SMC Networks HRS100-A?-20-? Operation Manual page 148

HRX-OM-S004
Chapter 5 Display and setting of various functions
Setting/Checking: Selected alarm for contact output signal 1
49.
Press the [SEL] key once.
Setting screen of selected alarm of the contact output signal 1 is displayed on the digital
display.
PV
SV
50.
Set the alarm selected for the contact output signal 1 with [▲] key or [▼] key, and press
[SEL] key to enter.
Table 5.21-26 Setting of the alarm selected for the contact output signal 1
Set value
to
Setting/Checking: Contact output signal 2 function
51.
Press the [SEL] key once.
Setting screen of the contact output signal 2 function is displayed on the digital display.
PV
SV
5.21 Communication function
5-82
Explanation
Setting/checking is possible only when the
contact output signal 1 is set to the selected
alarm status signal output.
Setting of the selected alarm
Setting range: AL.01 to AL.51
Initial value
(Default setting)
HRS Series