SMC Networks HRS100-A?-20-? Operation Manual page 142

HRX-OM-S004
Chapter 5 Display and setting of various functions
26.
Set responce delay time (simple communication protocol) with [▲] key or [▼] key, and
press [SEL] key to enter.
Set value
to
Setting/Checking: Communication range (simple communication protocol)
27.
Press the [SEL] key once.
T Setting screen of communication range (simple communication protocol) is displayed
on the digital display.
PV
SV
28.
Set communication range (simple communication protocol) with [▲] key or [▼] key, and
press [SEL] key to enter.
Set value
Setting/Checking: Contact input signal 1
29.
Press the [SEL] key once.
Setting screen of contact input signal 1 is displayed on the digital display.
PV
SV
5.21 Communication function
5-76
Table 5.21-14 Setting of response delay time
Explanation
Setting/checking is possible only when the
serial protocol setting
communication protocol.
Setting of response delay time
Setting range: 0 to 250 ms
Table 5.21-15 Setting of communication range
Explanation
Setting/checking is possible only when the
serial protocol setting
communication protocol.
Only reading is available
Reading and writing are available
Initial value
(Default setting)
is simple
Initial value
(Default setting)
is simple
✓
HRS Series