Lancia Voyager 2013 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. Lancia Manuals
  4. Automobile
  5. Voyager 2013
  6. Owner's handbook manual

Lancia Voyager 2013 Owner's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Owner Handbook

Advertisement

Table of Contents
loading

Related Manuals for Lancia Voyager 2013

Summary of Contents for Lancia Voyager 2013

  • Page 1 Owner Handbook...
  • Page 2 Lancia Service authorised workshops you can find technicians who are trained by us, offering quality and professionalism for all your service requirements. Lancia workshops are always close to you for your servicing operations, repairs and seasonal checks and our experts will offer practical recommendations for keeping your car in the best possible condition.
  • Page 4 Always insist on a Genuine Part and check that it has been used. Dear Customer, Thank you for choosing LANCIA and congratulations on your choice of a LANCIA Voyager. We have written this handbook to help you get to know all your car and use it in the best possible way.
  • Page 5 • the Warranty Certificate with terms and conditions for maintaining its validity • the range of additional services available to LANCIA customers. Enjoy the read. Happy motoring! This Owner Handbook describes all versions of the LANCIA Voyager; please consider only the information rel- evant to your version, engine and configuration.

  • Page 7: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..............3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .

  • Page 9: Introduction

    INTRODUCTION • INTRODUCTION ......4 • IMPORTANT NOTICE......4 •...

  • Page 10: Introduction

    Congratulations on selecting your ALL MATERIAL CONTAINED IN in loss of control, collision with other new LANCIA vehicle. Be assured that THIS PUBLICATION IS BASED ON vehicles or objects, going off the road, it represents precision workmanship,...
  • Page 11 The manufacturer reserves the right In view of the many replacement parts Your warranties do not cover any part to make changes in design and speci- and accessories from various manu- that the manufacturer did not supply. fications, and/or to make additions to facturers available on the market, the Nor do they cover the cost of any manufacturer cannot be certain that...

  • Page 12: How To Use This Manual

    HOW TO USE THIS Since the specification of your vehicle The detailed index at the back of this depends on the items of equipment Owner's Manual contains a complete MANUAL ordered, certain descriptions and il- listing of all subjects. Consult the Table of Contents to de- lustrations may differ from your vehi- Consult the following table for a de- termine which section contains the in-...

  • Page 14: Warnings And Cautions

    WARNINGS AND VEHICLE VEHICLE CAUTIONS IDENTIFICATION MODIFICATIONS/ NUMBER ALTERATIONS This Owners Manual contains WARNINGS against operating proce- The Vehicle Identification Number WARNING! dures that could result in a collision or (VIN) is found on the left front corner Any modifications or alterations to bodily injury.

  • Page 15: Things To Know Before Starting Your Vehicle

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • A WORD ABOUT YOUR KEYS ....12 • WIRELESS IGNITION NODE (WIN) ..12 •...
  • Page 16 • TRANSMITTER BATTERY REPLACEMENT . . .20 • GENERAL INFORMATION ....20 • DOOR LOCKS ......21 •...
  • Page 17 • SUPPLEMENTAL ACTIVE HEAD RESTRAINTS (AHR)..... .40 • ACTIVE HOOD SYSTEM ....41 •...

  • Page 18: A Word About Your Keys

    A WORD ABOUT YOUR the START position, the switch auto- Key Fob matically returns to the ON/RUN po- KEYS The Key Fob operates the ignition sition. switch. Insert the square end of the Your vehicle is equipped with a key- Key Fob into the ignition switch lo- less ignition system.

  • Page 19: Steering Wheel Lock

    NOTE: The Key-In-Ignition re- WARNING! minder only sounds when the Key • Never leave children alone in a Fob is placed in the OFF or ACC vehicle. Leaving unattended chil- ignition position. dren in a vehicle is dangerous for a number of reasons. A child or If your vehicle is equipped with Key- others could be seriously or fa- less Enter-N-Go, opening the driver’s...

  • Page 20: To Manually Lock The Steering Wheel

    To Manually Lock The SENTRY KEY® (for Key Fob to start the engine. Either of these conditions will result in the en- Steering Wheel versions/markets, where gine being shut off after two seconds. provided) With the engine running, rotate the If the Vehicle Security Light turns on steering wheel one-half revolution to The Sentry Key®...

  • Page 21: Customer Key Programming

    Duplication of Key Fobs may be per- Operation is subject to the following all of the visual signals after an addi- formed at an authorized dealer. conditions: tional 31 seconds, then the Vehicle Security Alarm will rearm itself. • This device may not cause harmful NOTE: When having the Sentry interference.

  • Page 22: To Disarm The System

    exterior zone (refer to "Keyless Enter- • Cycle the vehicle ignition system • When Vehicle Security N-Go" in "Things To Know Before out of the OFF position. Alarm is armed, the interior Starting Your Vehicle" for further in- power door lock switches will •...

  • Page 23: Illuminated Entry

    USING THE KEYLESS ILLUMINATED ENTRY REMOTE KEYLESS ENTRY TRANSMITTER ENTRY (RKE) (for The courtesy lights will turn on when versions/markets, where you use the Remote Keyless Entry (RKE) transmitter to unlock the provided) doors or open any door. This system allows you to lock or un- This feature also turns on the ap- lock the doors and liftgate, open both proach lighting in the outside mirrors...
  • Page 24 Remote Key Unlock on First Press 3. Release both buttons at the same seconds and then open/close. If the time. button is pushed while the liftgate is This feature lets you program the sys- being power closed, the liftgate will tem to unlock either the driver's side, 4.

  • Page 25: Programming Additional

    pushed while the door is being power- Turn Off Flash Lights With RKE 3. Release both buttons at the same closed, the door will reverse to the full Lock (for versions/markets, time. open position. where provided) 4. Test the feature while outside of This feature will cause the turn signal If the vehicle is locked and the Vehicle the vehicle by pressing the LOCK/...
  • Page 26 If you do not have a programmed RKE transmitter, contact your autho- rized dealer for details. TRANSMITTER BATTERY REPLACEMENT The recommended replacement bat- tery is one CR2032 battery. Emergency Key Removal Separating RKE Transmitter NOTE: 2. Insert the tip of the emergency key 3.
  • Page 27 • This device must accept any inter- WARNING! ference received, including interfer- • For personal security and safety ence that may cause undesired op- in the event of a collision, lock the eration. vehicle doors as you drive as well If your RKE transmitter fails to oper- as when you park and leave the ate from a normal distance, check for...
  • Page 28 POWER DOOR LOCKS (for Unlock Doors Automatically On Exit (for versions/markets, where versions/markets, where provided) provided) The Unlock Doors Automatically On A power door lock switch is on each Exit feature unlocks all of the vehicle front door trim panel. Use this switch doors when any door is opened.
  • Page 29 KEYLESS ENTER-N- may time out. Pulling the deac- tivated front door handle will GO™ (for versions/ reactivate the door handle's markets, where provided) Passive Entry feature. The Passive Entry system is an en- • If wearing gloves on your hands, hancement to the vehicle’s Remote or if it has been raining on the Keyless Entry (RKE) system and a...
  • Page 30 NOTE: All doors will unlock Preventing Inadvertent Locking Of To Lock The Vehicle’s Doors when the front passenger door Passive Entry RKE Transmitter In The front door handles have LOCK handle is grabbed regardless of the Vehicle buttons located on the outside of the driver’s door unlock preference To minimize the possibility of unin- handles.
  • Page 31 POWER WINDOWS • The Passive Entry system will Power Window Lockout Switch not operate if the RKE transmit- (for versions/markets, where You can control either the front or rear ter battery is dead. provided) windows using switches located on The driver may lock out the rear The vehicle doors can also be locked the driver's door trim panel.
  • Page 32 Front Passenger Power Window Auto-Down Feature (for To stop the window from going all the Switch versions/markets, where way up during the Auto Up operation, provided) push down on the switch briefly. There is a single switch on the front passenger's door trim panel which op- The front window switches may be To close the window part way, lift the...
  • Page 33 WIND BUFFETING Sliding Side Door Power Window WARNING! Switch There is no anti-pinch protection Wind buffeting can be described as Second row passengers may open and when the window is almost closed. the perception of pressure on the ears close the sliding door window by a To avoid personal injury be sure to or a helicopter-type sound in the ears.
  • Page 34 POWER SLIDING SIDE To keep your door operating properly, panel, just in front of the power slid- observe the following guidelines: ing door for the rear seat passengers DOOR (for versions/ and in the overhead console for the markets, where provided) •...
  • Page 35 seats, press the power sliding door pressed. To close the door, wait alert other drivers in the area that master lock button, located in the until it is fully open and then passenger(s) could be entering or ex- overhead console, to disable the press the switch again.
  • Page 36 SLIDING SIDE DOOR pressing the OFF side of the Master located on the trim panel just in Lock Out Switch located in the front front of the power sliding door. CHILD PROTECTION overhead console. LOCK • The power sliding side door will When the power sliding door master operate from the switches lo- To provide a safer environment for...
  • Page 37 2. Slide the Child Protection Door overhead console or the switches 2. Slide the Child Protection Door Lock control inward (toward the ve- located on the trim panel just in Lock control outward (away from the hicle) to engage the Child Protection front of the power sliding door.
  • Page 38 LIFTGATE transmitter. Press the button on the transmitter twice within five seconds, On vehicles equipped with power to open the power liftgate. When the locks, the liftgate can be unlocked liftgate is fully open, pressing the but- using the Remote Keyless Entry ton twice within five seconds, a sec- (RKE) transmitter button, or by acti- ond time, will close the liftgate.
  • Page 39 NOTE: • If the liftgate release button is WARNING! activated while the power lift- • If anything obstructs the power • Driving with the liftgate open can gate is closing, the liftgate will liftgate while it is closing or allow poisonous exhaust gases reverse to the full open position.
  • Page 40 • Supplemental Side Air Bag Inflat- can be used to hold infant and child Someone on the road may be a poor able Curtains (SABIC) that span restraint systems. For more informa- driver and cause a collision that in- the front, second, and third row tion on ISOFIX, see ISOFIX —...
  • Page 41 as necessary to allow the belt to go WARNING! WARNING! (Continued) around your lap. • It is dangerous to ride in a cargo • Wearing your belt in the wrong area, inside or outside of a ve- place could make your injuries in hicle.
  • Page 42 WARNING! WARNING! (Continued) • A belt that is buckled into the • A shoulder belt placed behind wrong buckle will not protect you you will not protect you from in- properly. The lap portion could jury during a collision. You are ride too high on your body, possi- more likely to hit your head in a bly causing internal injuries.
  • Page 43 5. Position the shoulder belt on your Third Row Center Shoulder Belt Lap/Shoulder Belt Untwisting chest so that it is comfortable and not Instructions Procedure resting on your neck. The retractor The shoulder belt for the third row Use the following procedure to un- will withdraw any slack in the belt.
  • Page 44 Adjustable Upper Shoulder Belt As a guide, if you are shorter than which are used to secure a child re- Anchorage average you will prefer a lower posi- straint system. For additional infor- tion, and if you are taller than average mation, refer to “Installing Child Re- In the front seats and the second row you will prefer a higher position.
  • Page 45 AUTOMATIC LOCKING How To Disengage The Automatic event of a head-on collision. This Locking Mode safety belt system has a retractor as- RETRACTOR MODE (ALR) sembly that is designed to release Unbuckle combination lap/ In this mode, the shoulder belt is au- webbing in a controlled manner.

  • Page 46: Supplemental Active Head Restraints (Ahr)

    belt by assuring that the belt is tight How The Active Head Restraints about the occupant early in a colli- (AHR) Work sion. Pretensioners work for all size The Occupant Restraint Controller occupants, including those in child (ORC) determines whether the sever- restraints.

  • Page 47: Active Hood System

    “Understanding The Features Of 3. Pull down then rearward to- Your Vehicle”. wards the rear of the vehicle then down to engage the locking mecha- Resetting Active Head Restraints nism. (AHR) If the Active Head Restraints are trig- gered in a collision, you must reset the head restraint on the driver’s and front passenger seat.
  • Page 48 In order to detect a range of pedestri- Service Active Hood System Following an Active Hood deploy- ans, other objects that are impacted ment, the hood position can be tem- If the EPPM has deployed the Active may result in an Active Hood deploy- porarily reset by pushing down at the Hood, or if it detects a malfunction in rear edge over the hood hinges as the...

