Lancia Lybra Owner's Handbook Manual page 88

Automatic search in the FM wave-
bands works according to two levels
of sensitivity. During the first scan in
the reception band, the system seeks
only the stations presenting high in-
tensity fields (local stations). During
the second scan, the system seeks sta-
tions with low intensity fields (distant
reception). The message "DX" will
appear on the display during the
search.
2) Press either button 17 or 18 brie-
fly to start automatic search in the re-
quired direction. The respective fre-
quency will appear on the display
(e.g. "99.40").
When a station with identification
code is found, the code is shown on
the display. If not, the frequency is
shown.
If the RDS station/programme tuned
to in the selected waveband (e.g.
"FM1") is stored at one of the pre-set
station buttons numbered from 1 to 6,
the respective digit will appear on the
display, e.g. "3" for pre-set station 3.
3) To store the tuned station under
a pre-set station button, follow the
procedure described in the previous
paragraph "Pre-set station buttons".
Manual frequency tuning
1) Select the waveband (FM1, FM2,
FM3, MW or LW) by means of the
BAND 16 button.
2) Press either button 17 or 18 for
approximately six seconds until the
message "MAN" appears on the dis-
play with the frequency (e.g. "MAN
100.60").
Hold either button 17 or 18 pressed
to fast forward.
3) Tune in the required direction by
pressing either button 17 or 18. Press
button 17 to increase the frequency
by 50 kHz units in FM and 1 kHz
units in AM. Press button 18 to re-
duce frequency in the same fashion.
If the RDS station/programme tuned
to in the selected waveband (e.g.
"FM") is stored at one of the pre-set
station buttons numbered from 1 to 6,
the respective digit will appear on the
display, e.g. "3" for stored station 3.
4) To store the tuned station at a
pre-set station button, follow the pro-
cedure described in the previous
paragraph "Pre-set station buttons".
5) Ending manual frequency tuning:
press a pre-set station button num-
bered from 1 to 6 briefly.
IMPORTANT If no button is pres-
sed for more than 60 seconds, the
manual frequency tuning function is
switched off automatically.
87