Printing Vertical Or Horizontal Banners (Large-Format Printing; Mac Os X) - Canon imagePROGRAF iPF765 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF765:
Table of Contents

Advertisement

Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)

If printing is unsuccessful, you may be able to print after completing the following setting.
1
On the Layout sheet, click
play the Special Settings dialog box.
2
In the FineZoom Settings list, click Yes.

Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)

Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
By automatic enlargement of a document created with an application software by the printer driver, you can print
maximum 18.0 m vertical or horizontal banners.
This topic describes how to print a banner about five times as long as the roll width based on the following exam-
ple.
Document: An original designed for a horizontal banner
Page Size: Non-standard (100×500 mm [3.9×19.7 in])
Paper: Roll
Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
The print procedure is as follows.
1.
In the application, create an original in the format of a horizontal or vertical banner.
2.
In Page Setup, register Custom Page Sizes (Mac OS X 10.4.11–10.5) / Custom Paper Sizes (Mac OS X
10.6-10.7).
Once you register Custom Page Sizes / Custom Paper Sizes, you then can select it repeatedly from the pa-
104
per size list.
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
3.
Print the banner, using the settings that correspond to banners.
The following procedures are based on Mac OS X 10.5. The method of setting up non-standard paper sizes varies de-
pending on the version of Mac OS X.
Note
J
Special Settings to dis-
iPF765
User's Guide

Advertisement

Table of Contents
loading

Table of Contents