Lancia Lybra Owner's Handbook Manual page 31

HEAD RESTRAINTS (fig. 19)
To improve passenger safety, the
height of the front and rear side head
restraints can be adjusted so that the
head rests on them properly.
Remember that the head
restraints should be ad-
justed to support the back
of your head and not your neck.
Only if they are in this position will
they be able to provide effective
protection in the event of a rear-
end shunt.
fig. 19
30
Front seats (fig. 20)
To adjust the front head restraint
height, move it upwards to the re-
quired position. To lower the front
head restraint, keep button A de-
pressed and return it to the required
position. The front head restraints can
be adjusted for tilt by moving them in
the direction of the arrows as shown
in the figure below. Front head re-
straints are not removable.
Rear side seats (fig. 21)
To adjust the rear side head restraint
height, lift it from its housing until
hearing a click.
To bring it back to the original po-
sition: press buttons A and lower the
head restraint until it fits into the seat
back.
fig. 20
Rear central seat
Versions with single seat (fig. 22):
To improve passenger safety the
height of the head restraint can be ad-
justed.
To raise it, grip the head restraint at
the base and pull it upwards com-
pletely until hearing a click.
To lower it, press it downwards
keeping button A pressed until hear-
ing a click.
Versions with twin seat (fig. 23):
To adjust the rear central head re-
straint height, lift it from its housing
until hearing a click.
fig. 21