Towing The Car - Lancia Lybra Owner's Handbook Manual

– No other tool, part from the han-
dle shown in this chapter, can be fit-
ted to the jack.
WITH A SHOP JACK OR AN
ARM HOIST
The car can only be jacked up by
positioning the jack arm under the
front A riser (fig. 60) or the rear riser
B (fig. 61) and placing a suitably
sized piece of wood in between.
Be very careful not to
squeeze the brake pipes,
the fuel pipes or the side-
member ribbing.
fig. 60
206

TOWING THE CAR

IMPORTANT Respect the local
rules for towing the car.
The car is provided with a front (fig. 62)
and rear (fig. 63) attachments for fas-
tening the tow ring.
To fit the tow ring, remove the
bumper cover by using a screwdriver
as a lever in point A.
fig. 61
Carefully clean
threading before fastening
the tow ring B. Make sure
that the tow hitch is fully fastened
(by at least eleven thread turns).
fig. 62
fig. 63
the