To Start From Microsoft Excel - Canon imagePROGRAF iPF765 User Manual

To start from Microsoft Excel

6
Click the Create Page button.
7
Click OK if the message is displayed.
8
Edit and create the document.
Important
Note

To start from Microsoft Excel

To start from Microsoft Excel
Below are the steps to start Print Plug-In for Office from Microsoft Excel.
1
Start Microsoft Excel.
2
If Start imagePROGRAF Print Plug-In is displayed on the toolbar/
ribbon, click it.
Important
3
Check that the imagePROGRAF Print Plug-In toolbar/ribbon
is displayed.
4
Click the buttons on the toolbar/ribbon according to the items you want to set.
Menu
258
Printer list
Print Button
•
The layout may collapse if you create a form using existing data. If that is the case, modify the data again.
•
Printing is done in Print Matching Roll Width of the Printing Wizard. For details on Print Matching Roll
Width, refer to see "Print Matching Roll Width (PowerPoint)."
•
If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
•
When Print Plug-In for Office is not displayed
Icon
Displays the About, Help, and Special Settings dialog boxes. (See "Configuring Special
Settings.")
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed again. Se-
lect this when you want to display all printer drivers or update the display.
The print Wizard is displayed.
The settings Print Entire Sheet and Print Selected Area can be set.
→P.249
→P.233
Contents
→P.265
.
iPF765
User's Guide