Resizing Originals To Fit The Roll Width (Mac Os X) - Canon imagePROGRAF iPF765 User Manual

Resizing Originals to Fit the Roll Width (Mac OS X)

9
Select the
•
Note
10
E
Click Fit Roll Paper Width.
•
Note
•
11
Confirm the print settings and print as desired.
•
Note

Resizing Originals to Fit the Roll Width (Mac OS X)

Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-
ple.
Document: Any Type
•
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
Roll paper width: 16 inches (406.4 mm)
•
70
C
Enlarged/Reduced Printing check box.
C
If the Enlarged/Reduced Printing check box is not
displayed on the Page Setup sheet, clear the
derless Printing check box.
E
After you click Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded
roll in the Roll Paper Width list and click OK.
Make sure the roll paper width you specify matches the width of the loaded roll.
For tips on confirming print settings, see " Confirming Print Settings(Windows)
B
Bor-
iPF765
"
→P.163
User's Guide