Rear Window Washer/Wiper - Lancia Lybra Owner's Handbook Manual

REAR WINDOW WASHER/WIPER

OPERATION (fig. 1)
This device only works with the ig-
nition key at MAR:
To operate the rear window wiper,
turn the ring A to '. The rear win-
dow wiper will flick.
Push stalk B forward to operate the
rear window washer. It will be switched
off when the stalk is released.
The wiper will be operated auto-
matically for a few flicks when the
rear window washer is operated.
fig. 1
The rear window wiper will be au-
tomatically operated for some seconds
when the windscreen wiper is work-
ing and reverse gear is engaged.
REPLACING THE BLADES
(fig. 2)
Replace the entire rear window wi-
per blade and arm assembly.
1) Lift the cover A and remove the
arm by loosening the nut B fastening
it to the pin.
2) Position the new arm correctly
and fasten the nut.
3) Lower the cover.
fig. 2
SPRAY NOZZLES (fig. 3)
If there is no jet of liquid, first make
sure that there is liquid in the reser-
voir (see "Car maintenance").
The rear window washer jets can be
directed by adjusting the inclination
of the nozzles A.
fig. 3
235