Record Setup; Configuring The Recording Behavior Of Your Dvr; Figure 2-57 Setup Window; Figure 2-58 Recording Setup Window - Honeywell HREP16 User Manual

Installation

RECORD SETUP

Configuring the Recording Behavior of your DVR

64
Click MENU on the control panel.
The SETUP window appears.
Figure 2-57 SETUP Window
Click RECORD SETUP in the SETUP window.
The RECORDING window appears.
Figure 2-58 RECORDING Setup Window
Use the to configure the settings on the RECORDING OPERATION window. See
Figure 2-58.
SCHEDULE MODE
PRE EVENT
RECORDING TIME
POST EVEN
RECORDING TIME
Select either DAILY (one schedule applies to every
day of the week) or WEEKLY (each day of the week
has its own schedule).
When the DVR is not in continuous recording mode,
this setting determines the amount of time that is
always recorded before an event (motion detection,
alarm input, for example) occurs.
When the DVR is not in continuous recording mode,
this setting determines the amount of time that is
always recorded after an event (motion detection,
alarm input, for example) occurs.