How To Set The Automatic Date Advance Function - Neopost IS-280 User Manual

Automatic Date Advance
The Auto Date -Advance function automatically proposes, at a preset time, to change the
date printed on mail pieces to the next 'working day' date.
Example : you can set the system to change dates at 17:00 hours, and set Saturdays and
Sundays to be non-working days. From Friday 17:00 hours to Sunday 23:59, the system
will automatically print Monday's date on the envelopes (after a confirmation message to
the user; if the change is not confirmed and printing maintained, current date is printed).

How to Set the Automatic Date Advance Function

To select auto date-advance time and days logged as Supervisor (See
in as Supervisor
1. Either:
Press
9
Or
Select the path:
matic date advance
The Automatic date advance setting screen is displayed.
The second line of the screen indicates whether the function is active or not.
2. To change the function state, press [OK] or type 1 to access the Activate/Inactivate
screen and change the function state.
Select ON and press [OK] to enable the Auto Date-Advance function.
3. To set the changing time, select Set hours and press [OK] (or type 2 ).
4. Enter the Automatic Date-Advance time (00:00 hours is not allowed) and press [OK]
.
5. To set working days, select Set working days and press [OK] (or type 3 ).
6. Select or deselect each day by pressing [OK] and using the up/down arrows.
7.
Press
158
on page 136 ):
and type 3.3.4
Default user settings
to validate and exit.
Default imprint parameters
How to Log
Auto-