Lancia Voyager 2014 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. Lancia Manuals
  4. Automobile
  5. Voyager 2014
  6. Owner's handbook manual

Lancia Voyager 2014 Owner's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner Handbook

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Voyager 2014 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lancia Voyager 2014

Summary of Contents for Lancia Voyager 2014

  • Page 1 Owner Handbook...
  • Page 2 Lancia Service authorised workshops you can find technicians who are trained by us, offering quality and professionalism for all your service requirements. Lancia workshops are always close to you for your servicing operations, repairs and seasonal checks and our experts will offer practical recommendations for keeping your car in the best possible condition.
  • Page 4 All our Genuine Parts undergo rigorous testing, both in design and build stages, by specialists who check the use of cutting-edge materials and test their reliability. This guarantees performance and safety in the long term for both you and the passengers in your automobile. Always insist on a Genuine Part and check that it has been used.
  • Page 5 • the Warranty Certificate with terms and conditions for maintaining its validity • the range of additional services available to LANCIA customers. Enjoy the read. Happy motoring! This Owner Handbook describes all versions of the LANCIA Voyager; please consider only the information rel- evant to your version, engine and configuration.

  • Page 7: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..............3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .

  • Page 9: Introduction

    INTRODUCTION • INTRODUCTION ......4 • IMPORTANT NOTICE......4 •...

  • Page 10: Introduction

    Congratulations on selecting your ALL MATERIAL CONTAINED IN in loss of control, collision with other new LANCIA vehicle. Be assured that THIS PUBLICATION IS BASED ON vehicles or objects, going off the road, it represents precision workmanship,...
  • Page 11 The manufacturer reserves the right the driving safety of your vehicle will Nor do they cover the cost of any to make changes in design and speci- not be impaired by the attachment or repairs or adjustments that might be fications, and/or to make additions to installation of such parts.

  • Page 12: How To Use This Manual

    HOW TO USE THIS ordered, certain descriptions and il- Consult the following table for a de- lustrations may differ from your vehi- scription of the symbols that may be MANUAL cle's equipment. used on your vehicle or throughout Consult the Table of Contents to de- this Owner's Manual: The detailed index at the back of this termine which section contains the in-...

  • Page 13: Warnings And Cautions

    WARNINGS AND VEHICLE CAUTIONS MODIFICATIONS/ ALTERATIONS This Owners Manual contains WARNINGS against operating proce- dures that could result in a collision or WARNING! bodily injury. It also contains CAU- Any modifications or alterations to TIONS against procedures that could this vehicle could seriously affect its result in damage to your vehicle.

  • Page 15: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • A WORD ABOUT YOUR KEYS ....13 • IGNITION NODE MODULE (IGNM) — (for versions/markets where provided) ...13 •...
  • Page 16 • REMOTE KEYLESS ENTRY (RKE) (for versions/markets, where provided) ... .18 • REMOTE UNLOCK DOORS AND LIFTGATE . . .19 • REMOTE LOCK DOORS AND LIFTGATE ..19 •...
  • Page 17 • SLIDING SIDE DOOR ..... .29 • POWER SLIDING SIDE DOOR (for versions/ markets, where provided) ....29 •...
  • Page 18 • CHILD RESTRAINTS ....56 • ENGINE BREAK-IN RECOMMENDATIONS ..68 • ADDITIONAL REQUIREMENTS FOR DIESEL ENGINE .......68 •...
  • Page 19 A WORD ABOUT YOUR KEY FOB and ON/RUN. The START position is a spring-loaded momentary contact po- KEYS The Key Fob also contains the Remote sition. When released from the START Keyless Entry (RKE) transmitter and Your vehicle is equipped with a key- position, the switch automatically re- an emergency key, which stores in the less ignition system.
  • Page 20 REMOVING KEY FOB WARNING! CAUTION! (Continued) FROM IGNITION An unlocked car is an invitation to • Allowing children to be in a ve- Place the shift lever in PARK. Turn thieves. Always remove the Key hicle unattended is dangerous for the Key Fob to the OFF position and Fob from the ignition and lock all a number of reasons.
  • Page 21 STEERING WHEEL must turn the wheel slightly to the that there is a problem with the elec- right to disengage it. If you turned tronics. In addition, if the light begins LOCK — (for the wheel to the left to engage the to flash after the bulb check, it indi- versions/markets where lock, turn the wheel slightly to the...
  • Page 22 REPLACEMENT KEYS GENERAL INFORMATION VEHICLE SECURITY ALARM — (for The Sentry Key® operates on a car- NOTE: Only Key Fobs that are versions/markets where rier frequency of 433.92 MHz. The programmed to the vehicle elec- Sentry Key® Immobilizer system will tronics can be used to start and provided) be used in the following European...
  • Page 23 REARMING OF THE 2. Perform one of the following • Grasp the Passive Entry Unlock methods to lock the vehicle: Door Handle (for versions/ SYSTEM markets, where provided), refer to • Press LOCK on the interior power If something triggers the alarm, and "Keyless Enter-N-Go™"...

  • Page 24: Remote Keyless Entry (Rke)

    • The Vehicle Security Alarm re- reconnected; the exterior lights will • The illuminated entry system mains armed during power lift- flash, the horn will sound. If this oc- will not operate if the dimmer gate entry. Pressing the liftgate curs, disarm the Vehicle Security control is in the “dome defeat”...

  • Page 25: Remote Unlock Doors And Liftgate

    REMOTE KEY UNLOCK ON above disables all RKE transmit- 3. Release both buttons at the same ter buttons for all RKE transmit- time. FIRST PRESS ters. 4. Test the feature while outside of This feature lets you program the sys- the vehicle by pressing the LOCK/ tem to unlock either the driver's side, UNLOCK buttons on the RKE trans-...

  • Page 26: Power Open/Close Power Liftgate

    POWER OPEN/CLOSE POWER OPEN/CLOSE pushed while the door is being power- closed, the door will reverse to the full POWER LIFTGATE (for LEFT POWER SLIDING open position. versions/markets, where DOOR (for versions/ If the vehicle is locked and the Vehicle provided) markets, where provided) Security Alarm is armed, pressing the...

  • Page 27: Programming Additional Transmitters

    • For vehicles not equipped with the are in the vehicle will activate the could contain dangerous mate- EVIC, perform the following steps: Vehicle Security Alarm. Opening a rials. Please dispose of them ac- door with the Vehicle Security cording to respect for environ- 1.

  • Page 28: General Information

    GENERAL INFORMATION DOOR LOCKS 2. separating RKE halves requires screw removal and gently prying the The RKE transmitter(s) and receivers MANUAL DOOR LOCKS two halves of the RKE transmitter operate on a carrier frequency of apart. Make sure not to damage the Lock the front doors by pushing down 433.92 MHz.

  • Page 29: Power Door Locks (For Versions/Markets, Where Provided)

    ignition, and any front door is open, WARNING! (Continued) the power locks will not operate. This • Do not leave the Key Fob in or prevents you from accidentally lock- near the vehicle, or in a location ing your keys in the vehicle. Remov- accessible to children, and do not ing the Key Fob or closing the door leave the ignition of a vehicle...

  • Page 30: Keyless Enter-N-Go

    Automatic Door Locks (Customer-Programmable Fea- (Customer-Programmable Fea- tures)” in “Understanding Your In- tures)” in “Understanding Your When enabled, the door locks will strument Panel” for further informa- Instrument Panel” for further lock automatically when the vehicle's tion. information. speed exceeds 24 km/h. The auto door lock feature can be enabled or NOTE: Use the Lock Doors Auto- •...
  • Page 31 front door handle to unlock the driv- To Unlock From The Passenger If one of the vehicle doors is open and er's door automatically. The interior Side: the door panel switch is used to lock door panel lock knob will raise when the vehicle, once all open doors have With a valid Passive Entry RKE the door is unlocked.

  • Page 32: Windows

    Press” or “Unlock All Doors 1st The vehicle doors can also be locked Press”). by using the RKE transmitter lock button or the lock button located on To Lock The Vehicle’s Doors the vehicle’s interior door panel. With one of the vehicle’s Passive En- WINDOWS try RKE transmitters within 1.5 m of the driver or passenger front door...
  • Page 33 ignition switch is in the ON/RUN or ACC position and during power ac- cessory delay. Power Window Lockout Switch Front Passenger Power Door Switches Front Passenger Power Window 1 - Window Open/Close Switch 2 - Power Door Locks Driver's Power Window Switches There is a single switch on the front NOTE: Power Window switches passenger's door trim panel which op-...
  • Page 34 The power window switches remain NOTE: Auto Up Reset (for versions/ active for up to 10 minutes (depend- markets, where provided) • If the window runs into any ob- ing on the accessory delay setting) To reactivate the Auto Up feature, stacle during auto-closure, it after the ignition switch has been perform the following steps after ve-...

  • Page 35: Wind Buffeting

    NOTE: The switches will not op- occurs, open the front and rear win- fully opened. This latch will keep erate if the driver has activated the dows together to minimize the buffet- your sliding door open on any in- Power Window Lockout. ing.
  • Page 36 power sliding door handle will also NOTE: The power sliding side lever in gear and vehicle speed power open or close the power sliding door must be unlocked before the at 0 km/h, the brake must be door. power sliding door switches will pressed.

  • Page 37: Sliding Side Door Child Protection

    power sliding door must be 3. Within 10 seconds of the final opened or closed manually. cycle, press the HAZARD switch ON. 4. A single chime will sound to sig- WARNING! nify that you have successfully com- pleted the programming. You, or others, could be injured if caught in the path of the sliding You can turn the feature back on by...
  • Page 38 NOTE: 3. Repeat Steps 1 and 2 on the oppo- WARNING! site sliding door. • After engaging the Child Protec- Avoid trapping anyone in the ve- tion Door Lock, always test the NOTE: hicle in a collision. Remember that door from the inside to make the sliding doors can only be •...

  • Page 39: Liftgate

    the “OFF” Master Lock Out NOTE: (RKE) transmitter button, or by acti- Switch located in the front over- vating the power door lock switches • After setting the Child Protec- head console, next to the driver. located on the front doors. tion Door Lock system, always test the door from the inside to To open the liftgate, press the liftgate...
  • Page 40 liftgate is fully open, pressing the but- NOTE: ton twice within five seconds, a sec- • If anything obstructs the power ond time, will close the liftgate. liftgate while it is closing or The power liftgate may also be opening, the liftgate will auto- opened and closed by pressing the matically reverse to the closed or button located on the overhead con-...

  • Page 41: Occupant Restraints

    • If the liftgate release button is • Supplemental Active Head Re- WARNING! activated while the power lift- straints (AHR) located on top of the • Driving with the liftgate open can gate is closing, the liftgate will front seats (integrated into the head allow poisonous exhaust gases reverse to the full open position.

  • Page 42: Lap/Shoulder Belts

    desired length to restrain a child seat Please pay close attention to the infor- stops or collisions. This feature allows or secure a large item in a seat mation in this section. It tells you how the shoulder part of the belt to move to use your restraint system properly, freely with you under normal condi- If you will be carrying children too...
  • Page 43 Lap/Shoulder Belt Operating WARNING! WARNING! (Continued) (Continued) Instructions • Wearing a seat belt incorrectly is the vehicle in a collision, increas- 1. Enter the vehicle and close the dangerous. Seat belts are de- ing head and neck injury. A belt door.
  • Page 44 WARNING! WARNING! (Continued) • A belt that is buckled into the • Do not use devices (clips, fasten- wrong buckle will not protect you ings etc.) that prevent the seat properly. The lap portion could belts from laying close to the oc- ride too high on your body, possi- cupants' bodies.
  • Page 45 hear a “click.” The retractor should Adjustable Upper Shoulder Belt WARNING! withdraw any slack in the belt. Anchorage A frayed or torn belt could rip apart In the front seats and the second row To release the small latch plate, posi- in a collision and leave you with no outboard seats, the shoulder belt an- tion the end of the large latch plate...

  • Page 46: Seat Belts In Passenger Seating Positions

    SEAT BELTS IN which are used to secure a child re- under the “Child Restraints” section. straint system. For additional infor- The chart below defines the type of PASSENGER SEATING mation, refer to “Installing Child Re- feature for each seating position. POSITIONS straints Using The Vehicle Seat Belt”...

  • Page 47: Energy Management Feature

    ENERGY MANAGEMENT SEAT BELT 3. Allow the belt to retract. As the belt retracts, you will hear a clicking FEATURE PRETENSIONERS sound. This indicates the safety belt is This vehicle has a safety belt system The seat belts for both front seating now in the Automatic Locking Mode.

