Lancia Lybra Owner's Handbook Manual page 84

Table of Contents

Advertisement

IMPORTANT The various AUDIO
settings are stored for the different
functions (TAPE - RADIO - CD -
PHONE). The settings are re-pre-
sented when the function is selected.
Loudness function (10)
Press the LOUD 10 button (fig. 76)
to switch the function LOUDNESS on
and off.
The loudness function improves low
volume playback.
The message "LOUD" will appear
on the display when the function is
on.
The Loudness function is automatic
in HI-FI sound system versions.
M-
Dolby/Mono function (
(19)
M -
Press the
MONO 19 button (fig. 76)
to switch the function on and off.
You should use this function when
you are tuned to a very poor station
to reduce the background noise. The
message "STEREO" will disappear
when the function is on.
You should use this function when
playing back a poorly recorded tape
to reduce the background noise. The
M
symbol
will appear on the displace
when the function is on.
The Dolby noise reduction device is
made under licence from the Dolby
Laboratories Licensing Corporation.
Dolby and double D (
registered trademarks of the Dolby
Laboratories Licensing Corporation.
SELECTING A FUNCTION
(RADIO/TAPE/CD)
MONO)
Press the SRC 7 button to display
the various functions. Press the but-
ton briefly again to make your choice:
– TAPE
– CD (where fitted)
– RADIO (FM, MW or LW)
– PHONE (if a free-hands cellular
phone system is fitted only).
The system will automatically quit
the function selection screen a few
seconds after the last selection.
RADIO
Selecting the waveband
M
) symbol are
FM waveband: repeatedly press the
BAND 16 button until the required
waveband appears on the display
("FM1", "FM2" or "FM3").
AM waveband: repeated press the
BAND 16 button until the required
waveband appears on the display
("MW" medium waves or "LW" long
waves).
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents