Lancia Lybra Owner's Handbook Manual page 36

To raise the belt
Lift loop A to the required position.
To lower
Press button B and move loop A
downwards at the same time to the
required position.
After adjustment, always
check that the slider is an-
chored in one of the posi-
tions provided. To do this, with the
button released, exert a further
pressure to allow the anchor de-
vice to catch if release did not take
place at one of the preset positions.
FRONT SEAT BELT LOAD
LIMITING DEVICE
In order to increase passive safety,
the front seat belt reels have a built-
in load limiting device which collapse
in a controlled fashion so to dose the
force on the passenger's shoulder dur-
ing retaining operation.
USE OF THE REAR SEAT
BELTS
The rear seat belts must be
worn as shown (fig. 35).
You should put the belt on when you
are sitting upright and leaning back
in your seat.
When no-one is sitting in the rear
seats, carefully fold the belts and
buckles and stow them away in the
receptacles in the seat back.
fig. 35
35