  • Page 48: Supplemental Active Head Restraints (Ahr)

    SUPPLEMENTAL ACTIVE is designed to help prevent or reduce CAUTION! the extent of injuries to the driver and HEAD RESTRAINTS (AHR) All occupants, including the driver, front passenger in certain types of — (for versions/markets should not operate a vehicle or sit in rear impacts.

  • Page 49: Active Hood System

    • For safety reasons, have the Ac- tive Head Restraints checked by a qualified specialist at an au- thorized dealer. ACTIVE HOOD SYSTEM The Active Hood system is intended to enhance pedestrian protection by el- Hand Positioning Points On AHR evating the vehicle’s hood upon an 3 —...
  • Page 50 system whenever the ignition switch is the Air Bag Warning Light is illumi- in the START or ON/RUN position. If nated, or if “SERVICE ACTIVE the key is in the LOCK position, in the HOOD” appears in the EVIC, see ACC position, or not in the ignition, your authorized dealer.

  • Page 51: Enhanced Seat Belt Use Reminder System (Beltalert®)

    CAUTION! WARNING! WARNING! (Continued) (Continued) To prevent possible damage, do not • Modifications to any part of the • Drivers must be aware of pedes- slam the rear of the hood to reset it. Active Hood system could cause it trians.

  • Page 52: Seat Belts And Pregnant Women

    SUPPLEMENTAL Reminder Light and sounding an in- BeltAlert® can be enabled or disabled termittent chime. Once the sequence by your authorized dealer. LANCIA RESTRAINT SYSTEM (SRS) starts, it will continue for the entire does not recommend deactivating — AIR BAGS duration or until the respective seat- BeltAlert®.

  • Page 53: Air Bag System Components

    NOTE: The Driver and Front Pas- (SAB). Supplemental Seat- • Passenger Advanced Front Air Bag senger Advanced Front Air Bags Mounted Side Air Bags are marked • Supplemental Seat-Mounted Side are certified to regulations for Ad- with an air bag label sewn into the Air Bags (SAB) vanced Air Bags.
  • Page 54 Children 12 years old and under Never allow children to slide the WARNING! should always ride buckled up in a shoulder belt behind them or under • No objects should be placed over rear seat. their arm. or near the air bag on the instru- If the air bag system in this vehicle ment panel, because any such ob- needs to be modified to accommodate...
  • Page 55 protection to help protect an occupant the body structure. Each air bag fea- WARNING! (Continued) during a side impact. The SAB is tures inflated chambers placed adja- • Being too close to the steering marked with an air bag label sewn cent to the head of each outboard wheel or instrument panel during into the outboard side of the front...

  • Page 56: Air Bag Deployment Sensors And Controls

    Occupants, including children who front passenger. Side air bags also WARNING! (Continued) are up against or very close to SAB or work with seat belts to improve occu- • Your vehicle is equipped with left SABIC air bags can be seriously in- pant protection.
  • Page 57 Air Bags are not expected to reduce needed to help keep you in position, It also includes diagnostics that will the risk of injury in rear, side, or roll- away from an inflating air bag. illuminate the instrument cluster Air over collisions.
  • Page 58 inflator units. A large quantity of non- The ORC determines if a side collision these events, the ORC will deploy the toxic gas is generated to inflate the requires the side air bags to inflate, SABIC only on the impact side of the Advanced Front Air Bags.
  • Page 59 Front And Side Impact Sensors an event, the ignition switch must be and normally heal quickly. How- changed from IGN ON to IGN OFF. ever, if you haven't healed signifi- In front and side impacts, impact sen- cantly within a few days, or if you sors can aid the ORC in determining If A Deployment Occurs have any blistering, see your doctor...
  • Page 60 Maintaining Your Air Bag System WARNING! WARNING! (Continued) Deployed air bags and seat belt pre- • Do not attempt to modify any WARNING! tensioners can not protect you in part of your air bag system. The another collision. Have the air •...
  • Page 61 Air Bag Warning Light NOTE: If the speedometer, ta- • Whether or not the driver and pas- chometer, or any engine related senger safety belts were gauges are not working, the Occu- buckled/fastened; You will want to have the pant Restraint Controller (ORC) air bags ready to inflate for •...
  • Page 62 manufacturer, other parties, such as Children 12 years or younger should WARNING! (Continued) law enforcement, that have the spe- ride properly buckled up in a rear • In a collision, an unrestrained cial equipment, can read the informa- seat. According to crash statistics, child, even a tiny baby, can be- tion if they have access to the vehicle children are safer when properly re-...
  • Page 63 Mass Group Seating Position (or other site) Front Passen- Rear Rear Center Intermediate Intermediate Outboard Outboard Center Group 0 - Up to 10 kg Group 0+ - Up to 13 kg Group 1 - 9 to 18 kg Group II - 15 to 25 kg Group III - 22 to 36 kg Key of letters used in the table above: •...
  • Page 64 Vehicle ISOFIX Positions Chart Interme- Interme- Front diate Mass Size Rear Rear diate Other Fixture Passen- Center Group Class Outboard Center Outboard Sites LUX. SSnG Quad ISO/R1 IUF** 0 — up to 10 kg ISO/R1 IUF** ISO/R2 IUF** 0+ — up to 13 kg ISO/R3 IUF**...
  • Page 65 • IL = Suitable for particular ISOFIX • X = ISOFIX position not suitable for • ** = Inboard buckle for Left side child restraint systems (CRS) given ISOFIX child restraint systems in this seating position must be behind all in the attachment list.
  • Page 66 Infants And Child Restraints forward-facing child seat with a har- WARNING! ness for as long as possible, up to the Safety experts recommend that chil- • Never place a rear facing infant highest weight or height allowed by dren ride rearward-facing in the ve- seat in front of an air bag.
  • Page 67 should use the seat belt in a rear seat. 5. Can the child stay seated like this WARNING! (Continued) Use this simple 5-step test to decide for the whole trip? • When your child restraint is not whether the child can use the vehicle’s If the answer to any of these questions in use, secure it in the vehicle with seat belt alone:...
  • Page 68 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the ISOFIX – ISOFIX – Child + Child Lower Anchors Seat Belt + Top Lower Anchors Seat Belt Only Restraint + Top Tether Tether Anchor Only Anchor...
  • Page 69 Locating The ISOFIX Anchorages top tether anchorage and a way to tighten the strap after it is attached to the anchorage. In addition, there are tether strap anchors located be- Center Seat ISOFIX hind each rear seatback, If a child restraint installed in the near to the floor.
  • Page 70 To Install An ISOFIX-compatible 4. Attach the connectors of the child WARNING! Child Restraint restraint to the lower anchorages in Child restraint anchorages are de- the selected seating position. 1. If the selected seating position has signed to withstand only those a Switchable Automatic Locking Re- 5.
  • Page 71 Remind all children in the vehicle that the retractor and then letting the web- 2. Pull enough of the seat belt web- the seat belts are not toys and that bing retract back into the retractor. If bing from the retractor to pass it they should not play with them.
  • Page 72 7. Finally, pull up on any excess web- Child Restraint With A Cinching 5. If the child restraint has a top bing to tighten the lap portion around Latch Plate (CINCH) — (for tether strap and the seating position the child restraint while you push the versions/markets where provided) has a top tether anchorage, connect child restraint rearward and down-...
  • Page 73 child restraint. Repeat steps 4 to 6, 2. Route the tether strap to provide above, to complete the installation of the most direct path for the strap be- the child restraint. tween the anchor and the child seat. If your vehicle is equipped with adjust- If the belt still cannot be tightened able rear head restraints, raise the after you shorten the buckle, discon-...
  • Page 74 SAFETY TIPS Transporting Pets The engine oil installed in the engine at the factory is a high-quality energy Air Bags deploying in the front seat TRANSPORTING conserving type lubricant. could harm your pet. An unrestrained PASSENGERS changes should be consistent with an- pet could be thrown about and possi- ticipated climate conditions under bly injured, or injure a passenger dur-...
  • Page 75 EXHAUST GAS The best protection against carbon parts. Damaged parts must be re- monoxide entry into the vehicle body placed immediately. Do not disas- is a properly maintained engine ex- semble or modify the system. WARNING! haust system. Front seat belt assemblies must be Exhaust gases can injure or kill.
  • Page 76 to feel the air directed against the WARNING! WARNING! (Continued) windshield. See your authorized Pedals that cannot move freely can • Check mounting of mats on a dealer for service if your defroster is cause loss of vehicle control and regular basis.
  • Page 77 PERIODIC SAFETY Door Latches CHECKS YOU SHOULD Check for positive closing, latching, MAKE OUTSIDE THE and locking. VEHICLE Fluid Leaks Tires Check area under vehicle after over- night parking for fuel, engine coolant, Examine tires for excessive tread wear oil, or other fluid leaks. Also, if gaso- and uneven wear patterns.

  • Page 79: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE • MIRRORS .......82 • INSIDE DAY/NIGHT MIRROR (for versions/ markets, where provided) .
  • Page 80 • REAR CROSS PATH (for versions/markets, where provided) ......87 • MODES OF OPERATION ....88 •...
  • Page 81 • TURNING CONFIRMATION PROMPTS ON/OFF . .98 • PHONE AND NETWORK STATUS INDICATORS . .98 • DIALING USING THE MOBILE PHONE KEYPAD.......99 •...
  • Page 82 • COMMANDS ......108 • VOICE TRAINING..... . .110 •...
  • Page 83 • TO OPEN AND CLOSE THE HOOD ...128 • LIGHTS ....... .128 •...
  • Page 84 • RAIN SENSING WIPERS (for versions/markets, where provided) ......134 • TILT/TELESCOPING STEERING COLUMN ..135 •...
  • Page 85 • TURNING PARKVIEW® ON OR OFF — WITHOUT NAVIGATION/MULTIMEDIA RADIO..144 • OVERHEAD CONSOLES ....144 •...
  • Page 86 • CUPHOLDERS ......151 • INSTRUMENT PANEL CUPHOLDERS ..151 • SUPER CONSOLE (for versions/markets, where provided) .
  • Page 87 • CARGO AREA FEATURES ....160 • RECHARGEABLE FLASHLIGHT (for versions/markets, where provided)..160 • REAR WINDOW FEATURES ....160 •...

  • Page 88: Mirrors

    MIRRORS AUTOMATIC DIMMING CAUTION! MIRROR (for versions/ INSIDE DAY/NIGHT To avoid damage to the mirror dur- markets, where provided) ing cleaning, never spray any MIRROR (for versions/ cleaning solution directly onto the This mirror automatically adjusts for markets, where provided) mirror.

  • Page 89: Driver's Automatic Dimming Mirror (For Versions/Markets, Where Provided)

    DRIVER'S AUTOMATIC “Understanding the Features Of Your Vehicle” for further information. DIMMING MIRROR (for versions/markets, where HEATED MIRRORS (for provided) versions/markets, where provided) The driver's outside mirror will auto- matically adjust for glare from ve- hicles behind you. This feature is con- These mirrors are heated to Power Mirror Controls trolled by the inside automatic...

  • Page 90: Power Folding Mirrors (For Versions/ Markets, Where Provided)

    mirror will then return to the original will fold in, pressing the switch a sec- position when the vehicle is shifted ond time will return the mirrors to the out of REVERSE position. Each normal driving position. stored memory setting will have an associated Tilt Mirrors in Reverse po- sition.
  • Page 91 NOTE: • The BSM system does NOT alert the driver about rapidly ap- proaching vehicles that are out- side the detection zones. • The BSM system detection zone DOES NOT change if your ve- hicle is towing a trailer. There- Rear Detection Zones Sensor Locations fore, visually verify the adjacent...
  • Page 92 to see if an alert is necessary. The BSM system will issue an alert during these types of zone entries. Entering From The Side Vehicles that move into your adjacent lanes from either side of the vehicle. Rear Monitoring Overtaking/Passing Overtaking Traffic The BSM system is designed not to issue an alert on stationary objects...

  • Page 93: Rear Cross Path (For Versions/Markets, Where Provided)

    REAR CROSS PATH (for RCP monitors the rear detection zones on both sides of the vehicle, for versions/markets, where objects that are moving toward the provided) side of the vehicle with a minimum The Rear Cross Path (RCP) feature is speed of approximately 5 km/h, to intended to aid the driver when back- objects moving a maximum of ap-...

  • Page 94: Modes Of Operation

    Modes Operation With detected object. If the turn signal is WARNING! Uconnect® System — (for then activated, and it corresponds to RCP is not a Back Up Aid system. It versions/markets, where pro- an alert present on that side of the is intended to be used to help a vided) vehicle, an audible chime will also be...

