Table of Contents
Advertisement
Chapter 1 Copy
Sample Copy
The printing stops after one copy has been printed.
This function allows you to check the output before
making a large number of printouts.
• If you set [Sort] to [Collated], you can use this
function to make one copy as a sample. (p. 1-10
"Sort")
1
Touch [Sample Copy].
The [Sample Copy] screen is displayed.
2
Touch [ON].
3
Touch [OK].
4
Press the [Start] key.
The [Making sample copies] screen is displayed,
and copying of the original starts. The current status
is displayed on the screen.
• The copying can be paused with the [Stop] key.
(p. 1-3 "Canceling Copying")
• Touch [Slow Printing] to slow down the printing
speed. This also reduces the operating sound of
the job being processed.
The [Confirm] screen appears after a sample copy is
printed.
You can change the following settings.
• [Change Setting] (p. 1-3 "Changing the Settings
During Copying")
• [Maintenance] (p. 1-4 "Performing Maintenance
During Copying")
1-26
Check Setting
This function allows you to check the current
settings.
1
Touch [Check Setting].
The [Check Setting] screen is displayed. Check the
current settings.
The following settings can be configured from the
sub menu.
• Add to Favorites
• Save as Default
• Print This List
2
Touch [Close].
Custom Menu
You can register favorites and default settings, and
edit the button order.
Adding as a Favorite
Register the settings and the number of copies for
a setting button as a favorite. You can register up to
30 favorites.
1
Touch [Custom Menu].
The [Custom Menu] screen is displayed.
2
Touch [Favorites Create/Edit].
3
Touch [Create].
The [Add to Favorites] screen is displayed. Check
the current settings.
ComColor FW Series User's Guide
Advertisement
Table of Contents
