking to the cutter and keeps the cut-
ter sharp.
If a roll is loaded, the end of the paper will be cut.
If you choose On, a line will be printed at the cut position when paper
cutting is selected. This option reduces the amount of debris given off
after cutting. It also helps prevent adhesive from sticking to the cutter
and keeps the cutter sharp if you use adhesive paper. (See "Reduc-
ing Dust from Cutting Rolls.")
→P.417
Specify the level of suction that holds paper against the Platen. (See
"Adjusting the Vacuum Strength (VacuumStrngth).")
iPF765
→P.440
→P.394
→P.410
→P.553
→P.561
User's Guide