Removing The Roll From The Printer - Canon imagePROGRAF iPF765 User Manual

Removing the Roll from the Printer

Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Size, and then press the OK button.
4
Press ▲ or ▼ to select Roll Length, and then press the OK button.
5
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press the ◀ or ▶ button to move to the next field for input.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.

Removing the Roll from the Printer

Removing the Roll from the Printer
Remove rolls from the printer as follows.
•
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is now rewound and ejected.
Caution
406
•
If the Tab Selection screen is not displayed, press the Menu button.
).
•
If the Tab Selection screen is not displayed, press the Menu button.
If you have selected ManageRemainRoll > On in the Con-
•
trol Panel menu, a barcode is printed on the leading edge
of the roll.
Do not remove the roll before the barcode is printed. You
will be unable to keep track of the amount of roll paper left.
(See "Keeping Track of the Amount of Roll Paper Left.")
→P.410
→P.412
iPF765
User's Guide