Canon imagePROGRAF iPF765 User Manual page 324

Large format printer

Hide thumbs Also See for imagePROGRAF iPF765:

Table of Contents

Color Adjustment

Adjusting Monochrome

Use the monochrome setting to print monochrome images of color photographs captured with a scanner or digital

camera or other color images.

Select Monochrome on Color Mode in the Color Settings panel.

Select Color Adjustment.

Drag each slider to the left or right to adjust.

Adjusts gray from cool black (bluish tones) to warm black (reddish tones).

You can also click the up or down arrow, or enter the number directly to increase or decrease the value.

Adjusts the brightness of the entire image. When the results of the printout are brighter than

the original images such as the original photo before scanning and graphics created on the

display, or when you want to print in different degrees of brightness, use this feature.

Adjusts the relative brightness between the brightest and darkest portions of the image.

*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.

You can also click the up or down arrow, or enter the number directly to increase or decrease the value.

User's Guide

Troubleshooting