  • Page 95: Uconnect® Phone

    Blind Spot Alert Off through your vehicle's audio system; Uconnect® Phone at a time. The the system will automatically mute Uconnect® Phone is available in Eng- When the BSM system is turned off your radio when using the Uconnect® lish, Dutch, French, German, Italian there will be no visual or audible Phone.

  • Page 96: Compatible Phones

    COMPATIBLE PHONES Voice Command Button • Prior to giving a voice command, one must wait for the beep, which Actual button location may * The Uconnect® Phone requires a follows the “Ready” prompt or an- vary with radio. The indi- mobile phone equipped with the other prompt.
  • Page 97 Voice Command Tree phone (refer to “Compatible Phones” • For identification purposes, you section to learn about the phone will be prompted to give the Refer to “Voice Tree” in this section. type). Uconnect® Phone a name for your Cancel Command mobile phone.
  • Page 98 Dial By Saying A Number stored name entry recommended. For example, say Uconnect® Phonebook or down- “Robert Smith” or “Robert” in- • Press the button to begin. loaded phonebook. To learn how to stead of “Bob”. • After the “Ready” prompt and the store a name in the phonebook , •...
  • Page 99 Uconnect® Phone automatically • Maximum of 1000 entries per Edit Uconnect® Phonebook downloads your mobile phone’s phone will be downloaded and up- Entries phonebook. dated every time a phone is con- NOTE: Editing phonebook en- nected to the Uconnect® Phone. Phonebook Download —...
  • Page 100 “Phonebook Edit” can be used to add while the Uconnect® Phone is play- • Note that only the phonebook in the another phone number to a name en- ing the desired entry and say current language is deleted. try that already exists in the phone- “Delete.”...

  • Page 101: Phone Call Features

    PHONE CALL FEATURES ANSWER OR REJECT AN call, refer to “Toggling Between Calls”. To combine two calls, refer to INCOMING CALL — CALL The following features can be ac- “Conference Call”. CURRENTLY IN PROGRESS cessed through the Uconnect® Phone PLACE/RETRIEVE A CALL if the feature(s) are available on your If a call is currently in progress and mobile service plan.

  • Page 102: Call Termination

    CALL CONTINUATION Uconnect® PHONE hear a double beep, indicating that the two calls have been joined into one FEATURES Call continuation is the progression of conference call. a phone call on the Uconnect® Phone LANGUAGE SELECTION CALL TERMINATION after the vehicle ignition has been switched to OFF.

  • Page 103: Emergency Assistance

    EMERGENCY ASSISTANCE • If supported, this number may NOTE: The Breakdown service be programmable on some sys- number has to be setup before us- If you are in an emergency and the tems. To do this, press the ing. To setup, press the button mobile phone is reachable: button and say “Setup,”...

  • Page 104: Barge In - Overriding Prompts

    You can use your Uconnect® Phone to press the button and say “Send.” Phone” to select that option without access a voice mail system or an auto- The system will prompt you to enter having to listen to the rest of the voice mated service, such as a paging ser- the name or number and say the name prompt.

  • Page 105: Dialing Using The Mobile Phone

    status when you are attempting to your call is answered, you will Phone without terminating the call. make a phone call using Uconnect® hear the audio. To transfer an ongoing call from your Phone. The status is given for network Uconnect®...

  • Page 106: Select Another Mobile Phone

    THINGS YOU SHOULD • After the “Ready” prompt and the • You can also press the button following beep, say “Setup Phone at any time while the list is being KNOW ABOUT YOUR Pairing.” played, and then choose the phone Uconnect®...

  • Page 107: Reset

    • Press the button and say the in all language modes. The System • dry weather condition. “Voice Training”, “System Train- will prompt you before resetting to • Even though the system is designed ing”, “Start Voice Training” factory settings. for users speaking in European command.

  • Page 108: Phone Far End Audio Performance

    • You can say “O” (letter “O”) for rely on the phone and network, and • Press the button. “0” (zero). not the Uconnect® Phone. • After the “Ready” prompt and the • Even though international dialing • Echo at the phone far end can following beep, say “SMS Read”...

  • Page 109: Bluetooth® Communication Link

    Bluetooth® Uconnect® Phone will prompt you to 14. Are you there yet? say the name or number of the person COMMUNICATION LINK 15. Where are we meeting? you wish to send the message to. Mobile phones have been found to 16.

  • Page 113: Voice Command

    Voice Commands Primary Alternate (s) Primary Alternate (s) Primary Alternate (s) download phone pairing pairing zero Dutch Netherlands phonebook phone book edit previous emergency redial three English select phone select four delete all erase all send five Espanol set up phone settings or phone set up...

  • Page 114: Commands

    NOTE: Take care to speak into If you ever wish to interrupt the sys- At any point, if the system does not the Voice Interface System as tem while it lists options, press the recognize one of your commands, you calmly and normally as possible.
  • Page 115 Main Menu • “Frequency #” (to change the fre- Disc Mode quency) Start a dialogue by pressing the Voice To switch to the disc mode, say Command button. You may say “Disc.” In this mode, you may say the • “Next Station” (to select the next “Main Menu”...

  • Page 116: Voice Training

    Bluetooth® Streaming (BT) Mode • “Play Memos” (to play previously In this mode, you may say the follow- recorded memos) — During the ing commands: To switch to Bluetooth® Streaming playback you may press the Voice (BT) mode, say “Bluetooth Stream- •...

  • Page 117: Seats

    once you are in that menu then say WARNING! (Continued) “Voice Training.” This will train your • Do not allow people to ride in any own voice to the system and will im- area of your vehicle that is not prove recognition.
  • Page 118 Adjusting The Seat Up Or Down WARNING! WARNING! (Continued) The height of the seats can be ad- • Adjusting a seat while driving may • Do not ride with the seatback re- justed up or down. Pull upward or be dangerous. Moving a seat while clined so that the shoulder belt is push downward on the seat switch, driving could result in loss of con-...

  • Page 119: Power Lumbar (For Versions/Markets, Where Provided)

    POWER LUMBAR (for You can choose from HIGH, LOW or WARNING! OFF heat settings. Amber indicator versions/markets, where • Persons who are unable to feel lights in each switch indicate the level provided) pain to the skin because of ad- of heat in use.

  • Page 120: Manual Front/Second Row Seat Adjuster

    MANUAL FRONT/SECOND one, indicating the change. The LOW- Press the switch once to se- level setting will turn OFF automati- lect HIGH-level heating. ROW SEAT ADJUSTER cally after a maximum of 45 minutes. Press the switch a second Both front seats are adjustable for- time to select LOW-level Rear Heated Seats ward or rearward.

  • Page 121: Manual Reclining Seats

    To recline, lean forward slightly, lift WARNING! WARNING! the lever, then push back to the de- • Adjusting a seat while driving The head restraints for all occu- sired position and release the lever. may be dangerous. Moving a seat pants must be properly adjusted Lean forward and lift the lever to while driving could result in loss...
  • Page 122 is designed to help prevent or reduce restraint. Push rearward on the bot- NOTE: the extent of injuries to the driver and tom of the head restraint to move the • The head restraints should only front passenger in certain types of head restraint away from your head.

  • Page 123: Stow 'N Go® Seating

    Second Row Stow 'n Go® WARNING! (Continued) On vehicles equipped with Stow 'n • Active Head Restraints may be Go® seats, the seats will fold and deployed if they are struck by an tumble in one motion. object such as a hand, foot or loose cargo.
  • Page 124 5. Pull upward on the seatback re- cliner lever located on the outboard side of the seat. Automatic Folding Seatback Seat In Storage Bin The seat will automatically tumble 7. Close the storage bin cover. into position for easy storage. Seatback Recliner Lever, Seat CAUTION! Tumble, And Head Restraint Fold...
  • Page 125 WARNING! WARNING! (Continued) • In a collision, you or others in • Keep the storage bin covers your vehicle could be injured if closed and latched while the ve- seats are not properly latched to hicle is in motion. their floor attachments. Always •...

  • Page 126: Quad Seats (For Versions/Markets, Where Provided)

    QUAD SEATS (for Easy Entry Second Row WARNING! versions/markets, where The second row Stow 'n Go® seats • Adjusting a seat while driving provided) allow easy entry to the third row seat may be dangerous. Moving a seat or rear cargo area. while driving could result in loss Both Quad seats are adjustable for- of control which could cause a...
  • Page 127 For passengers seated in the third row, there is a pull strap located on the outboard side of the seat near the bottom of the seat back. Third row passengers can pull on the strap and push the Quad seat forward for fold- ing the seatback and accessing the easy entry lever.
  • Page 128 With the seat in its fold-flat position, WARNING! pull upward on the easy-access re- To reduce the risk of personal in- lease lever and lift the seat into the jury: desired position. • Retainer strap must always be se- curely attached to grab handle when seat is folded forward and vehicle is moving.

  • Page 129: Third Row Power Recline (For Versions/Markets, Where Provided)

    THIRD ROW POWER NOTE: Lower the head restraint Left and right third row seats can be by pulling on the release strap folded individually or together. The RECLINE (for marked “1” located on the out- third row power folding seat adjusts versions/markets, where board side of the head restraint.

  • Page 130: Manually Folding Third Row Seats (For Versions/Markets, Where Provided)

    • To abort seat operation while 2. Lower the outboard head re- seat is in motion, press a differ- straints by pulling on the release strap ent seat position selector switch marked “1” located on the outboard to stop the seat. Once the seat side of the head restraint.

  • Page 131: Plastic Grocery Bag Retainer Hooks

    DRIVER MEMORY SEAT To Unfold Third Row Seats Tailgate Mode (for versions/markets, 1. Pull up on the assist strap to lift 1. Pull release strap “3”, then pull the seat out of the storage bin and release strap “4” to rotate the entire where provided) push the seat forward until the an- seat rearward.

  • Page 132: Setting Memory Positions And Linking Rke Transmitter To Memory

    SETTING MEMORY 5. Turn on the radio and set the radio 12. Repeat the above steps to set the station presets (up to 10 AM and 10 next Memory position using the other POSITIONS AND LINKING FM stations can be set). numbered Memory button or to link RKE TRANSMITTER TO another RKE transmitter to memory.

  • Page 133: Easy Entry/Exit Seat (Available With Memory Seat Only)

    pedals stop moving. A delay of one disabled at one time. Refer to • When you remove the key from the second will occur before another re- “Electronic Vehicle Information ignition switch the driver seat will call can be selected. Center (EVIC)/Customer- move to a position 8 mm forward of...

  • Page 134: To Open And Close The Hood

    you. For details, refer to “Elec- WARNING! tronic Vehicle Information Center Be sure the hood is fully latched (EVIC)/Customer-Programmable before driving your vehicle. If the Features” in “Understanding Your hood is not fully latched, it could Instrument Panel” for further in- open when the vehicle is in motion formation.

  • Page 135: Interior Lighting

    INTERIOR LIGHTING HEADLIGHTS specific areas to aid the occupants in locating specific features while driv- Interior lights are turned on when a ing at night. door or liftgate is opened, the Remote Turn the headlight switch The Halo control switch is located to Keyless Entry (RKE) transmitter is knob to the second detent to the right of the dimmer switch.

  • Page 136: Headlights On With Wipers (For Versions/Markets, Where Provided)

    HEADLIGHT DELAY (for NOTE: The engine must be run- If the headlights are turned off before ning before the headlights will the ignition, they will turn off in the versions/markets, where come on in the Automatic mode. normal manner. provided) HEADLIGHTS ON WITH NOTE: The headlights must be This feature provides the safety of...

  • Page 137: Battery Protection

    TURN SIGNALS come on. Press the switch a second lights will turn off automatically until time and the rear fog lights will come the next cycle of the ignition switch or Move the multifunction lever up or on (front fog lights stay on). Press the headlight switch.

  • Page 138: Flash-To-Pass

    HEADLIGHT LEVELING from low beams to high beams. Pull- cause headlights to remain on lon- ing back to the neutral position re- ger (closer to the vehicle). Also, SYSTEM (for versions/ turns the headlights to the low beam dirt, film and other obstructions markets, where provided) operation.

  • Page 139: Windshield Wipers And Washers

    NOTE: Always remove wiping cycle. To use the Washer, push All seating positions occupied, buildup of snow that prevents the on the end of the lever to the second plus an evenly distributed windshield wiper blades from re- detent and hold while spray is desired. load in the luggage compart- turning to the off position.

  • Page 140: Rear Wiper And Washer

    18 second between cycles (first de- wiping sensitivity, they may select WARNING! tent), to a cycle every one second sensitivity positions 4 or 5. If the op- Sudden loss of visibility through (fifth detent). erator desires less wiping sensitivity, the windshield could lead to a col- they may select sensitivity positions 2 NOTE: If the vehicle is moving lision.

