Lancia Lybra Owner's Handbook Manual page 91

Each pre-set station button can be
set to a programme type as required:
1) Switch the PTY function on.
Press the TP/AF 11 button for ap-
proximately six seconds until the mes-
sage "PTY ON" appears on the dis-
play. Select the required programme
type (e.g. "NEWS").
2) Repeatedly press either button 17
or 18 until the required programme
type appears on the display.
3) Press one of the pre-set station
buttons for longer than two seconds.
RDS station frequency
The frequency of the RDS station
currently tuned to can be displayed.
Press the EXP 14 button briefly.
The transmission frequency will be
displayed for approximately ten sec-
onds in the place of the station name.
90
Scanning pre- set stations (SCAN
function) (12)
The scan function automatically
scans the stations stored with the IS
function. Each station will be played
for ten seconds.
Press the SCAN 12 button to switch
the function on.
Maximum reception sensitivity
(DX function) (20)
The DX function is used to obtain
the maximum radio station sensitiv-
ity allowing to automatically tune to
local stations regardless of the other
radio functions.
Press DX 20 to switch the function
on and off.
The message "DX" will appear on
the display when the function in on.
EXPERT FUNCTION
(CUSTOMISING THE
OPERATING PARAMETERS) -
EXP (14)
To make the everyday use of the
sound system as easy as possible, the
EXPERT function can be used to cus-
tomise certain settings which need to
be used only once or very occasion-
ally.
Press the EXP 14 button (fig. 76)
with the key at MAR to access the
EXPERT functions. The EXPERT
function screen with appear after the
LANCIA trademark screen.
Press the EXP 14 button again to
quit the EXPERT function.
fig. 79