CYCLE PARTS
5.8.5.
BLEEDING THE BRAKE CIRCUIT
•
Connect the hose to the brake pump bleed nipple.
•
Operate the brake lever and open the pump bleed nip-
ple slightly to allow the air to escape.
•
Close the nipple before reaching the lever's full stroke
and repeat the operation until no more air issues from
the nipple.
•
Connect the tubes to the brake caliper bleed nipples.
•
Operate the brake lever and open the caliper bleed
nipple slightly to allow the air to escape.
•
Close the nipple before reaching the lever's full stroke
and repeat the operation until no more air issues from
the nipple.
•
To be quite sure of the result, repeat the pump bleed
operation.
5 - 128
RSV 1000 R - RSV 1000 R FACTORY