Resizing Originals To Match The Paper Size (Mac Os X) - Canon imagePROGRAF iPF765 User Manual

Resizing Originals to Match the Paper Size (Mac OS X)

Resizing Originals to Match the Paper Size (Mac OS X)

Resizing Originals to Match the Paper Size (Mac OS X)
This topic describes how to enlarge originals before printing to match the paper size, based on the following exam-
ple.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
Paper type: Plain Paper
•
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1
This sets the
•
Note
2
Select the printer in the
3
F
In the Paper Size list, click the size of the original. In this case, click ISO A4.
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
5
Access the Main pane.
66
6
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
7
Make your selection in the
B C
Format for and Paper Size.
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
A
Printer list.
E
Print Target list.
F
OK to close the dialog box, and
User's Guide
iPF765