  • Page 49: Enhanced Seat Belt Use Reminder System (Beltalert®)

    NOTE: After any Active Hood de- WARNING! WARNING! (Continued) (Continued) ployment, the vehicle should be • Modifications to any part of the • Drivers must be aware of pedes- taken to an authorized dealer im- Active Hood system could cause it trians.

  • Page 50: Seat Belts And Pregnant Women

    SUPPLEMENTAL The BeltAlert® warning sequence be- BeltAlert® can be enabled or disabled gins after the vehicle speed is over by your authorized dealer. LANCIA RESTRAINT SYSTEM (SRS) 8 km/h, by blinking the Seat Belt does not recommend deactivating — AIR BAGS Reminder Light and sounding an in- BeltAlert®.

  • Page 51: Air Bag System Components

    NOTE: The Driver and Front Pas- (SAB). Supplemental Seat- • Driver Advanced Front Air Bag senger Advanced Front Air Bags Mounted Side Air Bags are marked • Passenger Advanced Front Air Bag are certified to regulations for Ad- with an air bag label sewn into the •...
  • Page 52 front passenger. Side air bags also The driver and front passenger seats WARNING! work with seat belts to improve occu- should be moved back as far as prac- • No objects should be placed over pant protection. tical to allow the Advanced Front Air or near the air bag on the instru- Bags room to inflate.
  • Page 53 NOTE: WARNING! (Continued) • Should a vehicle rollover occur, • Being too close to the steering the pretensioners and/or SAB wheel or instrument panel during and SABIC air bags on both Advanced Front Air Bag deploy- sides of the vehicle may deploy. ment could cause serious injury, including death.

  • Page 54: Air Bag Deployment Sensors And Controls

    front passenger. Side air bags also Air Bags are not expected to reduce WARNING! work with seat belts to improve occu- the risk of injury in rear, side, or roll- • Your vehicle is equipped with left pant protection. over collisions. and right Supplemental Side Air Air Bag Deployment Sensors Bag Inflatable Curtain (SABIC),...
  • Page 55 needed to help keep you in position, It also includes diagnostics that will inflator units. A large quantity of non- away from an inflating air bag. illuminate the instrument cluster Air toxic gas is generated to inflate the Bag Warning Light if a malfunction is Advanced Front Air Bags.
  • Page 56 The ORC determines if a side collision these events, the ORC will deploy the Front And Side Impact Sensors requires the side air bags to inflate, SABIC only on the impact side of the In front and side impacts, impact sen- based on the severity and type of col- vehicle.
  • Page 57 an event, the ignition switch must be and normally heal quickly. How- WARNING! changed from IGN ON to IGN OFF. ever, if you haven't healed signifi- Deployed air bags and seat belt pre- cantly within a few days, or if you If A Deployment Occurs tensioners can not protect you in have any blistering, see your doctor...
  • Page 58 Maintaining Your Air Bag System Enhanced Accident Response WARNING! (Continued) System • Do not attempt to modify any WARNING! In the event of an impact causing air part of your air bag system. The • Modifications to any part of the bag deployment, if the communica- air bag may inflate accidentally air bag system could cause it to...
  • Page 59 Air Bag Warning Light • The Air Bag Warning Light comes assist in understanding how a vehi- on intermittently or remains on cle’s systems performed. The EDR is while driving. designed to record data related to ve- You will want to have the hicle dynamics and safety systems for air bags ready to inflate for NOTE: If the speedometer, ta-...

  • Page 60: Child Restraints

    CHILD RESTRAINTS NOTE: EDR data are recorded by WARNING! your vehicle only if a non-trivial • “Extreme Hazard! Do not use a Everyone in your vehicle needs to be crash situation occurs; no data are rearward-facing child restraint buckled up at all times, including ba- recorded by the EDR under nor- on a seat protected by an air bag bies and children.
  • Page 61 Mass Group Seating Position (or other site) Front Passenger Rear Outboard Rear Center Intermediate Intermediate Outboard Center Group 0 - Up to 10 kg Group 0+ - Up to 13 kg Group 1 - 9 to 18 kg Group II - 15 to 25 kg Group III - 22 to 36 kg...
  • Page 62 Vehicle ISOFIX Positions Chart Interme- Interme- Front diate Mass Size Rear Rear diate Other Fixture Passen- Center Group Class Outboard Center Outboard Sites LUX. SSnG Quad Carrycot ISO/L1 IUF* ISO/L2 IUF** IUF* 0 — up to ISO/R1 IUF** 10 kg 0+ —...
  • Page 63 Vehicle ISOFIX Positions Chart Interme- Interme- Front diate Mass Size Rear Rear diate Other Fixture Passen- Center Group Class Outboard Center Outboard Sites LUX. SSnG Quad II – 15 to 25 kg III – 22 to 36 kg Key of letters used in the table above: •...
  • Page 64 Infants And Small Children vehicle by the lap/shoulder belt or the the child seat. These child seats are ISOFIX child restraint anchor system. also held in the vehicle by the lap/ Safety experts recommend that chil- Refer to “ISOFIX — Child Seat An- shoulder belt or the ISOFIX child re- dren ride rearward-facing in the ve- chorage System”.
  • Page 65 • In the rear seat, you may have fying that it meets all applicable Never allow a child to put the trouble tightening the lap/shoulder Safety Standards. LANCIA also shoulder belt under an arm or be- belt on the child restraint because recommends that you make sure hind their back.
  • Page 66 turn the buckle around, and insert the center position on all third row inquisitive child. Remind all the latch plate into the buckle fold-in-floor seats. Second-row seats children in the vehicle that the again. If you still can't make the also feature tether strap anchorages, seat belts are not toys and located in the rear surface of the seat-...
  • Page 67 3. Attach the lower child restraint at- NOTE: The top tether strap is al- tachment straps to the vehicle’s lower ways to be secured, regardless of if anchor bars. Ensure that the lower the child restraint is installed with the lower anchors or the vehicle attachment strap is firmly engaged and that the hook is secure.
  • Page 68 seat belts not being used for occu- it is not necessary to use a locking clip. WARNING! pant restraints are stowed and out The ALR will make a ratcheting noise An incorrectly anchored tether of reach of children. It is recom- if you extract the entire belt from the strap could lead to increased head mended that before installing the...
  • Page 69 through the belt path of the child re- 2. Finally, pull on any excess web- To attach a child restraint tether straint. Slide the latch plate into the bing to tighten the lap portion around strap: buckle until you hear a “click.” Next, the child restraint.

  • Page 70: Engine Break-In Recommendations

    In general, you will first loosen the Transporting Pets The engine oil installed in the engine child seat adjusters on the lower at the factory is a high-quality energy Air Bags deploying in the front seat straps and tether straps so that you conserving type lubricant.

  • Page 71: Safety Tips

    Exhaust Gas SAFETY TIPS The best protection against carbon monoxide entry into the vehicle body Transporting Passengers is a properly maintained engine ex- WARNING! haust system. Exhaust gases can injure or kill. NEVER TRANSPORT PASSEN- They contain carbon monoxide GERS IN THE CARGO AREA. Whenever a change is noticed in the (CO), which is colorless and odor- sound of the exhaust system, when ex-...
  • Page 72 Front seat belt assemblies must be Floor Mat Safety Information WARNING! (Continued) replaced after a collision. Rear seat Always use floor mats designed to fit • Never put floor mats or other belt assemblies must be replaced after the footwell of your vehicle. Use only floor coverings on top of already a collision if they have been damaged floor mats that leave the pedal area...

  • Page 73: Periodic Safety Checks You Should Make Outside The Vehicle

    Periodic Safety Checks You Lights Fluid Leaks Should Make Outside The Have someone observe the operation Check area under vehicle after over- Vehicle of brake lights and exterior lights night parking for fuel, engine coolant, while you work the controls. Check oil, or other fluid leaks.

  • Page 75: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE • MIRRORS .......77 • INSIDE DAY/NIGHT MIRROR (for versions/markets, where provided) .
  • Page 76 • BLIND SPOT MONITORING (for versions/markets, where provided) ..80 • REAR CROSS PATH (for versions/markets, where provided) ..82 • MODES OF OPERATION ....83 •...
  • Page 77 • MANUAL RECLINING SEATS ... . .109 • HEAD RESTRAINTS ....110 •...
  • Page 78 • HEADLIGHT DELAY (for versions/markets, where provided) ..124 • FRONT AND REAR FOG LIGHTS (for versions/markets, where provided) ..125 • BATTERY PROTECTION ....125 •...
  • Page 79 • TO VARY THE SPEED SETTING ...132 • TO ACCELERATE FOR PASSING ...132 • PARKSENSE® REAR PARK ASSIST (for versions/markets, where provided) ..133 •...
  • Page 80 • REAR OVERHEAD CONSOLES (for versions/markets, where provided) ..141 • POWER SUNROOF (for versions/markets, where provided) ..141 • OPENING SUNROOF — EXPRESS ..142 •...
  • Page 81 • SMOKER'S PACKAGE KIT (for versions/markets, where provided) ..147 • STORAGE.......148 •...
  • Page 82 • ROOF LUGGAGE RACK (for versions/markets, where provided) ..155 • DEPLOYING THE CROSSBARS ... .156 • HEADLIGHT WASHER (for versions/markets, where provided) ..159 •...

  • Page 83: Mirrors

    AUTOMATIC DIMMING MIRRORS CAUTION! MIRROR (for versions/ To avoid damage to the mirror dur- INSIDE DAY/NIGHT markets, where provided) ing cleaning, never spray any MIRROR (for versions/ cleaning solution directly onto the This mirror automatically adjusts for markets, where provided) mirror.

  • Page 84: Driver's Automatic Dimming Mirror (For Versions/Markets, Where Provided)

    DRIVER'S AUTOMATIC POWER MIRRORS (for Using the mirror control switch, press on any of the four arrows for the di- DIMMING MIRROR (for versions/markets, where rection that you want the mirror to versions/markets, where provided) move. provided) The power mirror controls are located Driver's side power mirror preselected on the driver's door trim panel.

  • Page 85: Tilt Mirrors In Reverse (Available With Memory Seat Only), (For Versions/Markets, Where Provided)

    TILT MIRRORS IN Customer-Programmable Fea- If the mirrors are in the folded posi- tures” in “Understanding Your tion, and vehicle speed is equal or REVERSE (available with Instrument Panel” for further in- greater than 16 km/h, they will auto- memory seat only), (for formation.

  • Page 86: Blind Spot Monitoring (For Versions/Markets, Where Provided)

    BLIND SPOT is in any forward gear or REVERSE equipment) extends beyond the and enters stand-by mode when the side of your vehicle, this may re- MONITORING (for vehicle is in PARK. sult in the BSM warning light versions/markets, where remaining illuminated the en- The BSM detection zone covers ap- provided)
  • Page 87 The BSM system notifies the driver of Overtaking Traffic objects in the detection zones by illu- If you pass another vehicle slowly minating the BSM warning light lo- with a relative speed of less than cated in the outside mirrors in addi- 16 km/h and the vehicle remains in tion to sounding an audible (chime) the blind spot for approximately 1.5...

  • Page 88: Rear Cross Path

    The BSM system is designed not to WARNING! issue an alert on stationary objects The Blind Spot Monitoring system such as guardrails, posts, walls, foli- is only an aid to help detect objects age, berms, etc. However, occasion- in the blind spot zones. The BSM ally the system may alert on such ob- system is not designed to detect pe- jects.

  • Page 89: Modes Of Operation

    visual alert in the appropriate side • If the hazard flashers are on, the WARNING! view mirror based on a detected ob- system will request the appro- RCP is not a Back Up Aid system. It ject. However, when the system is op- priate visual alert only.

  • Page 90: Uconnect™ Phone

    display the message “ Blind spot sys- Uconnect™ Phone allows you to WARNING! tem unavailable-Astronomy zone”. transfer calls between the Uconnect™ Any voice commanded system The side mirrors LED’s will be lit up Phone and your mobile phone as you should be used only in safe driving enter or exit your vehicle and enables and stay lit until the vehicle exits the...

