SMC Networks HRS100-A?-20-? Operation Manual page 127

Setting/Checking: Monitoring start timer
32.
Press the [SEL] key once.
Setting screen of the monitoring start timer is displayed on the digital display.
PV
SV
33.
Set monitoring start timer with the [▲] key or the [▼] key, and press [SEL] key to enter.
Set value
to
∗ Settings of this function and example of alarm generating timing for "5.20.3 Setting of
temperature alarm monitoring method and alarm generation timing ".
Setting/Checking: Range over detection timer
34.
Press the [SEL] key once.
Setting screen of the range over detection timer is displayed on the digital display.
PV
SV
35.
Set range over detection timer with the [▲] key or [▼] key, and press [SEL] key to
enter.
Set value
to
∗ Settings of this function and example of alarm generating timing for "5.20.3 Setting of
temperature alarm monitoring method and alarm generation timing ".
HRS Series
Table 5.20-23 Setting of the monitoring start timer
Explanation
Setting and checking are impossible when "0:
Continuous monitoring" or "1: Automatic
monitoring" is selected for the setting of AS21
"Temperature alarm monitoring method".
Sets the time when alarm monitoring starts.
Setting unit is 1 minute.
Table 5.20-24 Setting of the range over detection timer
Explanation
Sets time before the alarm is generated after
the alarm is generated.
Setting unit: 1 second
Chapter 5 Display and setting of various functions
HRX-OM-S004
Initial value
(Default setting)
Initial value
(Default setting)
5.20Alarm customizing function
5-61