HRX-OM-S004
Chapter 5
Display and setting of various functions
Setting/Checking: Slave addresses (MODBUS)
9.
Press the [SEL] key once.
Setting screen of slave addresses (MODBUS) is displayed on the digital display.
PV
SV
10.
Set slave addresses (MODBUS) with [▲] key or [▼] key, and press [SEL] key to enter.
Set value
to
Setting/Checking: Communication speed (MODBUS)
11.
Press the [SEL] key once.
Setting screen of the communication speed (MODBUS) is displayed on the digital
display.
PV
SV
12.
Set communication speed (MODBUS) with [▲] key or [▼] key, and press [SEL] key to
enter.
Set value
Setting/Checking: Settings of slave addresses (simple communication protocol)
13.
Press the [SEL] key once.
Setting screen of slave addresses (simple communication protocol) is displayed on the
digital display.
PV
SV
5.21 Communication function
5-72
Table 5.21-6 Slave address settings
Explanation
Setting/checking is possible only when the
serial protocol is MODBUS.
Slave address setting for MODBUS
Setting range: 1 to 99
Table 5.21-7 Communication speed setting
Explanation
Setting and checking is possible only when
the serial protocol setting is MODBUS.
9600bps
19200bps
Initial value
(Default setting)
Initial value
(Default setting)
✓
HRS Series