Other Maintenance; Preparing To Transfer The Printer - Canon imagePROGRAF iPF765 User Manual

Preparing to Transfer the Printer

Other Maintenance

Other Maintenance
Preparing to Transfer the Printer .................................................................................................................. 588
Updating the Firmware ................................................................................................................................. 591
Preparing to Transfer the Printer Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
•
Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains. If it is necessary
to tilt the printer in transit, contact your Canon dealer.
Important
•
When you execute prepare to transfer, ink is drawn into the Maintenance Cartridge. Depending on the amount of free
space in the mounted Maintenance Cartridge, you may need to replace it with a new one at this time.
Note
Note that replacement is not required if there is 60% or more free space. (See "Checking the Remaining Maintenance
Cartridge Capacity.")
•
Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is,
when you execute the printer menu item to prepare for transfer).
Remove paper
1
Remove the paper.
Rolls (See "Removing the Roll from the Printer.")
•
• Sheets (See "Removing Sheets.")
Access the Move Printer menu
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
Once preparations are finished, a message on the Display Screen requests you to open the Ink Tank Cov-
er.
Important
588
→P.582
).
•
If the Tab Selection screen is not displayed, press the Menu button.
•
If consumables must be replaced, the message "Consumables must be replaced. Call for service." is shown
on the Display Screen and preparation is not possible. If this message is displayed, press the OK button and
contact your Canon dealer for assistance.
→P.406
→P.424
iPF765
User's Guide