SMC Networks HRS100-A?-20-? Operation Manual page 139

14.
S Set slave addresses (simple communication protocol) with [▲] key or [▼] key, and
press [SEL] key to enter.
Set value
to
Setting/Checking: Communication speed (simple communication protocol)
15.
Press the [SEL] key once.
Setting screen of communication speed (simple communication protocol) is displayed
on the digital display.
PV
SV
16.
Set communication speed (serial communication protocol) with [▲] key or [▼] key, and
press [SEL] key to enter.
Set value
Setting/Checking: BCC (simple communication protocol)
17.
Press the [SEL] key once.
Setting screen of BCC (simple communication protocol) is displayed on the digital
display.
PV
SV
HRS Series
Table 5.21-8 Setting of slave addresses
Explanation
Setting/checking is possible only when the
serial protocol setting is simple
communication protocol.
Setting of slave addresses for simple
communication protocol
Setting range: 1 to 99
Table 5.21-9 Communication speed setting
Explanation
Setting/checking is possible only when the
serial protocol setting is simple
communication protocol.
1200bps
2400bps
4800bps
9600bps
19200bps
Chapter 5 Display and setting of various functions
HRX-OM-S004
Initial value
(Default setting)
Initial value
(Default setting)
✓
5.21Communication function
5-73