  • Page 141: Tilt/Telescoping Steering Column

    (Customer-Programmable Fea- unless the wiper control on the mul- shorten the steering column, pull the tures)” in “Understanding Your tifunction lever is moved or the steering wheel outward or push it in- Instrument Panel” for further shift lever is moved out of the NEU- ward as desired.

  • Page 142: Electronic Speed Control

    The switch is located on the left side of Cruise Control Engaged” or “Ad- WARNING! the steering column. justable Pedal Disabled — Vehicle Do not adjust the pedals while the In Reverse”. vehicle is moving. You could lose NOTE: control and have an accident. Al- ways adjust the pedals while the •...

  • Page 143: To Activate

    TO SET A DESIRED SPEED TO VARY THE SPEED to shut down if multiple Speed Control functions are operated at SETTING Turn the Electronic Speed Control the same time. If this occurs, the ON. When the vehicle has reached the When the Electronic Speed Control is Electronic Speed Control System desired speed, press the SET (-) but-...

  • Page 144: To Accelerate For Passing

    speed. Each subsequent tap of the ParkSense® can be active only when WARNING! button results in a decrease of the shift lever is in REVERSE. If Electronic Speed Control can be 1.6 km/h. ParkSense® is enabled at this shift dangerous where the system cannot lever position, the system will remain TO ACCELERATE FOR maintain a constant speed.

  • Page 145: Parksense® Display

    (EVIC). Refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Features)” in “Understanding Your Instrument Panel” for further infor- mation. The ParkSense® Warning Display is located in the Instrument cluster’s Park Assist System ON Slow Tone EVIC display. It provides both visual and audible warnings to indicate the distance between the rear fascia/ bumper and the detected obstacle.

  • Page 146: Enabling/Disabling Parksense

    The vehicle is close to the obstacle warning alert operation when the sys- when the EVIC display shows one tem is detecting an obstacle: flashing arc and sounds a continuous tone. The following chart shows the WARNING ALERTS Rear Distance Greater than 200-100 cm 100-65 cm...

  • Page 147: Cleaning The Park Assist System

    instrument cluster will actuate a snow, ice, mud, dirt or other obstruc- • When you turn ParkSense® off, single chime, once per ignition cycle, tion and then cycle the ignition. If the the instrument cluster will dis- and it will display the “PARKSENSE message continues to appear, see an play “PARK ASSIST SYSTEM UNAVAILABLE WIPE REAR SEN-...
  • Page 148 could provide a false indication CAUTION! WARNING! that an obstacle is behind the • ParkSense® is only a parking aid • Drivers must be careful when fascia/bumper. and it is unable to recognize every backing up even when using • Ensure that the ParkSense® sys- obstacle, including small ob- ParkSense®.

  • Page 149: Parkview® Rear Back Up Camera (For Versions/Markets, Where Provided)

    PARKVIEW® REAR When the vehicle is shifted out of RE- WARNING! (Continued) VERSE, the rear camera mode is ex- BACK UP CAMERA (for • Before using ParkSense®, it is ited and the navigation or audio versions/markets, where strongly recommended that the screen appears again.

  • Page 150: Turning Parkview® On Or Off - With Navigation/Multimedia Radio

    TURNING PARKVIEW® ON WARNING! CAUTION! (Continued) OR OFF — WITHOUT Drivers must be careful when back- • To avoid vehicle damage, the ve- NAVIGATION/ ing up even when using the hicle must be driven slowly when MULTIMEDIA RADIO ParkView® Rear Back Up Camera. using ParkView®...

  • Page 151: Courtesy/Interior Lighting

    NOTE: Premium sunroof console direction of these lights by pressing The door will slowly rotate to the full models include all of above except the outside ring, which is identified open position. sunglass storage. with four directional arrows (LED lamps only). The area around the instrument panel cupholders is also illuminated from a light in the overhead console (premium...

  • Page 152: Rear Courtesy/Reading Lights (For Versions/Markets, Where Provided)

    To return to the full open position, the door must first be closed and then opened by pressing the latch again to release. REAR COURTESY/ READING LIGHTS (for versions/markets, where provided) Reading Lights Overhead Compartment Features REAR OVERHEAD 1 — DVD 5 —...

  • Page 153: Power Sunroof (For Versions/Markets, Where Provided)

    POWER SUNROOF (for OPENING SUNROOF — WARNING! EXPRESS versions/markets, where • Never leave children alone in a provided) vehicle, or with access to an un- Press the switch rearward and release locked vehicle. Never leave the it within one-half second and the sun- The power sunroof switch is located key fob in or near the vehicle.

  • Page 154: Closing Sunroof - Express

    CLOSING SUNROOF — WIND BUFFETING detected, the sunroof will automati- cally retract. Remove the obstruction EXPRESS Wind buffeting can be described as if this occurs. Next, press the switch the perception of pressure on the ears Press the switch forward and release it forward and release to Express Close.

  • Page 155: Electrical Power Outlets

    switch is turned to the LOCK posi- also connected to the battery. Do not tion. Opening either front door will exceed a maximum power of 160 cancel this feature. Watts (13 Amps) shared between the lower panel outlet and the removable For Vehicles Equipped With The floor console outlet.

  • Page 156: Smokers Package Kit

    Each of these outlets can support 160 WARNING! CAUTION! (Continued) Watts (13 Amps). Do not exceed 160 To avoid serious injury or death: • Accessories that draw higher Watts (13 Amps) for each of these • Only devices designed for use in power (i.e., coolers, vacuum outlets.

  • Page 157: Power Inverter (For Versions/Markets, Where Provided)

    CUPHOLDERS the ash receiver, align the receiver so The power inverter switch is located the thumb grip on the lid is facing on the instrument panel below the There cupholders located rearward. Press the ash receiver into climate controls. throughout the interior. All liners are either of the cup wells to secure.

  • Page 158: Super Console (For Versions/Markets, Where Provided)

    INTERIOR BOTTLE wells. The cupholders are designed to accommodate a wide variety of con- HOLDERS tainer types and sizes. Press down on There are four bottle holders located the container to engage the cupholder in the interior. One bottle holder is retention features.

  • Page 159: Smoker's Package Kit (For Versions/Markets, Where Provided)

    STORAGE Two outboard mesh pockets are on Lower Glove Compartment intermediate seating. The mesh pock- To open the lower compartment pull GLOVE COMPARTMENTS ets are flexible enough to hold juice out on the release handle. boxes, toys, games or MP3 players, Upper and lower glove compartments etc.

  • Page 160: Driver Seatback Storage (For Versions/ Markets, Where Provided)

    DRIVER SEATBACK CAUTION! STORAGE (for The storage bin cover must lay flat versions/markets, where and be locked to avoid damage provided) from contact with the front seat tracks, which have minimal clear- The drivers seatback has a primary ance to the cover. storage pocket on all models and an optional secondary mesh pocket.

  • Page 161: Storage Bin Safety Warning

    STORAGE BIN SAFETY Seat Storage Bin Cover WARNING! (Continued) Emergency Release Lever WARNING • Do not operate the storage bin As a security measure, the Seat Stor- Carefully follow these warnings to covers while the vehicle is in mo- age Bin Cover has an Emergency Re- help prevent personal injury or dam- tion.

  • Page 162: Center And Rear Overhead Console Storage (For Version/Markets, Where Provided)

    CENTER AND REAR COAT HOOKS NOTE: With all rear seats stowed or removed, 1.2 x 2.4 m sheets of OVERHEAD CONSOLE Coat hooks are located along the building material will fit on the STORAGE (for headliner for the second and third row vehicle floor with the liftgate version/markets, where seating positions.

  • Page 163: Basic Console

    • The basic console is removable 4. Reinstall the clip first and then WARNING! from the vehicle for additional floor while pushing downward on the con- Do not operate this vehicle with a space by removing the cap and clip sole with slight pressure, reinstall the console compartment lid in the at the console base.
  • Page 164 • Upper storage bin can hold nine This provides easy access to the stor- regular or 18 thin CDs or other age area below and provides two of items the four cupholders for the second row passengers. • Large console center storage will store headphones for the available rear DVD entertainment system or other items...

  • Page 165: Super Console (For Versions/Markets, Where Provided)

    To Remove The Premium Floor The super console tambour doors are WARNING! Console opened by pushing down on the finger In an accident, serious injury could tabs and sliding the door. The front 1. Pull up on the bottom release result if the removable floor console tambour door slides forward, the rear handle in the front of the console.

  • Page 166: Cargo Area Features

    REAR WINDOW Located in the back of the super con- Press in on the flashlight to release it. sole is a storage drawer and cuphold- FEATURES ers for the rear passengers. REAR WINDOW DEFROSTER The rear window defroster button is located on the cli- mate control (Mode) knob.

  • Page 167: Roof Luggage Rack (For Versions/Markets, Where Provided)

    ROOF LUGGAGE RACK • To prevent excessive battery load must not exceed 68 kg, and drain, use the rear window de- should be uniformly distributed over (for versions/markets, froster only when the engine is the luggage rack crossbars. where provided) operating.
  • Page 168 Then, position the crossbars across Once the crossbars are set into posi- CAUTION! the roof. tion, tighten the thumb screws com- Use care when removing and han- pletely. NOTE: The crossbars are identi- dling the crossbars to prevent dam- cal and can be placed in any two of age to the vehicle.

  • Page 169: Headlight Washer (For Versions/Markets, Where Provided)

    CAUTION! WARNING! (Continued) Cargo must be securely tied before • The load should be secured and driving your vehicle. Improperly placed on top of the crossbars, not secured loads can fly off the vehicle, directly on the roof. If it is neces- particularly at high speeds, result- sary to place the load on the roof, ing in personal injury or property...

  • Page 170: Sun Screens (For Versions/Markets, Where Provided)

    windshield washers will spray the Gently pull up on the tab to raise the windshield and the windshield wipers sun screen. Continue pulling the sun will cycle. screen until the tab is near the top of the window. NOTE: After turning the ignition switch and headlights ON, the Once the screen is completely to the headlight washers will operate on...

  • Page 171: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL • INSTRUMENT PANEL FEATURES ... .169 • INSTRUMENT CLUSTER — GASOLINE ..170 • INSTRUMENT CLUSTER — DIESEL ..171 •...
  • Page 172 • KEYLESS ENTER-N-GO™ DISPLAY (for versions/markets, where provided) ..186 • COMPASS / TEMPERATURE DISPLAY (for versions/markets, where provided) ..186 • CUSTOMER-PROGRAMMABLE FEATURES (SYSTEM SETUP) ..... .189 •...
  • Page 173 • PLAY A DVD USING THE TOUCH-SCREEN RADIO .......198 • PLAY A DVD USING THE VES™ PLAYER (for versions/markets, where provided).
  • Page 174 • INFORMATION MODE DISPLAY ...209 • NUMERIC KEYPAD MENU ....209 • DISC MENU ......209 •...

  • Page 175: Instrument Panel Features

    INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Analog Clock 9 — DVD (for versions/ 13 — Ignition Switch/Button markets, where provided) 2 — Instrument Cluster 6 — Upper Glove Compart- 10 — Storage Bin 14 — Hood Release ment 3 —...

  • Page 176: Instrument Cluster - Gasoline

    INSTRUMENT CLUSTER — GASOLINE...

  • Page 177: Instrument Cluster - Diesel

    INSTRUMENT CLUSTER — DIESEL...

  • Page 178: Instrument Cluster Descriptions

    INSTRUMENT CLUSTER the signal off. If either indicator LoW tirE flashes at a rapid rate, check for a DESCRIPTIONS When the appropriate condition ex- defective outside light bulb. ists, the odometer display will toggle 1. Tachometer 5. High Beam Indicator between LoW and tirE for three The red segments indicate the maxi- cycles.
  • Page 179 CHAngE OIL 3. Turn the ignition switch to the Anti-Lock portion of the brake sys- OFF/LOCK position. tem is not functioning and that service Your vehicle is equipped with an en- is required. However, the conven- gine oil change indicator system. The NOTE: If the indicator message tional brake system will continue to...
  • Page 180 that illuminates a low tire pressure system detects a malfunction, the tell- CAUTION! telltale when one or more of your tires tale will flash for approximately one The TPMS has been optimized for is significantly under-inflated. Ac- minute and then remain continuously the original equipment tires and cordingly, when the low tire pressure illuminated.
  • Page 181 not come on when turning the key this light remains on after several ig- WARNING! from OFF to ON/RUN, have the con- nition cycles, and the vehicle has been A malfunctioning catalytic con- dition checked promptly. driven several kilometers at speeds verter, as referenced above, can greater than 48 km/h, see your autho- Certain conditions, such as a loose or...
  • Page 182 11. Electronic Stability Control while driving, have the system in- 17. Vehicle Security Light (for (ESC) OFF Indicator Light (for spected at an authorized dealer as versions/markets, where provided) versions/markets, where provided) soon as possible. Refer to “Occupant This light will flash at a fast Restraints”...
  • Page 183 corrected. If the problem is related to The light also will turn on when the WARNING! the brake booster, the ABS pump will parking brake is applied with the ig- Driving a vehicle with the red brake run when applying the brake and a nition switch in the ON/RUN posi- light on is dangerous.

