Lancia Lybra Owner's Handbook Manual page 72

DISTANCE (distance driven)
(fig. 72)
Select the DISTANZA (DISTANCE
TRAV) function by turning knob 3
(fig. 61) and press the knob to confirm.
The distance driven since the trip com-
puter was reset (expressed in km and
rounded up or down by 0.1 km) will
appear (see "Resetting the trip com-
puter").
The distance driven value is updated
by the system every second. The cal-
culation accuracy is lower than 1 km.
The maximum value which can be
displayed is 25,000 km.
Select RETURN after adjusting the
settings by turning knob 3 (fig. 61)
and pressing to confirm. This will
take you back to the trip computer
main menu (fig. 69).
fig. 72
Average speed (fig. 73)
Select the AVERAGE SPEED func-
tion by turning knob 3 (fig. 61) and
press the knob to confirm. The mean
speed since the beginning of the trip
is displayed (expressed in km/h and
rounded up or down by 0.1 km/h).
The mean speed is computed by the
system only when the engine is run-
ning.
The mean speed value is updated by
the system every second. The calcula-
tion accuracy is lower than 0.1 km/h.
Select RETURN after adjusting the
settings by turning knob 3 (fig. 61)
and pressing to confirm. This will
take you back to the trip computer
main menu (fig. 69).
fig. 73
Time elapsed (trip time) (fig. 74)
Select the TIME ELAPSED function
by turning knob 3 (fig. 61) and press
the knob to confirm. The time since
the trip computer was reset (ex-
pressed in hours and minutes) is dis-
played (see "Resetting the trip com-
puter").
The mean speed value is updated by
the system every second. The calcula-
tion accuracy is lower than 2 seconds.
The maximum value which can be
displayed is 99 h and 59 minutes.
Select RETURN after adjusting the
settings by turning knob 3 (fig. 61)
and pressing to confirm. This will
take you back to the trip computer
main menu (fig. 69).
fig. 74
71