Lancia Lybra Owner's Handbook Manual page 249

ADDITIONAL BRAKE LIGHTS
(THIRD BRAKE LIGHT)
The light can be reached from the
outside with the tailgate open.
To replace a B, 12V-H21W bulb:
1) Remove the three covers A (fig.
44) using a screwdriver as a lever in
the specific recesses.
2) Loosen the screws B (fig. 45) and
remove the additional brake light C.
3) Turn the bulb holder D (fig. 46)
anticlockwise and remove it.
4) Press and turn bulb E (fig. 46)
anticlockwise and remove it.
5) Fit the new bulb by pressing and
turning it clockwise.
fig. 44
248
6) Insert the bulb holder D (fig. 46)
and turn it clockwise.
7) Reposition the additional brake
light on the tailgate and fasten screws
B (fig. 45).
8) Fasten the caps A (fig. 44) in the
recesses on the screws.
fig. 45
fig. 46
REAR LIGHT CLUSTER
Taillights, direction indicators,
brake lights, reversing light and
rear fog light
To replace a bulb:
1) Remove flap A (fig. 47) from the
right-hand or left-hand utility com-
partment in the boot, pull handle B
and remove the flap.
fig. 47