Clutch Adjustments-Series 37-90 - Cadillac 1937 LaSalle VVI Information

112
C L U T C H
Release Lever Pivot Bolt
Rear Driving
Plate
Center Driving
Plate
Front Driving
Plate.
JEW*
Inner Release
Levers
. O u t e r fie/ease Levers
Fig. 6 Clutch Release Lever Assembly
Release studs for
front driving plate
Install spacers ( 8 7 3 8 6 0 ) between driven discs
a n d clutch hub if necessary to given .025-.040
in. clearance between facings and driving plate.
Spring
Pressure
Plate
Fig. 5 Exploded View of Cfufch
Rep/ace driven discs if
this distance is less than
1-13/32. in.
( n s e r f feeler
guage between upper
facing and center driving plate
clearance should be .025-.040 in
• Center driving plate and discs
supported on blocks under
lower driven disc.
Do not reface discs;
r e p / a c e
disc and facing assembly
Straight Edge-
Rear face of
spring pressure
plate-
• Driven
Discs
Remove 4 nuts
to take out clufc
Fig. 7 Measuring Clearance Between Clutch
Facing and Center Driving Plate
Fig. 8 Measuring Driven Disc W e a r
Plate 47. Clutch Adjustments—Series 37-90