SMC Networks HRS100-A?-20-? Operation Manual page 140

HRX-OM-S004
Chapter 5 Display and setting of various functions
18.
Set BCC (simple communication protocol) with [▲] key or [▼] key, and press [SEL] key
to enter.
Set value
Setting/Checking: Data length (simple communication protocol)
19.
Press the [SEL] key once.
Setting screen of data length (simple communication protocol) is displayed on the digital
display.
PV
SV
20.
Set data length (simple communication protocol) with [▲] key or [▼] key, and press
[SEL] key to enter.
Set value
Setting/Checking: Parity check (simple communication protocol)
21.
Press the [SEL] key once.
Setting screen of parity check (simple communication protocol) is displayed on the
digital display.
PV
SV
5.21 Communication function
5-74
Table 5.21-10 BCC setting
Explanation
Setting/checking is possible only when the
serial protocol setting is simple
communication protocol.
Without BCC
With BCC
Table 5.21-11 Data length setting
Explanation
Setting/checking is possible only when the
serial protocol setting
communication protocol.
7 bit
8 bit
Initial value
(Default setting)
Initial value
(Default setting)
is simple
✓
✓
HRS Series