  • Page 91: Compatible Phones

    The Uconnect™ Phone can be used • Select type of the vehicle can also break the commands into with Hands-Free Profile certified parts and say each part of the com- • In the getting started tab, select Bluetooth® mobile phones. Some mand when you are asked for it.
  • Page 92 and follow the audible prompts for • After the “Ready” prompt and the your Uconnect™ System. The pri- directions. All Uconnect™ Phone ses- following beep, say “Setup Phone ority allows the Uconnect™ Phone sions begin with a press of the but- Pairing”.
  • Page 93 Call By Saying A Name Add Names To Your Uconnect™ After you are finished adding an entry Phonebook into the phonebook, you will be given • Press the button to begin. the opportunity to add more phone NOTE: Adding names numbers to the current entry or to •...
  • Page 94 Access Profile may support this fea- • Only the mobile phone’s phone- • Next, choose the number designa- ture. See Uconnect™ website for sup- book is downloaded. SIM card tion (home, work, mobile, or other) ported phones. phonebook is not part of the mobile that you wish to edit.

  • Page 95: Phone Call Features

    • After the “Ready” prompt and the Delete/Erase “All” Uconnect™ • The Uconnect™ Phone will play following beep, say “Phonebook Phonebook Entries the names of all the phonebook en- Delete”. tries, including the downloaded • Press the button to begin. phonebook entries, if available.
  • Page 96 Answer Or Reject An Incoming can only answer an incoming call the two calls have switched. Only one Call — No Call Currently In or ignore it. call can be placed on hold at one time. Progress Making A Second Call While Conference Call When you receive a call on your mo- Current Call In Progress...

  • Page 97: Uconnect™ Phone Features

    call on hold may not become active call ends, or until the vehicle bat- (English, Dutch, French, German, automatically. This is cell phone- tery condition dictates cessation of Italian, or Spanish, if so equipped). dependent. To bring the call back the call on the Uconnect™...
  • Page 98 Emergency Assistance (for • If supported, this number may NOTE: The Breakdown service versions/markets, where be programmable on some sys- number has to be setup before us- provided) tems. To do this, press the ing. To setup, press the button button and say “Setup”, fol- and say “Setup, Breakdown Ser- If you are in an emergency and the...
  • Page 99 service or automated customer ser- the name or number and say the name Turning Confirmation Prompts vice. Some services require immediate of the phonebook entry you wish to On/Off response selection. In some instances, send. The Uconnect™ Phone will Turning confirmation prompts off that may be too quick for use of the then send the corresponding phone will stop the system from confirming...

  • Page 100: Advanced Phone Connectivity

    Dialing Using The Mobile Phone the conversation coming from the Connect Or Disconnect Link Keypad other party, but the other party will Between The Uconnect™ Phone not be able to hear you. In order to And Mobile Phone You can dial a phone number with mute the Uconnect™...

  • Page 101: Things You Should Know About Your Uconnect™ Phone

    button and say “Select” or Delete Uconnect™ Phone Paired feature may be used. To enter this “Delete”. Also, see the next two sec- Mobile Phones training mode, follow one of the two tions for an alternate way to “se- following procedures: •...
  • Page 102 Reset • Make sure that no one other than • It is not recommended to store simi- you is speaking during a voice sounding names • Press the button. period. Uconnect™ Phonebook. • After the “Ready” prompt, and the • Performance is maximized under: •...
  • Page 103 Phone Far End Audio Send Messages: Performance Uconnect™ Phone can read or send send messages using new messages on your phone. • Audio quality is maximized under: Uconnect™ Phone. To send a new message: • low-to-medium blower setting, Read Messages: •...
  • Page 104 List of Preset Messages: 15. Where are we meeting? Bluetooth® Communication Link Mobile phones have been found to 1. Yes 16. Can this wait? lose connection to the Uconnect™ 2. No 17. Bye for now Phone. When this happens, the con- nection can generally be reestablished 3.
  • Page 108 Voice Commands Primary Alternate (s) Primary Alternate (s) Primary Alternate (s) continue mute zero delete mute off dial new entry download three Dutch Nederlands other other four edit pair a phone five emergency phone pairing pairing English phonebook phone book seven delete all erase all...

  • Page 109: Voice Command

    VOICE COMMAND (for NOTE: At any time, you can say WARNING! the words “Cancel”, “Help” or versions/markets, where Any voice commanded system “Main Menu”. provided) should be used only in safe driving These commands are universal and conditions following all applicable VOICE COMMAND SYSTEM can be used from any menu.
  • Page 110 Changing The Volume Radio Am (Or Radio Long Wave • “Previous Station” (to select the Or Radio Medium Wave) previous station) 1. Start a dialogue by pressing the To switch to the AM band, say “AM” Voice Command button. • “Menu Radio” (to switch to the ra- or “Radio AM”.

  • Page 111: Voice Training

    VOICE TRAINING button to stop recording. You • “Switch to system setup” proceed by saying one of the follow- • “Change to setup” For users experiencing difficulty with ing commands: the system recognizing their voice • “Main menu setup” or –...

  • Page 112: Power Seats

    WARNING! WARNING! (Continued) • It is dangerous to ride in a cargo • Do not ride with the seatback re- area, inside or outside of a ve- clined so that the shoulder belt is hicle. In a collision, people riding no longer resting against your in these areas are more likely to chest.

  • Page 113: Power Lumbar

    POWER LUMBAR (for Adjusting The Seat Up Or Down WARNING! versions/markets, where The height of the seats can be ad- • Adjusting a seat while driving provided) justed up or down. Pull upward or may be dangerous. Moving a seat push downward on the seat switch, while driving could result in loss Vehicles equipped with power driver...

  • Page 114: Heated Seats

    HEATED SEATS (for Front Heated Seats output will drop to the normal HIGH- level. If the HIGH-level setting is se- versions/markets, where There are two heated seat switches lected, the system will automatically provided) that allow the driver and passenger to switch to LOW-level after a maximum operate the seats independently.

  • Page 115: Manual Front/Second Row Seat Adjuster

    You can choose from HIGH, LOW or one, indicating the change. The LOW- WARNING! OFF heat settings. Amber indicator level setting will turn OFF automati- • Adjusting a seat while driving lights in each switch indicate the level cally after a maximum of 45 minutes. may be dangerous.

  • Page 116: Head Restraints

    To recline, lean forward slightly, lift When AHRs deploy during a rear im- WARNING! the lever, then push back to the de- pact, the front half of the head re- The head restraints for all occu- sired position and release the lever. straint extends forward to minimize pants must be properly adjusted the gap between the back of the occu-...
  • Page 117 For comfort the Active Head Re- NOTE: WARNING! (Continued) straints can be tilted forward and • The head restraints should only • Active Head Restraints may be rearward. To tilt the head restraint be removed by qualified techni- deployed if they are struck by an closer to the back of your head, pull cians, for service purposes only.

  • Page 118: Stow 'N Go® Seating

    Head Restraints — Second Row Head Restraints — Third Row 4. Slide the storage bin locking Quad Seats mechanism to the “LOCK” position The head restraint in the center posi- and then pull up on the storage bin To raise the head restraint, pull up- tion can be raised and lowered for latch to open the cover.
  • Page 119 The non-adjustable head restraint WARNING! and seatback will fold automatically In a collision, serious injury could during the seat tumble. No additional result if the seat storage bin covers actuation is necessary. are not properly latched. • Do not drive the vehicle with the storage bin covers open.

  • Page 120: Quad Seats

    Stow 'n Go® Seat — Folded And Latched Position To tumble or stow the seat from the folded and latched position: return the seatback and head restraint to the upright position. Then pull up on the seatback recliner lever on the out- board side of the seat to fold head rest Raising The Head Restraint Seatback Recliner Lever, Seat...
  • Page 121 WARNING! WARNING! (Continued) Do not ride with the seatback re- • Seats should be adjusted before clined so that the shoulder belt is no fastening the seat belts and while longer resting against your chest. In the vehicle is parked. Serious in- a collision you could slide under the jury or death could result from a seat belt, which could result in seri-...
  • Page 122 lift up on the easy entry lever located To provide additional space behind Place the strap around the grab near the bottom of the seat and lift the the second row seats, the seats can be handle located on the B-Pillar. Before seat forward.

  • Page 123: Third Row Power Recline

    THIRD ROW POWER NOTE: Lower the head restraint WARNING! by pulling on the release strap RECLINE (for To reduce the risk of personal in- marked “1” located on the out- versions/markets, where jury: board side of the head restraint. • Retainer strap must always be se- provided) curely attached to grab handle The power recline feature, located on...

  • Page 124: Manually Folding Third Row Seats

    Left and right third row seats can be • To abort seat operation while 2. Lower the outboard head re- folded individually or together. The seat is in motion, press a differ- straints by pulling on the release strap third row power folding seat adjusts ent seat position selector switch marked “1”...

  • Page 125: Plastic Grocery Bag Retainer Hooks

    WARNING! In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched. Tailgate Mode Release Strap “3” Stowed Third Row Seat 1.

  • Page 126: Driver Memory Seat

    SETTING MEMORY DRIVER MEMORY SEAT 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 POSITIONS AND LINKING (for versions/markets, FM stations can be set). RKE TRANSMITTER TO where provided) MEMORY 6. Turn the ignition switch to the The Memory Buttons 1 and 2 on the OFF position and remove the key.

  • Page 127: Easy Entry/Exit Seat

    12. Repeat the above steps to set the pedals stop moving. A delay of one signaling to you that the RKE trans- next Memory position using the other second will occur before another re- mitter link has been successfully dis- numbered Memory button or to link call can be selected.

  • Page 128: To Open And Close The Hood

    • When you remove the key from the Each stored memory setting will have ignition switch, the driver seat will an associated Easy Entry and Easy move about 60 mm rearward if the Exit Position. driver seat position is greater than NOTE: The Easy Entry/Easy Exit or equal to 68 mm forward of the feature can be enabled or disabled...

  • Page 129: Lights

    NOTE: The key must be out of the CAUTION! ignition switch or the ignition To prevent possible damage, do not switch must be in the OFF position slam the hood to close it. Lower the for this feature to operate. hood until it is open approximately 30 cm and then drop it.

  • Page 130: Parking Lights

    PARKING LIGHTS the headlight switch. When the sys- Features” in “Understanding Your In- tem is on, the Headlight Time Delay strument Panel” for further informa- feature is also on. This means your tion. Turn the headlight switch headlights will stay on for up to 90 HEADLIGHT DELAY (for knob to the first detent to turn seconds after you turn the ignition...

  • Page 131: Front And Rear Fog Lights

    EVIC. Refer to “Electronic Vehicle In- The front and rear fog lights or front fog lights are left on for ex- formation Center (EVIC)/Customer- may be operated as desired tended periods of time when the igni- Programmable Features” in “Under- when visibility is poor due to tion switch is in the LOCK position.

  • Page 132: Turn Signals

    HIGH/LOW BEAM SWITCH The multifunction lever controls the: NOTE: Broken, muddy or ob- structed headlights and taillights • Turn Signals When the headlights are turned on, of vehicles in the field of view will pushing the multifunction lever to- • Headlight Beams Low/High cause headlights to remain on lon- ward the instrument panel will switch ger (closer to the vehicle).

  • Page 133: Headlight Leveling System

    NOTE: This system will not acti- WINDSHIELD WIPERS Driver only, or driver vate until the vehicle is at, or AND WASHERS and front passenger. above, 40 km/h. All seating positions The wipers and washers are operated HEADLIGHT LEVELING occupied, plus an by a switch within the multifunction SYSTEM (for versions/ evenly distributed...

  • Page 134: Mist, Front Wiper And Washer

    REAR WIPER AND are in the off position, the wipers will WARNING! operate several wipe cycles, then turn WASHER Sudden loss of visibility through the off. windshield could lead to a collision. Rotating the rotary ring to the first You might not see other vehicles or INTERMITTENT, LOW AND detent activates the rear intermittent other obstacles.

  • Page 135: Rain Sensing Wipers

    RAIN SENSING WIPERS NOTE: The Rain Sensing system has protec- tive features for the wiper blades and (for versions/markets, • The Rain Sensing feature will arms. It will not operate under the where provided) not operate when the wiper following conditions: speed is in the low or high posi- This feature senses moisture on the tion.

  • Page 136: Tilt/Telescoping Steering Column

    TILT/TELESCOPING WARNING! STEERING COLUMN Do not adjust the steering column while driving. Adjusting the steer- This feature allows you to tilt the ing column while driving or driving steering column upward or down- with the steering column unlocked, ward. It also allows you to lengthen or could cause the driver to lose con- shorten the steering column.

