Netware Settings; Configuring Netware Network Settings; Specifying The Printer's Frame Type - Canon imagePROGRAF iPF765 User Manual

Configuring NetWare Network Settings

NetWare Settings

NetWare Settings
Configuring NetWare Network Settings ....................................................................................................... 492

Specifying the Printer's Frame Type ............................................................................................................ 492

Specifying NetWare Print Services .............................................................................................................. 495
Configuring the Printer's NetWare Network Settings With RemoteUI .......................................................... 497
Configuring NetWare Network Settings
Configuring NetWare Network Settings
Follow these steps to configure the network environment when using the printer in a NetWare network.
•
To configure network settings, you must be logged in with administrative rights such as Administrator. We recommend
that your network administrator configure the network settings.
Important
1
Configure the Ethernet frame type to be used in communication by the printer with the computer.
For details on configuring settings, see "Specifying the Printer's Frame Type."
2
Configure the NetWare print service such as the print server and queue.
For details on configuring settings, see "Specifying NetWare Print Services."
3
Configure the NetWare protocol details other than the frame type.
For details on configuring settings, see "Configuring the Printer's NetWare Network Settings With RemoteUI."
→P.497
After completing the settings of this procedure, configure the settings on each computer for printing in a
NetWare network.
4
Connect to the NetWare network.
Install the NetWare client software on all computers that are to perform printing, and log in to the NetWare
server or tree. For details on connecting, refer to the documentation for NetWare or your operating system.
5
Install the printer driver.
According to the instructions of your network administrator, install the printer driver on all computers that
are to perform printing. When installing, select Network Printer as the printer connection destination, and
select the queue created when configuring the NetWare print service.
6
Configure the printer port by the following procedure. If you configured the printer connection destination
while installing the printer driver, this procedure is unnecessary.
1.
Open the Printers and Faxes (or Printers, Devices and Printers) window.
2.
Right-click the icon of this printer and choose Properties (For Windows 7 and Windows Vista, Printer
Properties) to open the printer properties window.
3.
Click the Port (or Advanced) tab to display the Port (or Advanced) sheet.
4.
Configure the print destination port to the print queue created when configuring the NetWare print serv-
ice.
Specifying the Printer's Frame Type
Specifying the Printer's Frame Type
To enable communication between the printer and computers on your network, specify the Ethernet frame type in
your NetWare environment.
Follow the steps below to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Con-
492
trol Panel.
•
Before specifying the frame type, make sure the printer is on and connected to the network.
Important
iPF765
→P.492
→P.495
User's Guide