  • Page 184: Electronic Vehicle Information Center (Evic) (For Versions/Markets, Where Provided)

    20. Temperature Gauge WARNING! The temperature gauge shows engine A hot engine cooling system is dan- coolant temperature. Any reading gerous. You or others could be within the normal range indicates badly burned by steam or boiling that the engine cooling system is op- coolant.

  • Page 185: Electronic Vehicle Information Center (Evic) Displays

    • Turn Menu Off SELECT Button 3. The reconfigurable telltales sec- tion below the odometer line. The system allows the driver to select The SELECT button allows The main display area will normally information by pressing the following access to information in display the main menu or the screens buttons mounted on the steering EVIC submenus, selects...
  • Page 186 • Unstored Messages When the appropriate conditions ex- • Turn Signal On This message type is displayed indefi- ist, the EVIC displays the following • RKE Battery Low nitely or until the condition that acti- messages: vated the message is cleared. Ex- •...

  • Page 187: Evic White Telltale Lights

    due to sensor blockage, electronic “Exhaust System Regeneration Re- • Exhaust Filter Full — Power Re- quired Now” message will be dis- interference, or other "temporary" duced See Dealer. The PCM derates played on the EVIC. By driving your conditions. When this message is the engine in order to limit the like- vehicle at highway speeds for as little displayed both outside rear view...

  • Page 188: Evic Amber Telltale Lights

    (ERS) feature has been engaged and • Low Fuel Light • Wait To Start Light — Diesel the gear selected is displayed. For fur- Engines Only When the fuel level reaches ther information (for approximately 11.0 L this The Wait To Start Light will versions/markets, where provided), light will turn on, and remain on until turn on when the ignition key...
  • Page 189 • Door Ajar non-essential electrical devices or in- If the light remains lit with the engine crease engine speed (if at idle). If the running, your vehicle will usually be This light will turn on to charging system light remains on, it drivable.

  • Page 190: Oil Change Due

    If the tempera- To reset the oil change indicator sys- WARNING! ture reading does not return to nor- tem please refer to a Lancia Dealer- If you continue operating the ve- mal, turn the engine off immediately ship.

  • Page 191: Vehicle Speed

    TRIP INFO fuel. Adding a significant amount of fuel to the vehicle will turn off the Press and release the UP or DOWN but- “LOW FUEL” message and a new ton until “Trip Info” is highlighted in DTE value will display. the EVIC and press the SELECT but- Instantaneous Fuel Economy (IFE) ton.

  • Page 192: Tire Bar

    TIRE BAR MESSAGES KEYLESS ENTER-N-GO™ DISPLAY (for Press and release the UP or DOWN Press and release the UP or DOWN versions/markets, where button until ”Tire BAR” displays button until “Messages: XX” displays provided) highlighted in the EVIC. Press the highlighted in the EVIC.
  • Page 193 may need to be driven several min- Manual Compass Calibration (for Compass Variance utes before the updated tempera- versions/markets, where Compass Variance is the difference ture is displayed. Engine tempera- provided) between Magnetic North and Geo- ture can also affect the displayed If the compass appears erratic and the graphic North.
  • Page 194 Compass Variance Map 1. Turn the ignition switch ON. 3. Press the DOWN button until the 4. Press and release the SELECT “Compass Variance” message is dis- button until the proper variance zone 2. Press the UP or DOWN button un- played in the EVIC, then press the is selected, according to the map.

  • Page 195: Customer-Programmable Features (System Setup)

    CUSTOMER- (for versions/markets, where pro- Enable/Disable the Rear Park vided). Press the UP or DOWN button Assist System (for versions/ PROGRAMMABLE while in this display and scroll markets, where provided) FEATURES (SYSTEM through the language choices. Press The Rear Park Assist system will scan SETUP) the SELECT button to select English, for objects behind the vehicle when...
  • Page 196 selection, press and release the SE- RKE Linked To Memory (for the SELECT button until a check- LECT button until a check-mark ap- versions/markets, where mark appears next to the feature pears next to the feature showing the provided) showing the system has been acti- system has been activated or the vated or the check-mark is removed When this feature is selected the...
  • Page 197 highlighted, then press and release the Intermittent Wiper Options (for or down until the preferred setting is SELECT button until a check-mark versions/markets, where highlighted, then press and release the appears next to the setting, showing provided) SELECT button until a check-mark that the setting has been selected.
  • Page 198 check-mark appears next to the fea- button until a check-mark appears Blind Spot Alert (for ture showing the system has been ac- next to the feature showing the system versions/markets, where tivated or the check-mark is removed has been activated or the check-mark provided) showing the system has been deacti- is removed showing the system has...

  • Page 199: Sound Systems

    SOUND SYSTEMS NOTE: If your vehicle has experi- This feature allows an iPod® or exter- enced any damage in the area nal USB device to be plugged into the Refer to your Sound Systems Booklet. where the sensor is located, even if USB port, located in the glove com- the fascia is not damaged, the sen- partment.

  • Page 200: Connecting The Ipod® Or External Usb Device

    CONNECTING THE iPod® Once the audio device is connected • The audio device can be controlled and synchronized to the vehicle's using the radio buttons to Play, OR EXTERNAL USB iPod®/USB/MP3 control system Browse, List iPod® DEVICE (iPod® or external USB device may contents.

  • Page 201: List Or Browse Mode

    mode. In Play mode, the following • A single press backward << RW or • Press the SCAN button to use buttons on the radio faceplate may be forward FF>> will jump backward iPod®/USB/MP3 device scan used to control the iPod® or external or forward respectively, for five sec- mode, which will play the first 10 USB device and display data:...
  • Page 202 • TUNE control knob: The TUNE • In List mode, the radio PRESET iPod® or external USB device sub- control knob functions in a similar buttons are used as shortcuts to menu levels are available on this manner as the scroll wheel on the the following lists on the iPod®...

  • Page 203: Bluetooth Streaming Audio (Btsa)

    refers to Screen 2 (third row). Refer WARNING! to the Dual Video Screen section for Do not plug in or remove the iPod® more information. or external USB device while driv- Blu-ray® PLAYER ing. Failure to follow this warning could result in an accident. Play A Blu-ray Disc BLUETOOTH STREAMING To view a Blu-ray insert the disc into...

  • Page 204: Play Video Games

    LISTEN TO AN AUDIO • Touch the 1 soft-key to select an audio channel, then touch the SOURCE ON CHANNEL 2 VES™ Disc soft-key in the media WHILE A VIDEO IS column. PLAYING ON CHANNEL 1 Using the Remote Control Ensure the Remote Control and •...
  • Page 205 2. Insert the DVD with the label fac- NOTE: NOTE: ing up. The radio automatically se- • Channel/Screen 1 select mode • To view a DVD on the radio lects the appropriate mode after the information is shown on the left press the RADIO/MEDIA hard- disc is recognized and displays the side of the screen.

  • Page 206: Play A Dvd Using The Ves™ Player

    PLAY A DVD USING THE 2. While looking at Screen 1 or 2, 3. Touch the 1 or 2 soft-key and then highlight VES DISC by either press- the DISC soft-key in the VES column. VES™ PLAYER (for ing Up/Down/Left/Right buttons or To exit touch the back arrow soft-key versions/markets, where by repeatedly pressing the SOURCE...

  • Page 207: Play A Blu-Ray Disc Using The Blu-Ray Player (For Versions/Markets, Where Provided)

    PLAY A Blu-ray DISC 2. While looking at Screen 1 or 2, 3. Touch the 1 or 2 soft-key and then highlight Blu-ray by either pressing the VES™ Disc soft-key in the VES™ USING THE BLU-RAY Up/Down/Left/Right buttons or by column.

  • Page 208: Listen To An Audio Source While A Video Is Playing

    LISTEN TO AN AUDIO • Selecting a video source on Channel 2, the video source will display on SOURCE WHILE A VIDEO the third row screen or Screen 2 and IS PLAYING can be heard on Channel 2. Ensure the Remote Control and •...
  • Page 209 Controls And Indicators 5. ►► – In radio modes, press to audio on a data disc, PROG Up selects seek the next tunable station. In disc the next directory and PROG Down 1. Power – Turns the screen and modes, press and hold to fast forward selects the previous directory.

  • Page 210: Blu-Ray Player Remote Control (For Versions/Markets, Where Provided)

    Blu-ray PLAYER REMOTE VES™ mode is selected and the disc is 4. Channel/Screen Selector Switch - stopped, press the SETUP button to Indicates which channel is being con- CONTROL (for access the DVD Setup menu. (see the trolled by the remote control. When versions/markets, where DVD Setup Menu of this manual.) the selector switch is in the Rear 1...

  • Page 211: Remote Control Storage

    REMOTE CONTROL LOCKING THE REMOTE 10. POPUP/MENU – Press to access the Blu-ray main menu when in Blu- STORAGE CONTROL ray or DVD mode. Press to start Scan The video screen(s) come with a built All remote control functionality can or start Random track functions in in storage compartment for the re- be disabled as a parental control fea-...

  • Page 212: Batteries

    REPLACING THE REMOTE If no audio is heard after increasing Front seat occupants receive some the volume control, verify that the headphone audio coverage to allow CONTROL BATTERIES screen is turned on and in the down them to adjust the headphone volume The remote control requires two AAA position and that the channel is not for the young rear seat occupants that...

  • Page 213: Controls

    CONTROLS REPLACING THE • When both switches are on Channel 2, the Remote is con- HEADPHONE BATTERIES The headphone power indicator and trolling Channel 2 and the head- controls are located on the right ear Each set of headphones requires two phones are tuned to the audio of cup.

  • Page 214: System Information

    How Long Does The Coverage states and jurisdictions may not allow vehicle speakers. When the radio and Last? This warranty lasts as long as the exclusion or limitation of incidental VES™ channel 1 or 2 are in the same you own the Product. or consequential damages, so the above (shared) mode, a VES™...
  • Page 215 1. CD: Ability to Fast Forward, Re- 2. Channel 1 Audio Only/Mute 3. To delete the last digit, navigate to wind, Scan, and Track Up/Down. the Del button and press the remote 3. Channel 2 Audio Only/Mute control’s ENTER/OK button. 2.
  • Page 216 To change the settings, press the re- button. This will automatically se- • CD Data discs with MP3 and WMA mote control’s navigation buttons (▲, lect the next available audio mode compressed audio format files ▼) to select an item, then press the without using the MODE/SOURCE •...
  • Page 217 incorrect playback, do not use these • Maximum frame rate for pro- have a Video title, but the Video title is extensions for any other types of gressive source 30 frames per ignored). All multi - channel program files. second material is automatically mixed down to two channels, which may result in a •...
  • Page 218 format and is playable on other play- • Mixed disc which contains "DivX" • The DVD player always uses the ers. To help avoid playback problems, will be priority played on Blu-ray file extension to determine the au- use the following guidelines when re- Disc Player .
  • Page 219 player will automatically skip the ejected. A dirty, damaged, or incom- cold weather conditions. When this file and begin playing the next patible disc format are all potential occurs, allow the vehicles interior available file. causes for a "Disc Error" message. temperature to warm, then insert disc into player.
  • Page 220 • Using the remote control Up and please contact the dealer where the must enter the correct password using Down cursor buttons, highlight the vehicle was purchased. the password entry method described Language item you want to edit, below. Lan- Code Lan- Code...
  • Page 221 To set the password, activate the DVD remote control’s Right cursor but- • Enter the current password. Select Setup Menu and follow these addi- ton to select digits, enter the new a digit, use the remote control’s Up tional instructions: password.
  • Page 222 • THIS PRODUCT IS LICENSED VC-1 STANDARD ("VC-1 http://www.cinavia.com. To request UNDER PATENT VIDEO") AND/OR (ii) DECODE additional information about Cinavia PORTFOLIO LICENSE FOR THE VC-1 VIDEO THAT WAS EN- by mail, send a postcard with your PERSONAL NON- CODED BY A CONSUMER EN- mailing address to: Cinavia Consumer COMMERCIAL USE OF A CON- GAGED IN A PERSONAL AND...
  • Page 223 STEERING WHEEL Macrovision. Reverse engineering play purchased DivX Video-on- or disassembly is prohibited. Demand (VOD) movies. To obtain AUDIO CONTROLS your registration code, locate the • Manufactured under license under DivX VOD section in your device U.S. Patent #’s: 5,451,942; setup menu.
  • Page 224 The left-hand rocker switch has a If you press the switch up or down 7. Do not store the disc where tem- pushbutton in the center. The func- twice it plays the second track; three peratures may become too high. tion of the left-hand switch is differ- times, it will play the third, etc.
  • Page 225 CLIMATE CONTROLS The Three-Zone ATC system auto- 3. Mode Display matically maintains the interior com- This display shows the current Mode The Climate Control system allows fort level desired by the driver and all selection (Panel, Bi-Level, Floor, you to regulate the temperature, passengers.
  • Page 226 manual mode. The blower will engage release to select. Refer to “Automatic 17. SYNC Button immediately if the Defrost mode is Operation” for more information. Press and release to control the tem- selected. Performing this function will cause perature setting for all three zones the ATC to switch between manual 9.
  • Page 227 3. When the system is set up for your if the Defrost mode is selected, or by NOTE: comfort level, it is not necessary to changing the front blower knob set- • If the system is in Mix, Floor or change the settings.
  • Page 228 Controlling The Rear Climate 2. Rear Temperature Display Bi-Level Mode Controls From The Front ATC This display shows the temperature Air comes from both the head- Panel setting for the rear seat occupants. liner outlets and the floor The Three-Zone ATC system allows outlets.
  • Page 229 Pressing the Rear Temperature Lock 1. Press the Rear Temperature Lock NOTE: button on the front ATC panel, illumi- button on the front ATC panel. This • It is not necessary to move the nates a lock symbol in the rear dis- turns off the Rear Temperature Lock temperature settings for cold or play.
  • Page 230 Rear Mode Control Recirculation Control CAUTION! Auto Mode When outside air contains Interior air enters the Rear Auto- smoke, odors, or high hu- matic Temperature Control System The rear system automatically main- midity, or if rapid cooling is through an intake grille, located in tains the correct mode and comfort desired, you may wish to the right side trim panel behind the...
  • Page 231 and to protect against engine over- adequate system lubrication to mini- and pollen from the air. Refer to “Air heating. A solution of 50% ethylene mize the possibility of compressor Conditioning” in “Maintaining Your glycol antifreeze coolant and 50% damage when the system is started Vehicle”...

