SMC Networks HRS100-A?-20-? Operation Manual page 145

38.
Perform setting of the contact input signal 2 with [▲] key or [▼] key, and press [SEL]
key to enter.
Set value
∗1: When the serial communication protocol is set to "Simplified communication protocol 2", it is
not possible to set to "Remote signal".
Setting/Checking: Contact input signal 2 type
39.
Press the [SEL] key once.
Setting screen of contact input signal 2 type is displayed on the digital display.
PV
SV
40.
Select contact input signal 2 type with [▲] key or [▼] key, and press [SEL] key to enter.
Set value
∗1: This can be set only when the contact input signal 2 is set to "Run/Stop signal input" or "Remote
signal".
Setting/Checking: Contact input signal 2 delay timer of reading
41.
Press the [SEL] key once.
Setting screen of contact input signal 2 delay timer is displayed on the digital display.
PV
SV
HRS Series
Table 5.21-20 Setting of the contact input signal 2
Explanation
No signal input
Run/stop signal input
External switch signal input (N.O. type)
External switch signal input (N.C. type)
∗
1
Remote signal input
Table 5.21-21 Setting of the contact input signal 2 type
Explanation
Setting/checking are not available when
contact input signal 2 setting is OFF.
Alternate signal
∗ 1
Momentary signal
Chapter 5 Display and setting of various functions
HRX-OM-S004
Initial value
(Default setting)
✓
Initial value
(Default setting)
✓
5.21Communication function
5-79