SMC Networks HRS100-A?-20-? Operation Manual page 125

25.
Set the product operation when "Contact input 1 signal detection" alarm is generated
with [▲] key or [▼] key, and press [SEL] key to enter.
Table 5.20-19 Operation setting when "Contact input 1 signal detection" alarm is generated
Set value
Setting/Checking: Operation setting when "Contact input 2 signal detection" alarm is generated
26.
Press the [SEL] key once.
Operation setting screen when "Contact input 2 signal detection" alarm is detected
appears on the digital display.
PV
SV
27.
Set the product operation when "Contact input 2 signal detection" alarm is generated
with [▲] key or [▼] key, and press [SEL] key to enter.
Table 5.20-20 Operation setting when "Contact input 2 signal detection" alarm is generated
Set value
Setting/Checking: Operation when "DC line fuse cut" alarm is generated
28.
Press the [SEL] key once.
Operation setting screen when "DC line fuse cut" alarm is generated appears on the
digital display.
PV
SV
HRS Series
Explanation
This alarm is not detected.
Operation continues when this alarm is
generated.
Operation stops when this alarm is generated.
Explanation
This alarm is not detected.
Operation continues when this alarm is
generated.
Operation stops when this alarm is generated.
Chapter 5 Display and setting of various functions
HRX-OM-S004
Initial value
(Default setting)
✓
Initial value
(Default setting)
✓
5.20Alarm customizing function
5-59