Lancia Lybra Owner's Handbook Manual page 70

– the message SPEED LIMIT EX-
CEEDED will appear on the display;
– the sound system (if on) will be
muted (MUTE function).
The message SPEED LIMIT EX-
CEEDED will remain on the display
until the speed drops to at least 5
km/h under the speed limit or until
the SPEED LIMIT function is
switched off.
Select RETURN D after adjusting
the settings by turning knob 3 and
pressing to confirm. This will take you
back to the SETUP menu (fig. 64).
Tyre inflation pressure
Select the TYRE function by turn-
ing knob 3 (fig. 61) and press the
knob to confirm. The prescribed tyre
inflation pressure according to the
load will be displayed.
IMPORTANT This function pro-
vides the prescribed value and not the
actual tyre inflation pressure. Check
the tyre inflation pressure on a regu-
lar basis.
TRIP COMPUTER (fig. 69)
Press the TRIP button 6 (fig. 61)
with the key at MAR. A screen with
the following functions will appear af-
ter the LANCIA trademark screen:
– RANGE
– AVG CONSUMPTION (TRIP
MODE)
– FLASH CONSUMPTION (KEY
MODE)
– TRAV DISTANCE (kilometres
driven since last reset)
– AVERAGE SPEED
– TIME ELAPSED (since the last
start-up or reset)
– KEY/TRIP
– TRIP RESET.
If the TRIP function is on (manual
data resetting), you can reset data by
selecting and confirming the TRIP
RESET field in the function screens.
At the end of the settings, either
press TRIP 6 again (fig. 61) to go
back to the main menu, or HELP
RADIO 4 to go to the sound system
functions screen, or SETUP 5 to go to
the display setting screen.
fig. 69
69