  • Page 137: Electronic Speed Control

    Cruise Control Engaged” or “Ad- ELECTRONIC SPEED can be reactivated by pushing the justable Pedal Disabled — Vehicle Electronic Speed Control ON/OFF CONTROL In Reverse”. button and resetting the desired When engaged, the Electronic Speed vehicle set speed. NOTE: Control takes over accelerator opera- TO ACTIVATE tions at speeds greater than 40 km/h.

  • Page 138: To Set A Desired Speed

    TO SET A DESIRED SPEED TO VARY THE SPEED TO ACCELERATE FOR SETTING PASSING Turn the Electronic Speed Control ON. When the vehicle has reached the When the Electronic Speed Control is Press the accelerator as you would desired speed, press the SET (-) but- set, you can increase speed by pushing normally.

  • Page 139: Parksense® Rear Park Assist

    PARKSENSE® WARNING ParkSense® will retain the last sys- WARNING! tem state (enabled or disabled) from DISPLAY Electronic Speed Control can be the last ignition cycle when the igni- dangerous where the system cannot The ParkSense® Warning screen will tion is changed to the ON/RUN posi- maintain a constant speed.

  • Page 140: Parksense® Display

    PARKSENSE® DISPLAY The system will indicate a detected obstacle by showing three solid arcs When the vehicle is in REVERSE, the and will produce a one-half second warning display will turn ON indicat- tone. As the vehicle moves closer to ing the system status.

  • Page 141: Enabling/Disabling Parksense

    WARNING ALERTS Rear Distance Greater than 200-100 cm 100-65 cm 65-30 cm Less than 200 cm 30 cm Audible Alert None Single 1/2 Slow Fast Continuous Chime Second Tone Display Message Park Assist Sys- Warning Object Warning Object Warning Object Warning Object tem ON Detected...

  • Page 142: Cleaning The Parksense® System

    PARKSENSE® SYSTEM EVIC will display the “CLEAN PARK • ParkSense®, when on, will re- ASSIST SENSORS” or the “SER- duce the radio volume when it is USAGE PRECAUTIONS VICE PARK ASSIST SYSTEM” mes- sounding a tone. NOTE: sage for as long as the vehicle is in •...
  • Page 143 • On vehicles equipped with a WARNING! WARNING! (Continued) tailgate, ParkSense® should be • Drivers must be careful when • Before using the Rear Park Assist disabled when the tailgate is in backing up even when using the system, it is strongly recom- the lowered or open position Rear Park Assist system.

  • Page 144: Parkview® Rear Back Up Camera

    PARKVIEW® REAR Multimedia radio display screen along When displayed, static grid lines will with a caution note to “check entire illustrate the width of the vehicle BACK UP CAMERA (for surroundings” across the top of the while a dashed center-line will indi- versions/markets, where screen.

  • Page 145: Turning Parkview® On Or Off - With Navigation/Multimedia Radio

    5. Press the “save” soft-key. optional power sliding door switches CAUTION! (Continued) and an optional power liftgate switch. TURNING PARKVIEW® ON • To avoid vehicle damage, the ve- NOTE: Premium sunroof console OR OFF — WITHOUT hicle must be driven slowly when models include all of above except using ParkView®...

  • Page 146: Sunglass Storage (Non-Sunroof Only)

    The courtesy lights also function as reading lights. Press in on each lens to turn these lights on while inside the vehicle. Press a second time to turn each light off. You may adjust the direction of these lights by pressing the outside ring, which is identified with four directional arrows (LED lamps only).

  • Page 147: Rear Overhead Consoles

    (RKE) the lights will also turn on An additional LED at the front of the (for versions/markets, where pro- vided)” in “Understanding The Fea- when the UNLOCK button on the rear console shines down on the front tures Of Your Vehicle” for further infor- RKE transmitter is pressed.

  • Page 148: Opening Sunroof - Express

    CLOSING SUNROOF — and stop automatically. This is called WARNING! “Express Open”. During Express MANUAL MODE • Never leave children in a vehicle Open operation, any movement of the with the key in the ignition switch. To close the sunroof, press and hold sunroof switch will stop the sunroof.

  • Page 149: Venting Sunroof - Express

    VENTING SUNROOF — SUNROOF FULLY CLOSED windows open, open the front and rear windows together to minimize EXPRESS Press the switch forward and release the buffeting. If the buffeting occurs to ensure that the sunroof is fully Press and release the “Vent” button, with the sunroof open, adjust the sun- closed.
  • Page 150 The power outlets include tethered CAUTION! caps, labeled with a key or battery • Do not exceed the maximum symbol indicating the power source. power of 160 Watts (13 Amps) at The power outlet, located on the lower 12 Volts. If the 160 Watt (13 instrument panel, is powered directly Amp) power rating is exceeded from the battery.

  • Page 151: Smokers Package Kit

    the ash receiver, align the receiver so WARNING! CAUTION! (Continued) the thumb grip on the lid is facing To avoid serious injury or death: • Accessories that draw higher rearward. Press the ash receiver into • Only devices designed for use in power (i.e., coolers, vacuum either of the cup wells to secure.

  • Page 152: Cupholders

    The power inverter switch is located CUPHOLDERS wells. The cupholders are designed to on the instrument panel below the accommodate a wide variety of con- There cupholders located climate controls. tainer types and sizes. Press down on throughout the interior. All liners are the container to engage the cupholder To turn on the power outlet, press the removable for cleaning.

  • Page 153: Premium Console Cupholders

    INTERIOR BOTTLE Two outboard mesh pockets are on intermediate seating. The mesh pock- HOLDERS ets are flexible enough to hold juice There are four bottle holders located boxes, toys, games or MP3 players, in the interior. One bottle holder is etc.

  • Page 154: Storage

    DRIVER SEATBACK STORAGE STORAGE (for GLOVE COMPARTMENTS versions/markets, where Upper and lower glove compartments provided) are located on the passenger side of The drivers seatback has a primary the instrument panel. storage pocket on all models and an Upper Glove Compartment optional secondary mesh pocket.

  • Page 155: Second Row Floor Storage Bins

    CAUTION! WARNING! The storage bin cover must lay flat • Always close the storage bin cov- and be locked to avoid damage ers when your vehicle is unat- from contact with the front seat tended. tracks, which have minimal clear- •...

  • Page 156: Center And Rear Overhead Console Storage

    CAUTION! The storage bin cover must be flat and locked to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover. NOTE: In the event of an indi- Storage Bin Cover Overhead Console Features vidual being locked inside the Emergency Release Lever storage bin, the storage bin cover...

  • Page 157: Cargo Area Storage

    CARGO AREA STORAGE BASIC CONSOLE The liftgate sill plate has a raised line Basic Console features consist of the with the statement “Load To This following: Line”. This line indicates how far • The basic console profile allows ve- rearward cargo can be placed without hicle occupants to easily pass interfering with liftgate closing.

  • Page 158: Premium Console

    PREMIUM CONSOLE (for To Reinstall The Basic Floor • Multiple adjustments Console versions/markets, where • Removable from vehicle for addi- provided) 1. Position the console at a slight tional floor space. angle (front slightly higher than the The three-compartment console with The top and center console sections rear).
  • Page 159 Position 2 shows the raised storage 2. Lift the rear of the console up sev- tray revealing a large storage area be- eral inches/centimeters. low. 3. Pull rearward to disengage from floor and remove console. To Reinstall The Premium Floor Console: 1.

  • Page 160: Super Console

    SUPER CONSOLE (for versions/markets, where provided) The Super Console contains multiple storage areas, front lower pass through, top forward bin, top rear- ward bin and rear pull out drawer. Super Console Rear Drawer Storage The super console contains a pass CARGO AREA FEATURES through storage area accessible for 1 —...

  • Page 161: Rear Window Features

    Press in on the flashlight to release it. REAR WINDOW CAUTION! FEATURES Failure to follow these cautions can cause damage to the heating ele- REAR WINDOW ments: DEFROSTER • Use care when washing the inside of the rear window. Do not use The rear window defroster abrasive window cleaners on the button is located on the cli-...
  • Page 162 maximum of 68 kg. The roof rack • To help control wind noise, stow Bend the crossbar supports at each does not increase the total load carry- the crossbars in the side rails end, taking care to keep hand clear of ing capacity of the vehicle.
  • Page 163 NOTE: The crossbars are identi- Once the crossbars are set into posi- NOTE: Load should always be se- cured to crossbars first, with rail tie cal and can be placed in any two of tion, tighten the thumb screws com- down loops used as additional se- the three deploy positions.
  • Page 164 CAUTION! CAUTION! WARNING! (Continued) (Continued) Cargo must be securely tied before • To prevent damage to the roof of • Long loads which extend over the driving your vehicle. Improperly your vehicle, DO NOT carry any windshield, such as wood panels secured loads can fly off the vehicle, loads on the roof rack without the or surfboards, or loads with large...
  • Page 165 HEADLIGHT WASHER SUN SCREENS (for Once the screen is completely to the top of the window, extend the top bar (for versions/markets, versions/markets, where of the sun screen over the two hooks where provided) provided) attached to the top of the window. The multifunction lever operates the Sun screens are available for second headlight washers when the ignition...

  • Page 167: Understanding Your Instrument Panel

    UNDERSTANDING YOUR INSTRUMENT PANEL • INSTRUMENT PANEL FEATURES ... .165 • INSTRUMENT CLUSTER — GASOLINE ..166 • INSTRUMENT CLUSTER — DIESEL ..167 •...
  • Page 168 • VEHICLE INFO (CUSTOMER INFORMATION FEATURES) ..186 • MESSAGES......186 • UNITS .......186 •...
  • Page 169 • Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 ... . .198 • Dual Video Screen ..... .199 •...
  • Page 170 • CLIMATE CONTROLS .....215 • AUTOMATIC TEMPERATURE CONTROL (ATC) ....... .215 •...

  • Page 171: Instrument Panel Features

    INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Analog Clock 9 — DVD (for versions/ 13 — Ignition Switch markets, where provided) 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Storage Bin 14 — Hood Release 3 —...

  • Page 172: Instrument Cluster - Gasoline

    INSTRUMENT CLUSTER — GASOLINE...

  • Page 173: Instrument Cluster - Diesel

    INSTRUMENT CLUSTER — DIESEL...

  • Page 174: Instrument Cluster Descriptions

    INSTRUMENT CLUSTER 4. Turn Signal Indicators U.S. Federal regulations require that upon transfer of vehicle ownership, DESCRIPTIONS The arrow will flash with the the seller certify to the purchaser the exterior turn signal when the 1. Tachometer correct mileage that the vehicle has turn signal lever is operated.
  • Page 175 Message Display Area gASCAP the next scheduled oil change inter- val. The engine oil change indicator When the appropriate conditions ex- If the vehicle diagnostic system deter- system is duty cycle-based, which ist, the following odometer messages mines that the fuel filler cap is loose, means the engine oil change interval will display: improperly installed, or damaged, a...
  • Page 176 Electronic Vehicle Information possible to restore the benefits of is significantly under-inflated. Ac- Center (EVIC) Display — Anti-Lock brakes. If the ABS light cordingly, when the low tire pressure Equipped does not turn on when the ignition telltale illuminates, you should stop switch is turned to the ON/RUN posi- and check your tires as soon as pos- The Electronic Vehicle Information...
  • Page 177 illuminated. This sequence will con- In most situations, the vehicle will CAUTION! (Continued) tinue upon subsequent vehicle start- drive normally and will not require not of the same size, type, and/or ups as long as the malfunction exists. towing. style. Aftermarket wheels can cause When the malfunction indicator is il- sensor damage.
  • Page 178 10. Electronic Stability Control NOTE: 12. Speedometer (ESC) Activation/Malfunction Indi- • The “ESC Off Indicator Light” Indicates vehicle speed. cator Light (for versions/markets, “ESC Activation/ 13. Fuel Door Reminder where provided) Malfunction Indicator Light” The arrow in this symbol is “ESC Activation/ come on momentarily each time...
  • Page 179 16. Shift Lever Indicator 18. Brake Warning Light system. A leak in either half of the dual brake system is indicated by the The Shift Lever Indicator is self- This light monitors various Brake Warning Light, which will turn contained within the instrument clus- brake functions, including...
  • Page 180 Vehicles equipped with the Anti-Lock 19. Seat Belt Reminder Light CAUTION! Brake System (ABS), also When the ignition switch is Driving with a hot engine cooling equipped with Electronic Brake Force first turned to ON/RUN, this system could damage your vehicle. Distribution (EBD).