  • Page 233: Starting And Operating

    STARTING AND OPERATING • STARTING PROCEDURES ....231 • AUTOMATIC TRANSMISSION ... . .231 •...
  • Page 234 • PARKING BRAKE ......245 • ANTI-LOCK BRAKE SYSTEM (ABS)...246 •...
  • Page 235 • Tire Spinning ......263 • Tread Wear Indicators ....264 •...
  • Page 236 • RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) ........284 •...

  • Page 237: Starting Procedures

    STARTING WARNING! CAUTION! (Continued) (Continued) PROCEDURES • Do not leave the key fob in or near • Shift into PARK only after the the vehicle, or in a location acces- vehicle has come to a complete Before starting your vehicle, adjust sible to children, and do not leave stop.

  • Page 238: Keyless Enter-N-Go™ (For Versions/Markets, Where Provided)

    ignition switch to the LOCK position, 3. Press firmly on the center of the and hold the brake pedal while press- wait 10 to 15 seconds, then repeat the button to secure it into position. ing the ENGINE START/STOP but- “Normal Starting”...

  • Page 239: Extreme Cold Weather (Below −29°C)

    IF ENGINE FAILS TO EVIC will display a “Vehicle Not In • Starting with the ignition switch in Park” message and the engine will the OFF position: START remain running. Never leave a vehicle • Press the ENGINE START/STOP out of the PARK position, or it could button once to change the ignition WARNING! roll.

  • Page 240: After Starting

    AFTER STARTING accelerator pedal and the brake pedal, WARNING! (Continued) wait 10 to 15 seconds, then repeat the The idle speed is controlled automati- • If the vehicle has a discharged “Normal Starting” procedure. cally and it will decrease as the engine battery, booster cables may be Clearing A Flooded Engine (Using warms up.
  • Page 241 Starting And Operating Cautions proper lubrication of the turbo- CAUTION! – Diesel Engine charger. This is particularly neces- To prevent damage to the starter, sary after any period of hard driv- DO NOT crank the engine for more ing. WARNING! than 15 second intervals at one Turbocharger Cool Down time.

  • Page 242: Automatic Transmission

    AUTOMATIC WARNING! WARNING! (Continued) TRANSMISSION • It is dangerous to shift out of • When leaving the vehicle, always PARK or NEUTRAL if the engine remove the key fob and lock your speed is higher than idle speed. If vehicle. CAUTION! your foot is not firmly pressing •...

  • Page 243: Key Ignition Park Interlock

    KEY IGNITION PARK To shift the transmission out of PARK, the ignition switch must be turned to INTERLOCK the ON/RUN position (engine run- This vehicle is equipped with a Key ning or not) and the brake pedal must Ignition Park Interlock which re- be pressed.
  • Page 244 GEAR RANGES an added precaution, turn the front WARNING! (Continued) wheels toward the curb on a downhill DO NOT race the engine when shift- • It is dangerous to shift out of grade, and away from the curb on an ing from PARK or NEUTRAL into PARK or NEUTRAL if the engine uphill grade.
  • Page 245 REVERSE (R) WARNING! CAUTION! (Continued) This range is for moving the vehicle • Before moving the shift lever out • When leaving the vehicle, always backward. Shift into REVERSE only of PARK, you must place the ig- remove the key fob and lock your after the vehicle has come to a com- nition from the LOCK/OFF posi- vehicle.
  • Page 246 Range Select (ERS) shift control (de- could result in transmission damage, CAUTION! scribed below) to select a lower gear Transmission Limp Home Mode is ac- Towing the vehicle, coasting, or range. Under these conditions, using a tivated. In this mode, the transmis- driving for any other reason with lower gear range will improve perfor- sion remains in third gear regardless...
  • Page 247 NOTE: Even if the transmission (except to prevent engine overspeed), To exit ERS mode, simply press and can be reset, we recommend that but will shift down into second and hold the shift lever to the right (+) you visit your authorized dealer at first gears normally.

  • Page 248: Driving On Slippery Surfaces

    • The engine coolant has reached an torque converter clutch is not en- WARNING! adequate temperature. gaged, it may seem as if the trans- Rapid acceleration on slippery sur- mission is not shifting into Over- • The vehicle speed is sufficiently faces is dangerous.

  • Page 249: Driving Through Water

    FLOWING/RISING WATER 3. Replace the tires when tread wear CAUTION! indicators first become visible. • Always check the depth of the 4. Keep the tires properly inflated. WARNING! standing water before driving through it. Never drive through 5. Maintain sufficient distance be- Do not drive on or across a road or standing water that is deeper tween your vehicle and the vehicle in...

  • Page 250: Power Steering

    in tight spaces. The system will pro- CAUTION! WARNING! (Continued) vide mechanical steering capability if • Driving through standing water • Driving through standing water power assist is lost. limits your vehicle’s traction ca- may cause damage to your vehi- If for some reason the power assist is pabilities.

  • Page 251: Power Steering Fluid Check

    PARKING BRAKE WARNING! CAUTION! Before leaving the vehicle, make sure Continued operation with reduced Do not use chemical flushes in your that the parking brake is fully applied power steering assist could pose a power steering system as the and place the shift lever in the PARK safety risk to yourself and others.

  • Page 252: Anti-Lock Brake System (Abs)

    NOTE: WARNING! WARNING! (Continued) • When the parking brake is ap- • Never use the PARK position as a • Do not leave the key fob in or near plied and the automatic trans- substitute for the parking brake. the vehicle (or in a location acces- mission is placed in gear, the Always apply the parking brake sible to children), and do not...

  • Page 253: Anti-Lock Brake Warning Light

    modulate hydraulic pressure to pre- WARNING! WARNING! (Continued) vent wheel lock-up and help avoid • The Anti-Lock Brake System • The capabilities of an ABS- skidding on slippery surfaces. contains sophisticated electronic equipped vehicle must never be ABS is activated during braking un- equipment that may be suscep- exploited in a reckless or danger- der certain road or stopping condi-...

  • Page 254: Electronic Brake Control System

    the ignition switch is turned to the ON required. Consult with your autho- spin is detected, brake pressure is ap- position and may stay on for as long rized dealer service center as soon as plied to the slipping wheel(s) and en- as four seconds.

  • Page 255: Brake Assist System (Bas) (For Versions/Markets, Where Provided)

    ELECTRONIC STABILITY The BAS complements the ABS. Ap- WARNING! plying the brakes very quickly results CONTROL (ESC) • The TCS cannot prevent the in the best BAS assistance. To receive natural laws of physics from act- The Electronic Stability Control the benefit of the system, you must ing on the vehicle, nor can it in- (ESC) enhances directional control...
  • Page 256 • Understeer - when the vehicle is ESC Operating Modes vehicle is in deep snow, sand or gravel conditions and more wheel spin than turning less than appropriate for ESC would normally allow is required the steering wheel position. The “ESC Off” switch is lo- to gain traction.

  • Page 257: Trailer Sway Control (Tsc)

    TRAILER SWAY CONTROL ESC Activation/Malfunction If the “ESC Activation/Malfunction In- Indicator Light And ESC OFF dicator Light” begins to flash during (TSC) Indicator Light acceleration, ease up on the accelerator TSC uses sensors in the vehicle to and apply as little throttle as possible. recognize an excessively swaying Be sure to adapt your speed and driving “ESC...

  • Page 258: Hill Start Assist (Hsa)

    TIRE SAFETY NOTE: WARNING! INFORMATION • P (Passenger) - Metric tire sizing If TSC activates while driving, slow is based on U.S. design standards. the vehicle down, stop at the near- Tire Markings P-Metric tires have the letter “P” est safe location, and adjust the molded into the sidewall preced- trailer load to eliminate trailer ing the size designation.
  • Page 259 • Temporary spare tires are de- • High flotation tire sizing is signed for temporary emergency based on U.S. design standards use only. Temporary high pres- and it begins with the tire diam- sure compact spare tires have eter molded into the sidewall. the letter “T”...
  • Page 260 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...

  • Page 261: Tire Identification Number (Tin)

    Tire Identification Number code may only be on one side. Tires of black sidewall tires as mounted on with white sidewalls will have the full the vehicle. If the TIN is not found on (TIN) TIN, including the date code, located the outboard side, then you will find it The TIN may be found on one or both on the white sidewall side of the tire.

  • Page 262: Tire Terminology And Definitions

    Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
  • Page 263 and Loading Information placard. (68 kg) = 750 lbs (340 kg), and 3) Tire size designed for your vehicle. The combined weight of occupants, 1400 lbs (635 kg) – 750 lbs (340 kg) = 4) Cold tire inflation pressures for cargo/luggage and trailer tongue 650 lbs [295 kg]).

  • Page 264: Tires - General Information

    TIRES — GENERAL Safety INFORMATION WARNING! WARNING! Overloading of your tires is danger- Tire Pressure ous. Overloading can cause tire • Improperly inflated tires are dan- Proper tire inflation pressure is essen- failure, affect vehicle handling, and gerous and can cause collisions. tial to the safe and satisfactory opera- increase your stopping distance.

  • Page 265: Tire Inflation Pressures

    increases tire rolling resistance result- At least once a month: WARNING! (Continued) ing in higher fuel consumption. • Check and adjust tire pressure with • Over-inflation reduces a tire's Ride Comfort And Vehicle a good quality pocket-type pressure ability to cushion shock. Objects Stability gauge.

  • Page 266: Tire Pressures For High Speed Operation

    Tire Pressures For High Radial Ply Tires exceed the maximum inflation pres- sure molded into the tire sidewall. Speed Operation Check tire pressures more often if WARNING! The manufacturer advocates driving subject to a wide range of outdoor at safe speeds and within posted speed Combining radial ply tires with temperatures, as tire pressures vary limits.

  • Page 267: Tire Types

    Damaged Run Flat tires, or Run Flat summer tires, be aware these tires are speeds over 120 km/h. For speeds tires that have experienced a loss of not designed for winter or cold driving above 120 km/h refer to original pressure should be replaced immedi- conditions.

  • Page 268: Spare Tires (For Versions/Markets, Where Provided)

    It is not recommended driving a ve- Spare Tire Matching Original Since this tire has limited tread life, hicle loaded at full capacity or to tow Equipped Tire And Wheel (for the original equipment tire should be a trailer while a tire is in the run flat versions/markets, where repaired (or replaced) and reinstalled mode.

