Colors In Printed Images Are Uneven - Canon imagePROGRAF iPF765 User Manual

iPF765
Cause
Printing does not proceed smoothly be-
cause print jobs are interrupted during
transmission.
In the Control Panel menu, Adj. Priority is
set to Print Length.
The Printhead is out of alignment.
The Printhead nozzles are clogged.
Streaks may occur if you set the Print
Quality too low.
The type of paper specified in the printer
driver does not match the type loaded in the
printer.

Colors in printed images are uneven

Colors in printed images are uneven
Cause
Line Drawing/Text is selected when print-
ing images in many solid colors.
You are printing on paper that curls easily.
Printed colors may be uneven if you set
the Print Quality too low.
Color may be uneven between dark and
light image areas.
When borderless printing is used, the edge
of the paper is cut during printing. Thus,
ink density may be slightly uneven at the
leading edges.
The Printhead is out of alignment.
Allowing printed documents to dry on top
of each other may cause uneven colors.
Density may be uneven if you use Glossy
Paper or Coated Paper.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.
User's Guide
Exit other applications and cancel other print jobs.
Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed
amount may improve results.
(See "Adjusting the Feed Amount.")
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
Print a test pattern to check the nozzles and see if they are clogged.
(See "Checking for Nozzle Clogging.")
Choose a higher level of Print Quality in the Advanced Settings of the printer driver and
try printing again.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest or High
modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
In Print Priority in the Advanced Settings of the printer driver, choose Image.
Printed colors may appear uneven on the leading edge of paper that is susceptible to curling.
Select a stronger level in VacuumStrngth in the Control Panel menu to increase suction
against the paper, or specify a leading margin of 20 mm (0.79 in) or more.
(See "Adjusting the Vacuum Strength (VacuumStrngth).")
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
Printing in Fast or Standard mode is faster and consumes less ink than in Highest or High
modes, but the printing quality is lower.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Select Unidirectional Printing in the Advanced Settings of the printer driver.
Specify No in Auto Cut in the printer driver before printing. In this case, the paper can be
printed without borders on the left and right sides only. Cut the printed document ejected
from the printer, and then use scissors or a cutting tool to cut away the edges on the top and
bottom.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")
To avoid uneven colors, we recommend drying each sheet separately.
In Advanced Settings of the printer driver, choose Highest or High in Print Quality.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loaded in the
printer.
Colors in printed images are uneven
Corrective Action
→P.555
→P.570
→P.401
→P.419
Corrective Action
→P.561
→P.401
→P.419
→P.548
→P.58
→P.58
→P.58
→P.548
609