  • Page 181: Compass Mini-Trip Computer (Cmtc)

    21. Rear Fog Light Indicator NOTE: The system will display When the appropriate conditions ex- the last known outside tempera- ist, the following messages will dis- This indicator will illuminate ture when starting the vehicle and play: when the rear fog lights are may need to be driven several min- NE .

  • Page 182: Compass/Temperature Display

    COMPASS/TEMPERATURE Trip Odometer (ODO) / ECO (Fuel NOTE: Saver Indicator) (for DISPLAY • A good calibration requires a versions/markets, where level surface and an environ- Compass Variance provided) ment free from large metallic Compass Variance is the difference This display shows the distance trav- objects such buildings,...
  • Page 183 Compass Variance Map To Set The Variance use the "Plus (+)" button to change NOTE: The factory default Zone the variance value. Change the vari- is 8. During programming, the Start the engine, and leave the trans- ance one step at a time as necessary zone value will wrap around from mission gear selector lever in the until the desired variance is achieved.

  • Page 184: Electronic Vehicle Information Center

    Manual Compass Calibration ELECTRONIC VEHICLE • Trip Info INFORMATION CENTER If the compass appears erratic or in- • Tire BAR accurate, and the variance has been (EVIC) (for versions/ • Vehicle Info properly set, you may wish to manu- markets, where provided) ally recalibrate the compass.

  • Page 185: Center (Evic) Displays

    ELECTRONIC VEHICLE UP Button of the main display area for five sec- onds and then returns to the previous INFORMATION CENTER Press and release the UP screen. Most of the messages of this (EVIC) DISPLAYS button to scroll upward type are then stored (as long as the through the main menus The EVIC display consists of three condition that activated it remains ac-...
  • Page 186 • Five Second Unstored Messages • Press Brake Pedal and Push Button • Personal Settings Not Available — When the appropriate conditions oc- to Start Vehicle Not in Park cur, this type of message takes control • Liftgate Ajar (chime will sound •...

  • Page 187: Evic White Telltale Lights

    • Obstacle Detected • Exhaust System — Regeneration • Exhaust Filter % Full Completed. Indicates that the Die- EVIC WHITE TELLTALE • Driver Seatbelt Unbuckled sel Particulate Filter (DPF) self- LIGHTS cleaning is completed. If this mes- • Exhaust System — Regeneration Required Now.

  • Page 188: Evic Amber Telltale Lights

    • Electronic Speed Control SET SELECT button to turn off the mes- • Water In Fuel Indicator Light — sage. If the problem continues, the Diesel Engines Only This light will turn on when message will appear the next time the the electronic speed control Indicates there is water de- vehicle is started.
  • Page 189 the engine as soon as possible. A chime • Electronic Throttle Control • Engine Temperature Warning will sound when this light turns on. (ETC) Light Light Do not operate the vehicle until the This light informs you of a This light warns of an over- cause is corrected.

  • Page 190: Oil Change Due

    BACK button. To reset the oil change indicator system please refer WARNING! to a Lancia Dealership. If the Transmission Temperature Warning Light is illuminated and FUEL ECONOMY you continue operating the vehicle,...

  • Page 191: Vehicle Speed

    VEHICLE SPEED fuel tank level. DTE cannot be reset Trip B through the SELECT button. Shows the total distance traveled for Press and release the UP or DOWN Trip B since the last reset. NOTE: Significant changes button until “Vehicle Speed” displays driving style or vehicle loading highlighted in the EVIC and press the Elapsed Time...

  • Page 192: Vehicle Info

    VEHICLE INFO through the remaining stored mes- switch position, current ignition sta- sages. If there are no message, press- tus will be displayed in the lower right (CUSTOMER ing the SELECT button will do noth- corner of the EVIC display to the right INFORMATION FEATURES) ing.
  • Page 193 Automatic Compass Calibration Manual Compass Calibration (for Compass Variance versions/markets, where This compass is self-calibrating, Compass Variance is the difference provided) which eliminates the need to manu- between Magnetic North and Geo- ally reset the compass. When the ve- If the compass appears erratic and the graphic North.
  • Page 194 Compass Variance Map 1. Turn the ignition switch ON. 3. Press the DOWN button until the 4. Press and release the SELECT “Compass Variance” message is dis- button until the proper variance zone 2. Press the UP or DOWN button un- played in the EVIC, then press the is selected, according to the map.

  • Page 195: Customer-Programmable Features (System Setup)

    CUSTOMER- (for versions/markets, where pro- Enable/Disable the Rear Park vided). Press the UP or DOWN button Assist System (for versions/ PROGRAMMABLE while in this display and scroll markets, where provided) FEATURES (SYSTEM through the language choices. Press The Rear Park Assist system will scan SETUP) the SELECT button to select English, for objects behind the vehicle when...
  • Page 196 selection, press and release the SE- RKE Linked To Memory (for showing the system has been acti- LECT button until a check-mark ap- versions/markets, where vated or the check-mark is removed pears next to the feature showing the provided) showing the system has been deacti- system has been activated or the vated.
  • Page 197 appears next to the setting, showing Intermittent Wiper Options (for or down until the preferred setting is that the setting has been selected. versions/markets, where highlighted, then press and release the provided) SELECT button until a check-mark Headlamps with Wipers appears next to the setting, showing When this feature is selected, the (Available with Auto Headlights...
  • Page 198 or the check-mark is removed show- has been activated or the check-mark Blind Spot Alert (for ing the system has been deactivated. is removed showing the system has versions/markets, where provided) been deactivated. There are three selections when oper- Keyless Enter-N-Go (Passive ating Blind Spot Alert (“Blind Spot Entry) (for versions/markets, NOTE: The seat will return to the...

  • Page 199: Sound Systems

    NOTE: If your vehicle has experi- SOUND SYSTEMS This feature allows an iPod® or exter- enced any damage in the area nal USB device to be plugged into the Refer to your Sound Systems Booklet. where the sensor is located, even if USB port, located in the glove com- the fascia is not damaged, the sen- partment.

  • Page 200: Ipod®/Usb/Mp3 Control

    Connecting The iPod® Or Once the audio device is connected • The audio device can be controlled and synchronized to the vehicle's using the radio buttons to Play, External USB Device iPod®/USB/MP3 control system Browse, List iPod® Use the connection cable to connect (iPod®...

  • Page 201: List Or Browse Mode

    buttons on the radio faceplate may be • A single press backward << RW or • Press the SCAN button to use used to control the iPod® or external forward FF>> will jump backward iPod®/USB/MP3 device scan USB device and display data: or forward respectively, for five sec- mode, which will play the first 10 onds.
  • Page 202 • TUNE control knob: The TUNE • In List mode, the radio PRESET iPod® or external USB device sub- control knob functions in a similar buttons are used as shortcuts to menu levels are available on this manner as the scroll wheel on the the following lists on the iPod®...

  • Page 203: Bluetooth Streaming Audio (Btsa)

    Bluetooth Streaming Audio Selecting Different Audio Device UCONNECT™ (BTSA) MULTIMEDIA VIDEO 1. Press PHONE button to begin. ENTERTAINMENT Music can be streamed from your cel- 2. After the "Ready" prompt and the SYSTEM (VES)™ (for lular phone to the Uconnect™ phone following beep, say "Setup", then system.

  • Page 204: Play Video Games

    • Turn on the VES™ player (for Up/Down/Left/Right buttons or by versions/markets, where provided repeatedly pressing the MODE but- on Dual Screen System) by pushing ton, then press ENTER on the Remote Control. the Power button, located on the far left, or by pressing the button on Using The Touch-Screen Radio the Remote Control.

  • Page 205: Dual Video Screen

    Using The Remote Control choose an audio source. To exit touch 3. To watch a DVD on Screen 1 for the back arrow soft-key at the top left second row passengers, ensure the Re- 1. Press the MODE button on the Re- of the left screen.

  • Page 206: Play A Dvd Using The Ves™ Player

    Using The Touch-Screen Radio automatic transmission. In ve- 2. To watch a DVD on Screen 1 for Controls hicles with manual transmission second row passengers, ensure the Re- the parking brake must be mote Control and Headphone switch 1. Press the MENU hard-key on the engaged.

  • Page 207: Listen To An Audio Source While A Video Is Playing

    • The VES™ will retain the last PARK position for vehicles with setting when turned off. automatic transmission. In ve- hicles with manual transmission Using The Touch-Screen Radio the parking brake must be en- Controls gaged. 1. Press the MENU hard-key on the Listen To An Audio Source radio faceplate.

  • Page 208: Third Row Swivel Screen

    3. To listen to an audio source on • Audio can be heard through the Channel 2 while a video is playing on headphones even when Channel 1, touch the 2 soft-key and screen(s) are closed. choose an audio source. To exit touch Remote Control the back arrow soft-key at the top left of the left screen.
  • Page 209 3. Light – Turns the remote control 7. MENU – Press to return to the 13. STATUS – Press to display the backlighting on or off. The remote main menu of a DVD disc, to select a current status. backlighting turns off automatically satellite audio channel from the Sta- 14.

  • Page 210: Remote Control Storage

    Replacing The Remote track or video chapter. In menu modes use to navigate in the menu. Control Batteries 18. ENTER – Press to select the The remote control requires two AAA highlighted option in a menu. batteries for operation. To replace the batteries: 19.

  • Page 211: Controls

    If no audio is heard after increasing can be heard from the head- 3. If the video screen is displaying a the volume control, verify that the phones. To conserve battery life, video source (such as a DVD Video), screen is turned on and in the down the headphones will automatically pressing STATUS shows the status on turn off approximately three min-...

  • Page 212: Unwired® Stereo Headphone Lifetime Limited

    • Replace the batteries, making sure misuse, abuse or modification of the replace any defective Product. Un- to orient them according to the po- Product other than by Unwired. Foam wired® reserves the right to replace larity diagram shown. earpieces, which will wear over time any discontinued Product with a com- through normal use, are specifically parable model.
  • Page 213 If the radio functions (FM, AM, or The VES™ can even control radio 7. Channel 1 ENTER Button Action SAT) are in the shared mode with the modes or video modes while the radio 8. Channel 2 ENTER Button Action VES™, only the radio is able to con- is turned off.
  • Page 214 4. After all of the digits are entered, Display Settings select the Default Settings menu op- navigate to the Go button and press tion and press the remote control’s the remote control’s ENTER button. ENTER button. Station List Menu Disc Features control the remote DVD player's (for versions/markets, where When listening to Satellite audio, provided) settings of DVD being...
  • Page 215 If the screen is closed and there is no DVD Region Codes a CD-ROM containing MP3 or WMA audio heard, verify that the head- files. The player will also play DVD- The VES™ DVD player and many phones are turned on (the ON indica- Video content recorded to a DVD-R or DVD discs are coded by geographic DVD-RW disc.
  • Page 216 • The player recognizes a maximum • The DVD player always uses the • If you are creating your own files, of 512 files and 99 folders per file extension to determine the au- the recommended fixed bit rate for CD-R and CD-RW disc.
  • Page 217 If a disc has a damaged track which Display Language item you want to edit, results in audible or visible errors that and then press the remote control Other Language Setup persists for 2.0 seconds, the DVD ENTER button. player will attempt to continue play- •...
  • Page 218 Here is an abbreviated list of language must enter the correct password using To set the password, activate the DVD codes. For more language codes, the password entry method described Setup Menu and follow these addi- please contact the dealer where the below.
  • Page 219 • After the four-digit password is en- • Enter the current password. Select viewing uses otherwise authorized by tered, press the remote control’s a digit, use the remote control’s Up Macrovision. Reverse engineering or ENTER button to accept the and Down cursor buttons to set the disassembly is prohibited.

  • Page 220: Steering Wheel Audio Controls

    STEERING WHEEL The left-hand rocker switch has a If you press the switch up or down pushbutton in the center. The func- twice it plays the second track; three AUDIO CONTROLS tion of the left-hand switch is differ- times, it will play the third, etc. ent, depending on which mode you The button in the center of the left- are in.