  • Page 269: Tire Spinning

    Tire Spinning Full Size Spare (for rear axle of your vehicle, but it is not. versions/markets, where Installation of this limited-use spare When stuck in mud, sand, snow, or ice provided) tire affects vehicle handling. Since it is conditions, do not spin your vehicle's not the same as your original equip- The full size spare is for temporary wheels above 48 km/h or for longer...

  • Page 270: Tread Wear Indicators

    Tread Wear Indicators Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as Tread wear indicators are in the origi- The service life of a tire is dependent possible. Protect tires from contact nal equipment tires to help you in upon varying factors including, but with oil, grease, and gasoline.

  • Page 271: Tire Chains (Traction Devices)

    It is recommended to replace the two WARNING! WARNING! (Continued) front tires or two rear tires as a pair. • Do not use a tire, wheel size or • Failure to equip your vehicle with Replacing just one tire can seriously rating other than that specified for tires having adequate speed capa- affect your vehicle’s handling.

  • Page 272: Tire Rotation Recommendations

    with a maximum projection of and braking functions. For these rea- CAUTION! (Continued) 6 mm beyond the tire profile. sons, they wear at unequal rates. • Install device as tightly as pos- These effects can be reduced by sible and then retighten after WARNING! timely rotation of tires.
  • Page 273 should always be set based on cold in order for the “Tire Pressure Moni- CAUTION! inflation tire pressure. This is defined toring Telltale Light” to be turned off. • The TPMS has been optimized as the tire pressure after a vehicle has The system will automatically update for the original equipment tires not been driven for more than three...

  • Page 274: Base System

    NOTE: • Seasonal temperature changes Tire Pressure Monitoring Low will affect tire pressure, and the Tire Pressure Warnings • The TPMS is not intended to re- TPMS will monitor the actual place normal tire care and tire pressure in the tire. maintenance, provide The “Tire Pressure Moni-...
  • Page 275 NOTE: The vehicle may need to 5. Using wheels/tires not equipped 5. Once you repair or replace the be driven for up to 20 minutes with TPMS sensors. original road tire and reinstall it on above 24 km/h to receive this in- the vehicle in place of the compact Vehicles With Compact Spare formation.

  • Page 276: Premium System (For Versions/Markets, Where Provided)

    next ignition switch cycle, the TPMS The Premium TPMS consists of the will no longer chime or turn on the following components: “Tire Pressure Monitoring Telltale • Receiver Module Light.” To reactivate the TPMS, first, replace all four wheel and tire assem- •...
  • Page 277 SERVICE TPM SYSTEM Message SYSTEM” message will not be pres- still shown. This indicates that the ent, and a pressure value will be dis- pressure values are still being received The “Tire Pressure Monitoring Tell- played instead of dashes. A system from the TPM sensors but they may tale Light”...

  • Page 278: Fuel Requirements - Gasoline Engine

    will flash on and off for 75 seconds pressure is below the low pressure and the graphic will display “- -“ in and then remain on solid. In addition, warning limit in any of the four active place of four tire pressure values. the EVIC will display a “SERVICE road tires.

  • Page 279: Methanol

    METHANOL when using high quality unleaded supplier may reduce the risk of ex- gasoline with a minimum research oc- ceeding this 10% limit and/or of re- (Methyl or Wood Alcohol) is used in a tane rating (RON) of 91. ceiving fuel with abnormal properties. variety concentrations when...

  • Page 280: Clean Air Gasoline

    CLEAN AIR GASOLINE you should ask your gasoline retailer WARNING! whether or not his/her gasoline con- Many gasolines being Carbon monoxide (CO) in exhaust tains MMT. blended that contribute to cleaner air, gases is deadly. Follow the precau- MATERIALS ADDED TO especially in those areas where air tions below to prevent carbon mon- pollution levels are high.

  • Page 281: Fuel Requirements - Diesel Engine

    ADDING FUEL WARNING! CAUTION! (Continued) LOCKING FUEL FILLER • Damage to the fuel system or • Keep the liftgate closed when emissions control system could driving your vehicle to prevent CAP (GAS CAP) (for result from using an improper carbon monoxide and other poi- versions/markets, where fuel tank filler tube cap (gas cap).

  • Page 282: Trailer Towing

    carefully review this information to temporary) loaded in or on the trailer WARNING! (Continued) in its "loaded and ready for opera- tow your load as efficiently and safely • A fire may result if gasoline is tion" condition. The recommended as possible.

  • Page 283: Breakaway Cable Attachment

    With Attachment Point WARNING! WARNING! 1. For detachable tow bar pass the It is important that you do not ex- An improperly adjusted hitch sys- cable through the attachment point ceed the maximum front or rear tem may reduce handling, stability and clip it back onto itself.
  • Page 284 Without Attachment Points Trailer Towing Weights Trailer And Tongue Weight (Maximum Trailer Weight Loads balanced over the wheels or 1. For detachable ball tow bar you Ratings) heavier in the rear can cause the must follow the recommended manu- The following chart provides the trailer to sway severely side to side facturer or supplier procedure.
  • Page 285 total load on your vehicle. Refer to WARNING! WARNING! (Continued) the Tire and Loading Information Improper towing can lead to an in- • Safety chains must always be placard, located on the drivers jury accident. Follow these guide- used between your vehicle and door pillar, for the maximum com- lines to make your trailer towing as trailer.
  • Page 286 Towing Requirements – Tires Towing Requirements – Trailer WARNING! Brakes • Do not attempt to tow a trailer • Do not connect trailer brakes to while using a compact spare tire. – Do not interconnect the hydraulic your vehicle's hydraulic brake brake system or vacuum system of lines.
  • Page 287 The electrical connections are all Seven - Pin Connector Details Thirteen - Pin Connector complete to the vehicle but you must Details Wire Function mate the harness to a trailer connec- Color Function Wire tor. Color Stop Lights Left Turn Signal Yellow Left Rear Position, Black...

  • Page 288: Towing Tips

    TOWING TIPS Electronic Range Select (ERS) Thirteen - Pin Connector Details • When using the ERS shift control, Before setting out on a trip, practice Function Wire select the highest gear range that turning, stopping and backing the Color allows for adequate performance trailer in an area away from heavy and avoids frequent downshifts.
  • Page 289 • Use speed control in flat terrain and Trailer Hitch Attaching Points with light loads to maximize fuel Your vehicle will require extra equip- efficiency. ment to tow a trailer safely and effi- ciently. The trailer tow hitch must be Cooling System attached to your vehicle using the To reduce potential for engine and...
  • Page 290 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE Towing Condition Wheels OFF the Ground All Models Flat Tow NONE NOT ALLOWED Front Dolly Tow Rear NOT ALLOWED On Trailer RECREATIONAL TOWING – 3. Firmly apply the parking brake. CAUTION! Place the transmission in PARK.

  • Page 291: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES • HAZARD WARNING FLASHERS ... . .286 • IF YOUR ENGINE OVERHEATS ....286 •...

  • Page 292: Hazard Warning Flashers

    HAZARD WARNING IF YOUR ENGINE CAUTION! FLASHERS OVERHEATS Driving with a hot cooling system could damage your vehicle. If tem- The Hazard Warning flasher switch is In any of the following situations, you perature gauge reads “H”, pull over located in the lower center area of the can reduce the potential for overheat- and stop the vehicle.

  • Page 293: Wheel And Tire Torque Specifications

    135 N·m 19 mm 1.25 or changing the wheel. **Use only LANCIA recommended Torque Patterns (Continued) lug nuts/bolts and clean or remove After 40 km check the lug nut/bolt any dirt or oil before tightening.

  • Page 294: Jack Location

    TO ACCESS SPARE TIRE WARNING! (Continued) WINCH DRIVE NUT • Being under a jacked-up vehicle To access the spare tire winch drive is dangerous. The vehicle could nut and lower the spare tire, you will slip off the jack and fall on you. need to refer to one of the following You could be crushed.

  • Page 295: Spare Tire Tools

    SPARE TIRE TOOLS 2. Open the front drawer to expose the storage compartment. The tool pouch contains three pieces 3. Remove the liner from the con- and can be assembled into a spare tire sole's storage compartment to access hook; to remove the compact spare the spare tire winch drive nut.

  • Page 296: Preparations For Jacking

    2. Rotate the nut to the left until the NOTE: If either front tire is flat it WARNING! winch mechanism stops turning may be necessary to jack up the Do not attempt to change a tire on freely. This will allow enough slack in vehicle to remove the compact the side of the vehicle close to mov- the cable to allow you to pull the spare...

  • Page 297: Jacking Instructions

    JACKING INSTRUCTIONS General Information” for informa- WARNING! (Continued) tion about the spare tire, its use, • Only use the jack in the positions and operation. WARNING! indicated and for lifting this ve- 1. Loosen (but do not remove) the hicle during a tire change. Carefully follow these tire changing wheel lug nuts by turning them to the •...
  • Page 298 Rear jack locations are between a pair NOTE: In some situations the 4. Raise the vehicle by turning the of down-facing tabs on the sill flange jack may need to be placed on its jack screw to the right, using the of the vehicle side body.
  • Page 299 7. Lower the vehicle by turning the 10. Place the deflated (flat) tire and CAUTION! jack screw to the left. compact spare tire cover assembly in Be sure to mount the spare tire with the rear cargo area. Do not stow the 8.

  • Page 300: Securing The Spare Tire

    SECURING THE SPARE CAUTION! WARNING! TIRE The winch mechanism is designed Verify that both retainer tabs of the for use with the winch T-handle wheel spacer have been properly 1. Assemble the winch handle exten- only. Use of an air wrench or other extended through the center of the sions to form a T-handle and fit the power tools is not recommended...

  • Page 301: Road Tire Installation

    CAUTION! WARNING! The winch mechanism is designed To avoid the risk of forcing the ve- specifically to stow a compact spare hicle off the jack, do not tighten the tire only. Do not attempt to use the wheel nuts fully until the vehicle winch to stow the full size flat tire, has been lowered.

  • Page 302: Jump-Starting

    NOTE: When using a portable WARNING! battery booster pack follow the To avoid the risk of forcing the ve- manufacturer’s operating instruc- hicle off the jack, do not tighten the tions and precautions. wheel nuts fully until the vehicle has been lowered. Failure to follow CAUTION! this warning may result in personal injury.

  • Page 303: Jump-Starting Procedure

    1. Set the parking brake, shift the CAUTION! WARNING! automatic transmission into PARK Failure to follow these procedures Do not connect the jumper cable to and turn the ignition to LOCK. could result in damage to the the negative (-) post of the dis- 2.

  • Page 304: Freeing A Stuck Vehicle

    9. Disconnect the positive (+) end of REVERSE while gently pressing the CAUTION! the jumper cable from the positive (+) accelerator. Use the least amount of • When “rocking” a stuck vehicle post of the discharged vehicle. accelerator pedal pressure that will by shifting between DRIVE and maintain the rocking motion, without If frequent jump-starting is required...

  • Page 305: Towing A Disabled Vehicle

    TOWING A DISABLED VEHICLE NOTE: This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL • 40 km/h max speed Rear •...

  • Page 306: Shift Lever Override

    vehicle may be flat towed (with all CAUTION! CAUTION! (Continued) four wheels on the ground) under the Towing this vehicle in violation of • Do not push or tow this vehicle following conditions: the above requirements can cause with another vehicle as damage to •...
  • Page 307 3. Using a small screwdriver or simi- lar tool, remove the shift lever over- ride access cover (located near the top right of the shift lever in the instru- ment panel). 4. Press and maintain firm pressure on the brake pedal. 5.

  • Page 309: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE • ENGINE COMPARTMENT — 3.6L ... .305 • ENGINE COMPARTMENT — 2.8L DIESEL ..306 • ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .307 •...
  • Page 310 • FUSES ....... . .324 • TOTALLY INTEGRATED POWER MODULE . .325 •...

  • Page 311: Engine Compartment - 3.6L

    ENGINE COMPARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 — Coolant Pressure Cap 5 —...

  • Page 312: Engine Compartment - 2.8L Diesel

    ENGINE COMPARTMENT — 2.8L DIESEL 1 — Air Cleaner Filter 5 — Totally Integrated Power Module (Fuses) 2 — Engine Oil Fill 6 — Engine Coolant Reservoir 3 — Brake Master Cylinder 7 — Engine Oil Dipstick 4 — Battery 8 —...

  • Page 313: Onboard Diagnostic System - Obd Ii

    ONBOARD DIAGNOSTIC MAINTENANCE CAUTION! SYSTEM — OBD II PROCEDURES • Prolonged driving with the MIL on could cause further damage to Your vehicle is equipped with a so- The pages that follow contain the re- the emission control system. It phisticated Onboard Diagnostic sys- quired maintenance services deter- could also affect fuel economy...

