Lancia Lybra Owner's Handbook Manual page 250

2) Remove the light cluster by loos-
ening the nuts C (fig. 48) with end A
(fig. 49) of the tool supplied with the
car and pull it outwards without dis-
connecting the connector. Use end B
(fig. 49) of the tool in versions with
HI-FI sound system to loosen the
right-hand light cluster fastening
nuts. Fit the adapter C (fig. 49) pro-
vided.
3) Loosen screw D (fig. 50) and re-
move the bulb holder E.
4) Remove the bulb by pressing it
slightly and turning it anticlockwise.
Replace it (fig. 51).
fig. 48
F - Reversing light bulb (right-hand
cluster only): B, 12V-P21W.
Rear fog light bulb (left-hand clus-
ter only): B, 21V-P21W.
G - Upper taillight bulb: B, 12V-
R10W.
H - Direction indicator bulb (or-
ange): B, 12V-PY21W.
L - Brake light bulb: B, 12V-P21W.
5) Refit the bulb holder E (fig. 50)
and fasten it with screw D (fig. 50).
fig. 49
6) Refit the light cluster and fasten
the nuts C (fig. 48).
7) Refit the utility compartment flap
by inserting the lower part first and
then clipping it back.
fig. 50
fig. 51
249