  • Page 221: Radio Operation And Mobile Phones

    7. Do not store the disc where tem- CLIMATE CONTROLS The Three-Zone ATC system auto- peratures may become too high. matically maintains the interior com- The Climate Control system allows fort level desired by the driver and all NOTE: If you experience diffi- you to regulate the temperature, passengers.
  • Page 222 2. Left Front Seat Occupant Tem- 8. Front Defrost Button 12. Auto Temperature perature Display Control Button Press and release to change the cur- This display shows the temperature rent setting, the indicator illuminates Controls airflow temperature, distri- setting for the left front seat occupant. when ON.
  • Page 223 16. Recirculation Control Button display (below) will appear. Con- 4. Rear Auto Indicator trol functions now operate rear sys- Press and release to change the cur- This indicates when the system is in tem. rent setting, the indicator illuminates Rear Auto mode. when ON.
  • Page 224 NOTE: Rear Mode Control AUTO symbol in the front ATC dis- play will be turned off when the sys- Headliner Mode • It is not necessary to move the tem is being used in the manual mode. temperature settings for cold or Air comes from the outlets in hot vehicles.
  • Page 225 operate at a fixed speed until addi- NOTE: In many temperature po- NOTE: While operating in the tional speeds are selected. This allows sitions, the BI-LEVEL mode is de- other modes, the system will not the front occupants to control the vol- signed to provide cooler air out of automatically sense the presence the panel outlets and warmer air...
  • Page 226 • If fog or mist appears on the Rear Automatic Temperature windshield or side glass, select Control (ATC) — If Equipped Defrost mode increase The rear ATC system has floor air blower speed. outlets at the rear of the right side sliding door, and overhead outlets at Recirculation Control each outboard rear seating position.
  • Page 227 up for your comfort level, it is not seat occupants to control the volume knob is illuminated and any rear over- necessary to change the settings. You of air circulated in the rear of the head adjustments are ignored. will experience the greatest efficiency vehicle.
  • Page 228 VACATION/STORAGE Floor Mode drains. In Winter months make sure the air intake is clear of ice, slush and Air comes from the floor out- Before you store your vehicle, or keep snow. lets. it out of service (i.e., vacation) for two OPERATING TIPS weeks or more, run the air condition- SUMMER OPERATION...

  • Page 229: Starting And Operating

    STARTING AND OPERATING • STARTING PROCEDURES ....227 • AUTOMATIC TRANSMISSION ... . .227 •...
  • Page 230 • POWER STEERING ..... . .240 • POWER STEERING FLUID CHECK ..240 •...
  • Page 231 • LIMITED-USE SPARE (for versions/markets, where provided) ..250 • TIRE SPINNING ..... . .250 • TREAD WEAR INDICATORS ....251 •...
  • Page 232 • ADDING FUEL ......270 • LOCKING FUEL FILLER CAP (GAS CAP) (for versions/markets, where provided) ..270 •...

  • Page 233: Starting Procedures

    AUTOMATIC STARTING Using Fob With Integrated Key (Tip Start) TRANSMISSION PROCEDURES NOTE: Normal starting of either a The shift lever must be in the NEU- Before starting your vehicle, adjust cold or a warm engine is obtained TRAL or PARK position before you your seat, adjust the inside and out- without pumping or pressing the can start the engine.

  • Page 234: Keyless Enter-N-Go

    KEYLESS ENTER-N-GO Removing The Button attempts to start the vehicle. If the vehicle fails to start, the starter will (for versions/markets, 1. The ENGINE START/STOP but- disengage automatically after 10 sec- where provided) ton can be removed from the ignition onds.

  • Page 235: Extreme Cold Weather (Below −29°C)

    IF ENGINE FAILS TO remain running. Never leave a vehicle • Starting with the ignition switch in out of the PARK position, or it could the OFF position: START roll. • Press the ENGINE START/STOP WARNING! NOTE: If the ignition switch is left button once to change the ignition •...

  • Page 236: After Starting

    Clearing A Flooded Engine (Using 1. Press the accelerator pedal all the 2. Watch for the “Wait To Start ENGINE START/STOP Button) way to the floor and hold it. Light” in the instrument cluster. Refer to “Instrument Cluster” in “Under- If the engine fails to start after you 2.
  • Page 237 Starting And Operating Cautions • Before turning off your turbo diesel Turbocharger Cool Down – Diesel Engine engine, always allow the engine to NOTE: Letting the engine idle af- return to normal idle speed and run ter extended operation allows the WARNING! for several seconds.

  • Page 238: Automatic Transmission

    AUTOMATIC WARNING! WARNING! (Continued) TRANSMISSION • It is dangerous to shift out of • Never leave children alone in a PARK or NEUTRAL if the engine vehicle, or with access to an un- CAUTION! speed is higher than idle speed. If locked vehicle.

  • Page 239: Brake/Transmission Shift Interlock

    SIX-SPEED AUTOMATIC LOCK/OFF position, and once re- moved, the shift lever is locked in TRANSMISSION PARK. The shift lever position display (lo- NOTE: If a malfunction occurs, cated in the instrument cluster) indi- the system will trap the key fob in cates the transmission gear range.

  • Page 240: Gear Ranges

    GEAR RANGES When parking on a hill, apply the WARNING! (Continued) parking brake before placing the shift DO NOT race the engine when shift- • Unintended movement of a ve- lever in PARK, otherwise the load on ing from PARK or NEUTRAL into hicle could injure those in or near the transmission locking mechanism another gear range.
  • Page 241 The following indicators should be parking brake and shift the transmis- WARNING! (Continued) used to ensure that you have engaged sion into PARK if you must leave the • Allowing children to be in a ve- the shift lever into the PARK position: vehicle.
  • Page 242 transmission automatically upshifts inhibited until the transmission fluid In the event of a momentary problem, through underdrive first, second, is warm (refer to the “Note” under the transmission can be reset to regain third, and fourth gears, direct fifth “Torque Converter Clutch” in this all forward gears by performing the section).
  • Page 243 Electronic Range Select (ERS) You can switch between DRIVE and until “D” is once again displayed in Operation ERS mode at any vehicle speed. When the shift lever position indicator in the the shift lever is in the DRIVE posi- instrument cluster.

  • Page 244: Driving On Slippery Surfaces

    Torque Converter Clutch DRIVING ON SLIPPERY surface. This is known as hydroplan- ing and may cause partial or complete SURFACES A feature designed to improve fuel loss of vehicle control and stopping economy has been included in the au- ACCELERATION ability.

  • Page 245: Flowing/Rising Water

    FLOWING/RISING WATER CAUTION! CAUTION! (Continued) Always check the depth of the Driving through standing water WARNING! standing water before driving may cause damage to your vehicle’s Do not drive on or across a road or through it. Never drive through drivetrain components.

  • Page 246: Power Steering

    POWER STEERING and it does not in any way dam- WARNING! age the steering system. • Driving through standing water The standard power steering system limits your vehicle’s traction ca- will give you good vehicle response WARNING! pabilities. Do not exceed 8 km/h and increased ease of maneuverability Continued operation with reduced when driving through standing...

  • Page 247: Parking Brake

    PARKING BRAKE NOTE: CAUTION! Do not use chemical flushes in your • When the parking brake is ap- Before leaving the vehicle, make sure power steering system as the plied and the automatic trans- that the parking brake is fully applied chemicals can damage your power mission is placed in gear, the and place the shift lever in the PARK...

  • Page 248: Anti-Lock Brake System (Abs)

    You may experience the following WARNING! CAUTION! when the brake system goes into anti- • Never use the PARK position as a If the Brake System Warning Light lock: substitute for the parking brake. remains on with the parking brake Always apply the parking brake released, a brake system malfunc- •...

  • Page 249: Anti-Lock Brake Warning Light

    ANTI-LOCK BRAKE If both the “Brake Warning Light” WARNING! (Continued) and the “Anti-Lock Brake Warning WARNING LIGHT • Pumping of the Anti-Lock Brakes Light” remain on, the ABS and Elec- will diminish their effectiveness tronic Brake Force Distribution and may lead to a collision. “Anti-Lock Brake (EBD) systems are not functioning.

  • Page 250: Traction Control System (Tcs) (For Versions/Markets, Where Provided)

    TRACTION CONTROL BRAKE ASSIST SYSTEM The “ESC Activation/Malfunction In- dicator Light” (in the instrument SYSTEM (TCS) (FOR (BAS) (FOR VERSIONS/ cluster) will start to flash as soon as VERSIONS/MARKETS, MARKETS, WHERE the tires lose traction and the wheels WHERE PROVIDED) PROVIDED) begin to spin.

  • Page 251: Electronic Stability Control (Esc)

    ELECTRONIC STABILITY WARNING! WARNING! CONTROL (ESC) • The BAS cannot prevent the The Electronic Stability Control natural laws of physics from act- (ESC) cannot prevent the natural The Electronic Stability Control (ESC) ing on the vehicle, nor can it in- laws of physics from acting on the enhances directional control and sta- crease the traction afforded by...
  • Page 252 ESC Operating Modes mode is intended to be used if the ESC Activation/Malfunction vehicle is in deep snow, sand or gravel Indicator Light And ESC OFF conditions and more wheel spin than Indicator Light The “ESC Off” switch is lo- ESC would normally allow is required “ESC Activation/...

  • Page 253: Tires - General Information

    If the “ESC Activation/Malfunction In- The “ESC OFF Indicator WARNING! (Continued) dicator Light” begins to flash during Light” indicates the Elec- • Over-inflated or under-inflated acceleration, ease up on the accelerator tronic Stability Control tires can affect vehicle handling (ESC) is off. and apply as little throttle as possible.

  • Page 254: Tire Inflation Pressures

    Ride Comfort And Vehicle Example: If garage temperature is CAUTION! Stability 20°C and the outside temperature is After inspecting or adjusting the 0°C, then the cold tire inflation pres- Proper tire inflation contributes to a tire pressure, always reinstall the sure should be increased by 0.21 comfortable ride.

  • Page 255: Radial-Ply Tires

    SPARE TIRE MATCHING WARNING! CAUTION! ORIGINAL EQUIPPED High speed driving with your ve- Because of the reduced ground TIRE AND WHEEL (for hicle under load is dangerous. The clearance, do not take your vehicle added strain on your tires could versions/markets, where through an automatic car wash cause them to fail.

  • Page 256: Full Size Spare

    FULL SIZE SPARE (for Since this tire has limited tread life the Installation of this limited-use spare original equipment tire should be re- tire affects vehicle handling. Since it is versions/markets, where paired (or replaced) and reinstalled not the same as your original equip- provided) on your vehicle at the first opportu- ment tire, replace (or repair) the origi-...

  • Page 257: Tread Wear Indicators

    wheels faster than 48 km/h, or for WARNING! more than 30 seconds continuously, The tires and the spare tire should without stopping. be replaced after six years, regard- Refer to “Freeing A Stuck Vehicle” in less of the remaining tread. Failure “What To Do In Emergencies”...
  • Page 258 original equipment tire sidewall. See WARNING! WARNING! (Continued) the Tire Sizing Chart example found • Do not use a tire, wheel size or • Failure to equip your vehicle with in the Tire Safety Information section rating other than that specified tires having adequate speed capa- of this manual for more information for your vehicle.

  • Page 259: Tire Safety Information

    TIRE SAFETY NOTE: • Temporary spare tires spares designed for temporary INFORMATION • P (Passenger) - Metric tire sizing emergency use only. Temporary is based on U.S. design stan- Tire Markings high pressure compact spare dards. P-Metric tires have the tires have the letter “T”...
  • Page 260 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards "..blank.." = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T or S = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = Aspect ratio in percent (%)
  • Page 261 EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...

  • Page 262: Tire Identification Number (Tin)

    Tire Identification Number code may only be on one side. Tires of black sidewall tires as mounted on with white sidewalls will have the full the vehicle. If the TIN is not found on (TIN) TIN, including the date code, located the outboard side, then you will find it The TIN may be found on one or both on the white sidewall side of the tire.

  • Page 263: Tire Terminology And Definitions

    Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the ve- hicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.

  • Page 264: Tire Loading And Tire Pressure

    Tire Loading And Tire Tire And Loading Information NOTE: Under a maximum loaded Placard vehicle condition, gross axle Pressure weight ratings (GAWRs) for the Tire And Loading Information This placard tells you important front and rear axles must not be Placard Location information about the: exceeded.
  • Page 265 Steps For Determining Correct 4. The resulting figure equals the NOTE: Load Limit available amount of cargo and lug- • The following table shows ex- gage load capacity. For example, if 1. Locate the statement “The com- amples on how to calculate total “XXX”...

