fm.book 37 ページ 2004年7月13日 火曜日 午後4時55分
Menu 4 Configuration
Functions concerning printing such as size and type of paper to be loaded in the feed trays and the Job Separation function can be set.
Functions
The functions that can be set are shown below.
4.1 Standard Feed Tray
4.2 Feed Tray 1
4.3 Feed Tray 2
p.38
Set the size and type of paper to be loaded in the Standard Feed Tray and the other feed trays and turn on or off the Double Feed
Check function.
4.4 Feed Tray Relay
p.40
Sets whether or not to enable the Feed Tray Relay function that uses Feed Tray 1 and Feed Tray 2. If "4.5 Triple-Tray Source"
is set to "ON," feed trays including the Standard Feed Tray can be used for Feed Tray Relay.
4.5 Triple-Tray Source
Sets whether or not to include the Standard Feed Tray into feed trays for selection when instructing printing without specifying
the tray (Auto tray selection) from the printer driver.
4.6 Job Separation
p.42
Inserts separation paper between jobs or every division such as set or page when printing multiple sets.
4.7 Print Density
p.43
Selects the print density from five levels.
4.8 Paper Ejection
p.44
Sets the adjustment of the Auto Stacking Tray of Eject Wing and the Stack Guides.
4.9 Temp Data Clear
p.47
Clears temporary data in the printer.
4.10 Image Area
p.48
Sets the maximum print area.
p.41
2
37