Recording Schedule Setup - Honeywell Fusion IV User Manual

Recording Schedule Setup

________________________________________________________________________________________________________
62
Creating a customized schedule is important to maximize the efficiency of the DVR.
The Fusion DVR offers numerous options to allow for a wide variety of different needs
and requirements.
Default Schedule 1
All cameras are set to:
8AM-5PM Continuous recording
5PM-8AM Motion recording
Schedule Number
Special Day
Recording Schedule
Alarm Options
Power Off Options
Default Schedule 2
All cameras are set to:
Motion recording 24 hours/day, 7
days/week.
Camera 1 associated to sensor input 1
Camera 2 associated to sensor input 2
Camera 3 associated to sensor input 3, etc.
The Schedule Number is a group of settings. Up to 32
schedules can be created. Think of the schedules as
transparency paper with words written on them. When placed
one on top of another, the words can still be seen from the
layers below. These schedules allow a powerful detailed
recording schedule to be created.
Customize a schedule for a particular day, such as a Parade
Day, Holiday, etc.
These are advanced options that send alarm events (either
motion or sensor) to the remote alarm monitor software and
FVMS.
Tip To send motion events to FVMS, select both Motion
Event and Map Alarm check boxes.
Allows the user to specify time frames for turning off and
restarting the DVR automatically.