SMC Networks HRS100-A?-20-? Operation Manual page 115

Code Alarm name
Dust-proof
AL40
maintenance
AL41 Power stoppage
AL42 Compressor waiting
AL43
Fan failure
*12
AL45
Compressor
current
*12
AL47 Pump over current
AL49
Air exhaust
stoppage
*13
Incorrect
AL50
error
Phase board over
AL51
current
*12: Water-cooled type model does not generate this alarm.
*13: Air-cooled type model does not generate this alarm.
When the operation setting for the alarm that has been set to A.STP as
default is changed to A.RUN or OFF, the product operation will not
stop even when the alarm is generated. Keeping operation of the
product even after an alarm is generated may cause failure. Remove
the causes of the alarm as soon as possible.
Be sure to remove the cause of the alarm immediately after the alarm
occurred. Otherwise it may cause a malfunction of the product.
HRS Series
Table 5.20-4 Alarm setting and customizing (2/4)
①Alarm operations
Display
filter
-
○
-
-
●
over
●
○
fan
-
-
phase
○
-
○
-
Chapter 5 Display and setting of various functions
②Alarm threshold and others
Display
○ - ● -
- - ● -
○ - - -
- ○ - -
- ○ - -
- - - -
○ - - -
- - - -
- - - -
HRX-OM-S004
Default Settable
setting range
-
-
-
-
-
-
-
-
-
5.20Alarm customizing function
5-49