  • Page 314: Engine Oil

    CAUTION! (Continued) Checking Oil Level Car maintenance should be done at • Car maintenance should be done a LANCIA Dealership. For routine at a LANCIA Dealership. For To assure proper engine lubrication, and minor maintenance operations routine and minor maintenance...

  • Page 315: Engine Oil Filter

    Engine oil is an engi- formation. vice. LANCIA engine oil filters are a neered product and its performance high quality oil filter and are recom- may be impaired by supplemental ad-...

  • Page 316: Intervention Regeneration Strategy - 2.8L Diesel Engine

    The best protection against carbon LANCIA engine air cleaner filters are son you. To avoid breathing CO, monoxide entry into the vehicle body a high quality filter and are recom- refer to “Safety Tips/Exhaust Gas”...

  • Page 317: Maintenance-Free Battery

    MAINTENANCE-FREE unusual situations involving CAUTION! grossly malfunctioning engine opera- BATTERY Damage to the catalytic converter tion, a scorching odor may indicate can result if your vehicle is not kept The top of the maintenance-free bat- severe and abnormal catalyst over- in proper operating condition.

  • Page 318: Air Conditioner Maintenance

    AIR CONDITIONER WARNING! WARNING! (Continued) MAINTENANCE • Use only refrigerants and com- • Battery posts, terminals, and re- For best possible performance, your pressor lubricants approved by lated accessories contain lead and air conditioner should be checked and the manufacturer for your air lead compounds.

  • Page 319: Body Lubrication

    Failure to downward. Car maintenance should be done at properly install the filter will result a LANCIA Dealership. For routine in the need to replace it more often. 4. Disengage the two retaining tabs and minor maintenance operations that secure the filter cover to the 7.

  • Page 320: Windshield Wiper Blades

    Car maintenance should be done at voir, apply some washer fluid to a Avoid using the wiper blades to re- a LANCIA Dealership. For routine cloth or towel and wipe the wiper move frost or ice from the windshield. and minor maintenance operations blades clean.

  • Page 321: Cooling System

    Liters of fluid when the Low Washer Car maintenance should be done at • You or others can be badly Fluid Light illuminates. a LANCIA Dealership. For routine burned by hot engine coolant and minor maintenance operations (antifreeze) or steam from your...
  • Page 322 applicable). If the engine coolant (an- Cooling System – Drain, Flush, CAUTION! tifreeze) is dirty, the system should be And Refill • Mixing of engine coolant (anti- drained, flushed, and refilled with If the engine coolant (antifreeze) is freeze) other than specified en- fresh OAT coolant (conforming to dirty or contains a considerable gine coolant (antifreeze), may re-...
  • Page 323 Adding Coolant life of the engine coolant (anti- WARNING! (Continued) freeze) and will require more fre- Your vehicle has been built with an • Do not use a pressure cap other quent coolant changes. improved engine coolant (antifreeze) than the one specified for your that allows extended maintenance in- Cooling System Pressure Cap vehicle.

  • Page 324: Brakes

    coolant (antifreeze) in the coolant re- when the thermostat opens, allow- proper corrosion protection of your covery bottle should be between the ing hot engine coolant (antifreeze) engine, which contains aluminum ranges indicated on the bottle. to enter the radiator. components.
  • Page 325 Car maintenance should be done at • To avoid contamination from for- brake fluid reservoir. With disc a LANCIA Dealership. For routine eign matter or moisture, use only brakes, fluid level can be expected to and minor maintenance operations new brake fluid or fluid that has fall as the brake pads wear.

  • Page 326: Automatic Transmission

    recommended fluid. No chemical diagnosing fluid leaks. Avoid using WARNING! (Continued) flushes should be used in any trans- transmission sealers as they may ad- • Overfilling the brake fluid reser- mission; only the approved lubricant versely affect seals. voir can result in spilling brake should be used.

  • Page 327: Appearance Care And Protection From Corrosion

    Car maintenance should be done at damage. paint, metal trim, and underbody a LANCIA Dealership. For routine protection. and minor maintenance operations CAUTION! The following maintenance recom- you wish to carry out yourself, we...
  • Page 328 using a mild car wash soap, and • If you detect any stone chips or should be cleaned regularly with a rinse the panels completely with scratches in the paint, touch them mild soap and water to prevent corro- clear water. up immediately.
  • Page 329 • For tough stains, apply a mild soap dirt can act as an abrasive and dam- Plastic is not as scratch resistant as solution to a clean, damp cloth and age the leather upholstery and should glass and therefore different lens remove the stain.

  • Page 330: Cleaning The Instrument Panel Cupholders

    When cleaning the rear view mirror, not remove the belts from the car to excess water from the liner and dry spray cleaner on the towel or rag that wash them. Dry with a soft cloth. the outer surfaces with a clean soft you are using.

  • Page 331: Totally Integrated Power Module

    component may be printed or em- WARNING! CAUTION! (Continued) (Continued) bossed on the inside of the cover. • Before replacing a fuse, make • When replacing a blown fuse, it is sure that the ignition is off and important to use only a fuse hav- that all the other services are ing the correct amperage rating.
  • Page 332 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink — Rear Door Module (RR Door Node) 25 Amp Natural — Driver Door Node 25 Amp Natural — Passenger Door Node 40 Amp Green — Antilock Brakes Pump/Stability Control Sys- 30 Amp Pink —...
  • Page 333 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description 25 Amp Natural — Sunroof Module — 15 Amp Blue Rear Center Brake Lamp/Brake Switch — 20 Amp Yellow Trailer Lighting/Fog Lamps — 20 Amp Yellow Front/Rear Axle Locker/Vacuum Pump Motor — 10 Amp Red Trailer Tow —...
  • Page 334 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description — 20 Amp Yellow Rear View Mirror, Instrument Cluster, Multi- Function Control Switch, Tire Pressure Moni- tor, Glow Plug Module – Export Diesel Only, Assy-Shifter (Hall Effect), Acoustic Noise Cancellation — 10 Amp Red Airbag Module/Occupant Classification Mod- —...
  • Page 335 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Occupant Classification Module — 15 Amp Blue Rear Wiper Module, Power Folding Mirror, J1962 Diagnostic Feed — 20 Amp Yellow Back-Up Lamps — 10 Amp Red Airbag Module, TT EUROPE —...

  • Page 336: Vehicle Storage

    Front Door Courtesy Lamp . . 578 Front Position Lamp ..W5W VEHICLE STORAGE Front Fog Lamp ..H11 Front Header Reading Lamps If you are leaving your vehicle dor- (for versions/markets, where Side Repeater Lamps .

  • Page 337: High Intensity Discharge Headlamps (Hid) (For Versions/Markets, Where Provided)

    Where possible, it is advisable to A transient high voltage occurs at 4. Install the new headlamp bulb and have bulbs changed at a LANCIA the bulb sockets of High Intensity twist until locked into the headlamp Dealership. Proper operation and Discharge (HID) headlamps when housing.

  • Page 338: Side Repeater Lamps

    SIDE REPEATER LAMPS 8. Push side repeater lamp to com- 5. Install the bulb and connector as- press metal spring clip and seat re- sembly into the fog lamp housing. The side repeater lamps are located in taining tab into fender. 6.

  • Page 339: Center High-Mounted Stop Lamp

    CENTER HIGH-MOUNTED • The PRY location is best closest 1. Remove the two lens assembly to the studs while dislodging mounting screws. STOP LAMP (CHMSL) them separately. 2. Remove the bulb from the socket. The CHMSL uses LED lights are not 3.

  • Page 340: Fluids, Lubricants And Genuine Parts

    FLUIDS, LUBRICANTS AND GENUINE PARTS ENGINE Component Fluids and Lubricants Specs (Genuine Parts) Red protective agent with antifreeze action, based on inhibited monoethyl gly- col with organic formula. Exceeds CUNA NC 956-16, ASTM D 3306 specifica- Engine Coolant* tions, FIAT Classification 9.55523 (PARAFLU UP Contractual Technical Ref- erence N°...

  • Page 341: Chassis

    CHASSIS Component Fluids and Lubricants Specs (Genuine Parts) Automatic Transmission Totally synthetic lubricant that meets FIAT Classification 9.55550-AV4 (TUTELA TRANSMISSION FORCE4, Con- tractual Technical Reference N° F108.F11) Brake/Clutch Master Cylinder Synthetic fluid that meets FIAT Classification 9.55597, FMVSS n° 116, DOT 4, ISO 4925, SAE J-1704 (TUTELA TOP 4, Contractual Technical Reference N°...

  • Page 342: Arrangements For Dealing With The Vehicle At The End Of Its Life

    1st January 2007, only vehicles regis- these collection and scrapping centres DEALING WITH THE tered after 1st July 2002 were col- either from a LANCIA or LANCIA VEHICLE AT THE END OF lected free of charge, while since 2007 Commercial Vehicle Dealership or by...

  • Page 345: Maintenance Schedules

    MAINTENANCE SCHEDULES • MAINTENANCE SCHEDULE ....340 • MAINTENANCE SCHEDULE – GASOLINE ENGINE .....340 •...
  • Page 346 MAINTENANCE The oil change indicator system will • Under no circumstances should remind you that it is time to take your change intervals exceed SCHEDULE vehicle in for scheduled maintenance. 12,000 km or 12 months, which- MAINTENANCE ever comes first. On Electronic Vehicle Information SCHEDULE –...
  • Page 347 Thousands Of Kilometers Months Check operation of lighting system (headlamps, direction indi- cators, hazard warning lights, luggage compartment, passen- • • • • • • • • ger compartment, glove compartment, instrument panel warn- ing lights, etc.). Check operation of windshield washer system and adjust jets if •...
  • Page 348 Thousands Of Kilometers Months Change brake fluid (or every 24 months). • • Replace pollen filter. • • • • • • • • (*) Change the automatic transmis- • power steering fluid; • short, repeated journeys (less than sion fluid and filter(s) at 96 km or 48 7-8 km) at sub-zero outside •...
  • Page 349 LANCIA parts, and specially designed A “CHANgE OIL” message will flash in the instrument cluster odometer...
  • Page 350 Thousands Of Kilometers Months Change engine oil and replace oil filter. (**) Rotate Tires. • • • • • • • • • • Check battery charge status and possibly re- • • • • • • • • • •...
  • Page 351 Thousands Of Kilometers Months Check and, if necessary, top up fluid levels (brakes, windshield washer, battery, engine cool- • • • • • • • • • • ant, etc.). Visually inspect the condition of accessory drive • • • belt/s.
  • Page 352 Periodic Checks Heavy-Duty Use Of The Car • visually inspect conditions of: en- gine, transmission, pipes and hoses Every 1,000 km or before long jour- If the car is used mainly under one of (exhaust - fuel system - brakes) and neys, check and, if necessary, restore: the following conditions: rubber elements (boots - sleeves -...

  • Page 353: Index

    INDEX...
  • Page 354 Adding Engine Coolant Ashtray ....150, 153 Body Mechanism Lubrication ..313 ....317 (Antifreeze) Assist, Hill Start .
  • Page 355 Cellular Phone ...89, 218 Conserving Fuel ... . .184 Disabled Vehicle Towing ..299 Center High Mounted Stop Disposal Console .
  • Page 356 Compartment ... .305 Filler Location Fuel ..176 Additives ....274 Filters Compartment Identification .
  • Page 357 Gear Ranges ....238 Ignition ....14 Key, Replacement ... . .16 Gear Select Lever Override .
  • Page 358 Mode Headlight Switch ..129 Locks .....22 ....184 Fuel Saver High Beam Indicator .
  • Page 359 Oil Filter, Change ... .309 Steering ... .244, 245 Repeater Lights, Side ..332 Onboard Diagnostic System .
  • Page 360 Rear Seat ....36 Sound Systems (Radio) ..193 Sunglasses Storage ...145 Supplemental Restraint System - Seats .
  • Page 361 Load Capacity ..256, 257 Trailer and Tongue Weight . . .278 Vehicle Modifications/Alterations . . .7 Pressure Monitor System Wiring ....280 Vehicle Storage .
  • Page 362 Notes Fiat Group Automobiles S.p.A. - Parts & Services - Technical Services - Service Engineering Largo Senatore G. Agnelli, 3 - 10040 Volvera - Torino (Italia) Print n. 530.02.324 - 09/2013 - Edition 1...
  • Page 364 ENGLISH The data contained in this publication is intended merely as a guide. Lancia reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your Lancia...

Table of Contents

Save PDF