Canon imagePROGRAF iPF765 User Manual page 458

Menu Settings
System Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use USB
Use Ethernet
Use RemoteUI
Reset PaprSetngs
Erase
HDD Da-
ta
458
Output
Method
Setting Item
High Speed
Secure High Spd.
Secure
Print
Print (Auto Del)
Description, Instructions
Choose Off to give priority to margin settings. The larger val-
ue is used if the margin specified in the printer driver does
not match the margin in the printer menu
Specify whether to trim the leading edge of the currently re-
tracted roll when the roll is advanced. Cut the edge if you are
concerned about any marks left on the roll when the roll is
left in the retracted position.
Specify On to have rolls cut when printing begins after Sleep
mode or when the power is restored. Selecting Automatic
will trim the edge when the roll has been in the retracted po-
sition for two days or more.
Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Colors
(Head Posi. Adj.).")
→P.548
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer adjust
the timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page.
Select Warning > On to display warnings if the nozzles clog
during printing.
When Off is selected, the device can no longer be accessed
via USB.
When Off is selected, the device can no longer be accessed
via Ethernet.
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Config-
uration Tool to the default values.
Erases file management data for print job data stored on the
printer's hard disk. (See "Erasing Data on the Printer's Hard
Disk.")
→P.476
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random data
(one time each). Verification is performed to check if the data
was correctly written. (See "Erasing Data on the Printer's
Hard Disk.")
→P.476
Select the printing method for jobs received from software
other than the printer driver. When using the printer driver,
configure settings on the printer.
iPF765
→P.476
User's Guide