SMC Networks HRS100-A?-20-? Operation Manual page 152

HRX-OM-S004
Chapter 5 Display and setting of various functions
Setting/Checking: Selected alarm for contact output signal 3
61.
Press the [SEL] key once.
Setting screen of the selected alarm of the contact output signal 3 is displayed on the
digital display.
PV
SV
62.
Set the alarm selected for the contact output signal 3 with [▲] key or [▼]key, and press
[SEL] key to enter.
Table 5.21-32 Setting of an alarm selected for the contact output signal 3
Set value
to
63.
Press the [MENU] key once.
Returns to the main display (which shows the circulating fluid temperature).
PV
SV
5.21 Communication function
5-86
Explanation
Setting/checking is possible only when the
contact output signal 3 is set to the selected
alarm status signal output.
Setting of the selected alarm
Setting range: AL.01 to AL.51
Initial value
(Default setting)
HRS Series