Lancia Lybra Owner's Handbook Manual page 181

Change the wheel as follows:
1) Stop the car so that it is not a
hazard for other road users or your-
self when changing the wheel. The
ground should be as flat and firm as
possible.
fig. 3
fig. 4
180
2) Engage the handbrake.
3) Engage first gear or reverse.
4) Open the boot, lift the carpet and
fasten it to the edge with the specific
belt A (fig. 2).
You can remove the carpet by
pulling it out from the boot. Remove
the shim (fig. 3).
5) Release the locking device B (fig. 4).
Take the tool kit C and the spare wheel D
and go to the wheel to be changed.
6) For cars with steel rims: remove
the clipped on wheel cap E (fig. 5) by
grasping it from the slots and pulling
it outwards. Alternatively, use the flat
tip screwdriver provided as a lever on
the edge.
fig. 5
7) For cars with alloy rims: remove
the clipped on wheel hub cap levering
in the specific housing with the flat tip
screwdriver provided. Then rock the
car to make it easier to remove the
rim from the wheel hub.
8) Loosen the bolts by about half a
turn with the supplied wrench (fig. 6).
fig. 6