  • Page 267: Tire Rotation Recommendations

    The reasons for any rapid or unusual the vehicle is driven - this is normal WARNING! wear should be corrected prior to ro- and there should be no adjustment for Overloading of your tires is danger- tation being performed. this increased pressure. ous.
  • Page 268 For example, your vehicle may have a • The TPMS should not be used as CAUTION! recommended cold (parked for more a tire pressure gauge while ad- • The TPMS has been optimized than three hours) tire pressure of 2.4 justing your tire pressure.

  • Page 269: Base System

    BASE SYSTEM LOW PRESSURE" message will dis- fault will also sound a chime. If the play in the instrument cluster, and an ignition switch is cycled, this se- The TPMS uses wireless technology audible chime will be activated when quence will repeat, providing the sys- with wheel rim mounted electronic sen- one or more of the four active road tire tem fault still exists.

  • Page 270: Premium System

    Vehicles With Compact Spare the vehicle in place of the compact “Tire Pressure Monitoring Telltale spare tire, the TPMS will automati- Light.” To reactivate the TPMS, first, 1. The compact spare tire (for cally update, and the “Tire Pressure replace all four wheel and tire assem- versions/markets, where provided) blies (road tires) with those equipped Monitoring Telltale Light”...
  • Page 271 • Four TPMS Sensors SERVICE TPM SYSTEM Message The “Tire Pressure Monitoring Tell- • Various TPMS messages, which tale Light” will flash on and off for 75 display in the Electronic Vehicle In- seconds, and remain on solid when a formation Center (EVIC), and system fault is detected.
  • Page 272 SYSTEM” message will not be pres- still shown. This indicates that the 3. After driving the vehicle for up to ent, and a pressure value will be dis- pressure values are still being received 20 minutes above 24 km/h, the “Tire played instead of dashes.

  • Page 273: Tpms Deactivation And Reactivation

    5. Once you repair or replace the with TPM Sensors. Then, drive the graphic will display tire pressure val- original road tire, and reinstall it on vehicle for at least 20 minutes above ues to show that the TPMS is receiving the vehicle in place of the compact 24 km/h.

  • Page 274: Methanol

    Over 40 automobile manufacturer's not have the negative effects of CAUTION! world wide have issued and endorsed Methanol. Do not use gasolines containing consistent gasoline specifications (the Methanol or E-85 Ethanol. Use of CAUTION! World Wide Fuel Charter, WWFC) these blends may result in starting which define fuel properties necessary Use of fuel with Ethanol content and driveability problems and may...

  • Page 275: Materials Added To Fuel

    Gasoline blended with MMT provides Indiscriminate use of fuel system WARNING! (Continued) no performance advantage beyond cleaning agents should be avoided. • Guard against carbon monoxide gasoline of the same octane number Many of these materials intended for with proper maintenance. Have gum and varnish removal may con- without MMT.

  • Page 276: Adding Fuel

    ADDING FUEL 3. When tightening the filler cap, WARNING! (Continued) tighten until two or three clicks are • Never add fuel when the engine is LOCKING FUEL FILLER heard to ensure that the cap is prop- running. It may cause the MIL to CAP (GAS CAP) (for erly seated.

  • Page 277: Trailer Towing

    TRAILER TOWING Gross Trailer Weight (GTW) WARNING! The GTW is the weight of the trailer It is important that you do not ex- In this section you will find safety tips plus the weight of all cargo, consum- ceed the maximum front or rear and information on limits to the type ables and equipment (permanent or GAWR.

  • Page 278: Breakaway Cable Attachment

    With Attachment Point Without Attachment Points WARNING! An improperly adjusted hitch sys- 1. For detachable tow bar pass the 1. For detachable ball tow bar you tem may reduce handling, stability cable through the attachment point must follow the recommended manu- and braking performance and and clip it back onto itself.
  • Page 279 Trailer Towing Weights Trailer And Tongue Weight total load on your vehicle. Refer to (Maximum Trailer Weight the Tire and Loading Information Loads balanced over the wheels or Ratings) placard, located on the drivers heavier in the rear can cause the door pillar, for the maximum com- The following chart provides the trailer to sway severely side to side...
  • Page 280 Towing Requirements – Tires WARNING! WARNING! (Continued) • Do not attempt to tow a trailer Improper towing can lead to an in- • Safety chains must always be while using a compact spare tire. jury accident. Follow these guide- used between your vehicle and lines to make your trailer towing as trailer.
  • Page 281 Towing Requirements – Trailer The electrical connections are all WARNING! Brakes complete to the vehicle but you must • Do not connect trailer brakes to mate the harness to a trailer connec- – Do not interconnect the hydraulic your vehicle's hydraulic brake tor.
  • Page 282 Seven - Pin Connector Details Thirteen - Pin Connector De- tails Wire Function Color Function Wire Color Right Rear Po- Brown sition, Side Right Rear Po- Brown Marker Lights, sition, Side and Rear Reg- Marker Lights, istration Plate and Rear Reg- Thirteen - Pin Connector Illumination istration Plate...

  • Page 283: Towing Tips

    TOWING TIPS Electronic Speed Control (for Thirteen - Pin Connector De- versions/markets, where tails Before setting out on a trip, practice provided) Function Wire turning, stopping and backing the Color • Do not use in hilly terrain or with trailer in an area away from heavy heavy loads.
  • Page 284 Trailer Hitch Attaching Points Trailer Tow Hitch Attaching Points And Overhang Dimen- Your vehicle will require extra equip- sions ment to tow a trailer safely and effi- ciently. The trailer tow hitch must be Grand Voyager attached to your vehicle using the provided attaching points on the ve- 441.72 mm hicle's frame.

  • Page 285: Recreational Towing (Behind Motorhome, Etc.)

    RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE Towing Condition Wheels OFF the Ground All Models Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL Wheel Lift or Dolly Tow Rear • 40 km/h max speed •...

  • Page 287: What To Do In Emergencies

    WHAT TO DO IN EMERGENCIES • HAZARD WARNING FLASHERS ... . .282 • IF YOUR ENGINE OVERHEATS ....282 •...

  • Page 288: Hazard Warning Flashers

    HAZARD WARNING IF YOUR ENGINE CAUTION! FLASHERS OVERHEATS Driving with a hot cooling system could damage your vehicle. If tem- The Hazard Warning flasher switch is In any of the following situations, you perature gauge reads “H”, pull over located in the lower center area of the can reduce the potential for overheat- and stop the vehicle.

  • Page 289: Jacking And Tire Changing

    JACK LOCATION JACKING AND TIRE CHANGING The jack, jack handle and winch handle tools are stowed behind the WARNING! rear left side trim panel in the rear • Do not attempt to change a tire on cargo area. Turn the two cover latches the side of the vehicle close to to release the cover.

  • Page 290: Spare Tire Tools

    SPARE TIRE TOOLS Super Console For vehicles equipped with the Super The tool pouch contains three pieces Console, the spare tire winch assem- and can be assembled into a spare tire bly drive nut is located beneath the hook; to remove the compact spare tire/ console.

  • Page 291: Spare Tire Removal Instructions

    1. Assemble the spare tire tools into a T-handle and place the square end over the spare tire winch drive nut. 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in the cable to allow you to pull the spare tire out from underneath the vehicle.

  • Page 292: Preparations For Jacking

    PREPARATIONS FOR NOTE: Passengers should not WARNING! (Continued) remain in the vehicle when the ve- JACKING • Do not get under the vehicle when hicle is being jacked. it is on a jack. If you need to get 1. Park the vehicle on a firm, level JACKING INSTRUCTIONS under a raised vehicle, take it to a surface.
  • Page 293 NOTE: Refer to the “Compact Rear jack locations are between a pair NOTE: In some situations the Spare Tire” section of “Tires – of down-facing tabs on the sill flange jack may need to be placed on its General Information” for informa- of the vehicle side body.
  • Page 294 4. Raise the vehicle by turning the 8. Finish tightening the lug nuts. CAUTION! jack screw to the right, using the Push down on the wrench while at the Be sure to mount the spare tire with swivel wrench. Raise the vehicle only end of the handle for increased lever- the valve stem facing outward.

  • Page 295: Securing The Spare Tire

    11. Stow the cable and wheel spacer WARNING! CAUTION! before driving the vehicle. Reas- A loose compact spare tire/cover The compact spare tire/cover as- semble the winch handle extensions to assembly, thrown forward in a col- sembly must be used when the form a “T”...

  • Page 296: Road Tire Installation

    5. Continue to rotate the nut to the WARNING! right until you hear the winch mecha- To avoid the risk of forcing the ve- nism click three times. It cannot be hicle off the jack, do not tighten the overtightened. Check under the ve- wheel nuts fully until the vehicle hicle to ensure the compact spare tire/ has been lowered.

  • Page 297: Jump-Starting

    Vehicles Without Wheel Covers 5. After 40 km check the lug nut WARNING! torque with a torque wrench to ensure 1. Mount the road tire on the axle. Do not attempt jump-starting if the that all lug nuts are properly seated battery is frozen.

  • Page 298: Jump-Starting Procedure

    3. If using another vehicle to jump- 1. Connect the positive (+) end of the WARNING! start the battery, park the vehicle jumper cable to the positive (+) post of • Take care to avoid the radiator within the jumper cables reach, set the discharged vehicle.

  • Page 299: Freeing A Stuck Vehicle

    5. Start the engine in the vehicle that the battery and charging system in- Then shift back and forth between has the booster battery, let the engine spected at your authorized dealer. DRIVE and REVERSE while gently idle a few minutes, and then start the pressing the accelerator.
  • Page 300 NOTE: Press "ESC Off" CAUTION! WARNING! switch, to place the Electronic Sta- • When “rocking” a stuck vehicle Fast spinning tires can be danger- bility Control (ESC) system in by shifting between DRIVE and ous. Forces generated by excessive "Partial Off" mode before rocking REVERSE, do not spin the wheel speeds may cause damage, or the vehicle.

  • Page 301: Towing A Disabled Vehicle

    TOWING A DISABLED VEHICLE NOTE: This section describes procedures for towing a disabled vehicle using a commercial wrecker service. Towing Condition Wheels OFF the Ground ALL MODELS Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL Wheel lift or Dolly Tow Rear •...

  • Page 302: Shift Lever Override

    • The towing distance must not ex- SHIFT LEVER 4. Press and maintain firm pressure ceed 24 km. on the brake pedal. OVERRIDE • The towing speed must not exceed 5. Insert a screwdriver or similar tool If a malfunction occurs and the shift 40 km/h.

  • Page 303: Maintaining Your Vehicle

    MAINTAINING YOUR VEHICLE • ENGINE COMPARTMENT — 3.6L ... .299 • ENGINE COMPARTMENT — 2.8L DIESEL ..300 • ONBOARD DIAGNOSTIC SYSTEM — OBD II . . .301 •...
  • Page 304 • FUSES ....... . .319 • TOTALLY INTEGRATED POWER MODULE . .319 •...

  • Page 305: Engine Compartment - 3.6L

    ENGINE COMPARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 — Coolant Pressure Cap 5 —...

  • Page 306: Engine Compartment - 2.8L Diesel

    ENGINE COMPARTMENT — 2.8L DIESEL 1 — Air Cleaner Filter 5 — Totally Integrated Power Module (Fuses) 2 — Engine Oil Fill 6 — Engine Coolant Reservoir 3 — Brake Master Cylinder 7 — Engine Oil Dipstick 4 — Battery 8 —...

  • Page 307: Onboard Diagnostic System - Obd Ii

    ONBOARD DIAGNOSTIC MAINTENANCE CAUTION! SYSTEM — OBD II PROCEDURES • Prolonged driving with the MIL on could cause further damage to Your vehicle is equipped with a so- The pages that follow contain the re- the emission control system. It phisticated onboard diagnostic sys- quired maintenance services deter- could also affect fuel economy...

  • Page 308: Engine Oil

    Overfilling or underfilling will • Car maintenance should be done Checking Oil Level cause oil aeration or loss of oil pres- at a LANCIA Dealership. For To assure proper engine lubrication, sure. This could damage your en- routine and minor maintenance the engine oil must be maintained at gine.

  • Page 309: Engine Oil Filter

    Engine oil is an engi- vice. LANCIA engine oil filters are a neered product and its performance high quality oil filter and are recom- may be impaired by supplemental ad- mended.

  • Page 310: Intervention Regeneration Strategy - 2.8L Diesel Engine

    The best protection against carbon LANCIA engine air cleaner filters are son you. To avoid breathing CO, monoxide entry into the vehicle body a high quality filter and are recom- refer to “Safety Tips/Exhaust Gas”...

