Lancia Lybra Owner's Handbook Manual page 183

IMPORTANT Use the hexagonal re-
cess on the upper part of the screw-
driver grip (provided) to facilitate this
operation. Insert the screwdriver bla-
de in the hole in the grip to handle
(fig. 11).
15) Make sure the surfaces of the
spare wheel that come into contact
with the hub are clean and free from
any impurities which could result in
the wheel bolts working loose.
fig. 11
182
16) Put the spare wheel on, making
sure that centring pins M (fig. 12) on
the hub coincide with the holes on the
wheel.
17) Tighten the four fastening bolts.
IMPORTANT Use the hexagonal re-
cess on the upper part of the screw-
driver grip (provided) to facilitate this
operation. Insert the screwdriver
blade in the hole in the grip to handle
(fig. 11).
fig. 12
18) Turn the handle to lower the car
and remove the jack (fig. 13).
19) Tighten up the wheel bolts in a
criss-cross fashion following the order
shown (fig. 14).
fig. 13
fig. 14