  • Page 311: Maintenance-Free Battery

    MAINTENANCE-FREE unusual situations involving CAUTION! grossly malfunctioning engine opera- BATTERY Damage to the catalytic converter tion, a scorching odor may indicate can result if your vehicle is not kept The top of the maintenance-free bat- severe and abnormal catalyst over- in proper operating condition.

  • Page 312: Air Conditioner Maintenance

    AIR CONDITIONER WARNING! WARNING! (Continued) MAINTENANCE • Use only refrigerants and com- • Battery posts, terminals, and re- pressor lubricants approved by lated accessories contain lead and For best possible performance, your the manufacturer for your air lead compounds. Wash hands af- air conditioner should be checked and conditioning system.
  • Page 313 Car maintenance should be done at 4. Disengage the two retaining tabs an arrow to indicate airflow direc- a LANCIA Dealership. For routine that secure the filter cover to the tion through the filter. Failure to and minor maintenance operations HVAC housing, and remove the cover.

  • Page 314: Body Lubrication

    Car maintenance should be done at Locks and all body pivot points, in- gine oil, gasoline, etc. a LANCIA Dealership. For routine cluding such items as seat tracks, door and minor maintenance operations NOTE: Life expectancy of wiper...

  • Page 315: Cooling System

    Car maintenance should be done at coming from under the hood, do containers. a LANCIA Dealership. For routine not open the hood until the radia- and minor maintenance operations The washer fluid reservoir will hold 4 tor has had time to cool.
  • Page 316 applicable). If the engine coolant (an- Cooling System – Drain, Flush, CAUTION! tifreeze) is dirty or rusty in appear- And Refill • Mixing of engine coolant (anti- ance, the system should be drained, If the engine coolant (antifreeze) is freeze) other than specified en- flushed and refilled with fresh cool- dirty or contains a considerable gine coolant (antifreeze), may re-...
  • Page 317 Adding Coolant NOTE: Mixing engine coolant WARNING! (Continued) (antifreeze) types will decrease the Your vehicle has been built with an • Do not use a pressure cap other life of the engine coolant (anti- improved engine coolant (antifreeze) than the one specified for your freeze) and will require more fre- that allows extended maintenance in- vehicle.
  • Page 318 Coolant Level Points To Remember • If frequent engine coolant (anti- freeze) additions are required, or if The coolant bottle provides a quick NOTE: When vehicle the level in the coolant recovery visual method for determining that stopped after a few kilometers of bottle does not drop when the en- the coolant level is adequate.

  • Page 319: Brakes

    Car maintenance should be done at In order to assure brake system per- brake fluid reservoir. With disc a LANCIA Dealership. For routine formance, all brake system compo- brakes, fluid level can be expected to and minor maintenance operations nents should be inspected periodi- fall as the brake pads wear.

  • Page 320: Automatic Transmission

    WARNING! WARNING! CAUTION! (Continued) (Continued) Using a transmission fluid other • To avoid contamination from for- • Do not allow petroleum based than the manufacturer’s recom- eign matter or moisture, use only fluid to contaminate the brake mended fluid may cause deteriora- new brake fluid or fluid that has fluid.

  • Page 321: Appearance Care And Protection From Corrosion

    Car maintenance should be done at cold weather and other extreme con- If you notice fluid leakage or trans- a LANCIA Dealership. For routine ditions will have an adverse effect on mission malfunction, visit your au- and minor maintenance operations...
  • Page 322 What Causes Corrosion? • Avoid using abrasive compounds • If your vehicle is damaged due to an and power buffing that may dimin- accident or similar cause which de- Corrosion is the result of deterioration ish the gloss or thin out the paint stroys the paint and protective or removal of paint and protective finish.
  • Page 323 • For grease stains, apply a high soaking your leather upholstery with CAUTION! quality cleaner to a clean, damp any liquid. Please do not use polishes, Do not use scouring pads, steel cloth and remove the stain. Use a oils, cleaning fluids, solvents, deter- wool, a bristle brush, or metal pol- fresh, damp towel to remove soap gents, or ammonia-based cleaners to...

  • Page 324: Cleaning The Instrument Panel Cupholders

    CLEANING THE To minimize the possibility of scratch- Cleaning Plastic Instrument ing the lenses and reducing light out- Cluster Lenses INSTRUMENT PANEL put, avoid wiping with a dry cloth. To CUPHOLDERS The lenses in front of the instruments remove road dirt, wash with a mild in this vehicle are molded in clear soap solution followed by rinsing.
  • Page 325 Installation CAUTION! (Continued) Place the liner into the cupholder • When replacing a blown fuse, it is drawer and press the liner into place important to use only a fuse hav- so that the retention tabs seat into the ing the correct amperage rating. corresponding openings The use of a fuse with a rating...
  • Page 326 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green — Power Folding Seat 30 Amp Pink — Power Liftgate Module 30 Amp Pink — Rear Door Module (RR Door Node) 25 Amp Natural — Driver Door Node 25 Amp Natural —...
  • Page 327 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description — 20 Amp Yellow Power Outlet #1 (ACC), Rain Sensor — 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT) — 20 Amp Yellow Front Heated Seat (for versions/markets, where provided) — 20 Amp Yellow Rear Heated Seat (for versions/markets, where provided) —...
  • Page 328 FUSES/TIPM Cavity Cartridge Fuse Mini-Fuse Description — 10 Amp Red Ignition Switch, Wireless Control Module, Keyless Entry Mod- ule, Steering Column Lock — 10 Amp Red Powertrain Control Module, Transmission Feed, Transmission Control Module — 10 Amp Red Occupant Classification Module —...
  • Page 329 VEHICLE STORAGE REPLACEMENT BULBS All of the interior bulbs are glass wedge base or glass cartridge types. LIGHT BULBS – If you are leaving your vehicle dor- Aluminum base bulbs are not ap- Interior Bulb Number mant for more than 21 days, you may proved and should not be used for Center &...
  • Page 330 4. Install the new headlamp bulb and Where possible, it is advisable to Discharge (HID) headlamps when twist until locked into the headlamp have bulbs changed at a LANCIA the headlamp switch is turned ON. housing. Dealership. Proper operation and...
  • Page 331 SIDE REPEATER LAMPS 6. Position metal spring clip in 4. Remove the bulb from the connec- fender hole notch. tor socket and install the replacement The side repeater lamps are located in bulb. 7. Position side repeater lamp to hole both front fenders.
  • Page 332 CENTER HIGH-MOUNTED 2. Remove the tail lamp assembly by NOTE: removing the two screws from the in- STOP LAMP (CHMSL) • If a screwdriver is used, make board side. Use a fiber stick or similar sure a soft material is placed be- The CHMSL uses LED lights are not tool to gently pry the light on the tween the vehicle body and tool...
  • Page 333 FLUID CAPACITIES Metric Fuel (Approximate) 76 Liters Engine Oil with Filter 3.6L Engine 5.6 Liters 2.8L Diesel Engine 6.5 Liters Cooling System * 3.6L Engine 12.6 Liters 2.8L Diesel Engine 13.8 Liters * Includes heater and coolant recovery bottle filled to MAX level. Add 2.8 Liters for versions/markets, where provided with a rear heater.
  • Page 334 FLUIDS, LUBRICANTS AND GENUINE PARTS ENGINE Component Fluids and Lubricants Specs (Genuine Parts) Engine Coolant* Red protective agent with antifreeze action, based on inhibited monoethyl gly- col with organic formula. Exceeds CUNA NC 956-16, ASTM D 3306 specifica- tions, FIAT Classification 9.55523 (PARAFLU UP Contractual Technical Ref- erence N°...
  • Page 335 CHASSIS Component Fluids and Lubricants Specs (Genuine Parts) Automatic Transmission Totally synthetic lubricant that meets FIAT Classification 9.55550-AV4 (TUTELA TRANSMISSION FORCE4, Con- tractual Technical Reference N° F108.F11) Brake/Clutch Master Cylinder Synthetic fluid that meets FIAT Classification 9.55597, FMVSS n° 116, DOT 4, ISO 4925, SAE J-1704 (TUTELA TOP 4, Contractual Technical Reference N°...
  • Page 336 1st January 2007, only vehicles regis- these collection and scrapping centres and manufacturing products that are tered after 1st July 2002 were col- either from a LANCIA or LANCIA increasingly “eco-compatible”. lected free of charge, while since 2007 Commercial Vehicle Dealership or by...

  • Page 339: Maintenance Schedules

    MAINTENANCE SCHEDULES • MAINTENANCE SCHEDULE ....334 • MAINTENANCE SCHEDULE – GASOLINE ENGINE ......334 •...
  • Page 340 MAINTENANCE The oil change indicator system will • Under no circumstances should remind you that it is time to take your change intervals exceed SCHEDULE vehicle in for scheduled maintenance. 12,000 km or 12 months, which- MAINTENANCE ever comes first. On Electronic Vehicle Information SCHEDULE –...
  • Page 341 Thousands Of Kilometers Months Inspect and replace PCV valve if necessary. • Check battery charge status and possibly recharge. • • • • • • • • Check tire condition/wear and adjust pressure, if necessary. • • • • • •...
  • Page 342 Thousands Of Kilometers Months Replace spark plugs. • Replace air filter cartridge. • • • • Change engine oil and replace oil filter. (**) Change brake fluid (or every 24 months). • • Replace pollen filter. • • • • •...
  • Page 343 Refer to the Maintenance Schedules factory trained information, genuine • check and, if necessary, replace air on the following pages for the re- LANCIA parts, and specially designed cleaner. quired maintenance intervals. electronic and mechanical tools that can help prevent future costly repairs.
  • Page 344 Thousands Of Kilometers Months Check battery charge status and possibly recharge. • • • • • • • • • • Check tire condition/wear and adjust pressure, if nec- • • • • • • • • • • essary. Check operation of lighting system (headlamps, direc- •...
  • Page 345 Thousands Of Kilometers Months Check engine management system operation (via di- • • • • • • • • • • agnostic socket). Change the automatic transmission fluid and filter. • • Replace fuel filter (diesel version). • • • •...
  • Page 346 Heavy-Duty Use Of The Car You should perform the following in- • check battery charge and battery spections more frequently than shown fluid level (electrolyte); If the car is used mainly under one of on the Scheduled Servicing Plan: the following conditions: •...

  • Page 347: Index

    INDEX...
  • Page 348 Adding Engine Coolant ....311 ....65 Disposal Belts, Seat ....311 (Antifreeze) Anti-Lock Warning Light .
  • Page 349 ..151 ..185 ..269 Cargo (Vehicle Loading) Computer, Trip/Travel Diesel Fuel Requirements Connector Dipsticks Car Washes ....316 .
  • Page 350 ... . .282 ..65, 304 ... .175 Overheating Exhaust System Fog Lights, Rear Fold in Floor (Stow `n Go) Engine .
  • Page 351 High Beam/Low Beam Select ....184 ..23, 228 Conserving Keyless Enter-N-Go ..126 (Dimmer) Switch Gauges Keyless Entry System .
  • Page 352 Theft Alarm (Security ..326 ....268 Center Mounted Stop Methanol Fuel ....173 Alarm) Electronic Stability Program Mini-Trip Computer...
  • Page 353 Oil Change Indicator, ... .64 ... . .175 Pets, Transporting Rear Fog Lights ...169, 170, 184 Reset Phone, Cellular .
  • Page 354 Starting Procedures (Diesel ..253 ..14 Safety Information, Tire Sentry Key Replacement ....230 Engines) Service Engine Soon Light Safety Tips...
  • Page 355 ..130 ..295 ....193 Tilt Steering Column Disabled Vehicle UCI Connector Tire and Loading Information Guide .
  • Page 356 ...27, 143 Wind Buffeting Window Fogging ... .222 ....25 Windows .
  • Page 357 Notes...
  • Page 358 Notes Fiat Group Automobiles S.p.A. - Parts & Services - Technical Services - Service Engineering Largo Senatore G. Agnelli, 3 - 10040 Volvera - Torino (Italia) Print n. 530.02.259 - 08/2012 - Edition 1...
  • Page 360 ENGLISH The data contained in this publication is intended merely as a guide. Lancia reserves the right to modify the models and versions described in this booklet at any time for technical and commercial reasons. If you have any further questions please consult your Lancia...

Table of Contents