Switching The Digtascan On And Off - Grundig Digta 4015 DS Manual

DIGTASCAN 404 BARCODE READER

Switching the DigtaScan on and off

Delete
Barcode reader
Dictation status
OK ESC
Search
Delete
On/Off
OK ESC
BC on
BC off
OK ESC
• The DigtaScan must be inserted and latched into the
portable dictation machine.
Only when the DigtaScan is plugged in are the associated
menu items available on the dictation machine.
• Switch on the dictation machine.
• Push the slide switch to »
• Press the »MENU« button.
• Use the Up/Down button » « or » « to select »Barcode
reader« and then press the »OK« button.
• Use the Up/Down button » « or » « to select »On/Off«
and then press the »OK« button.
• Use the Up/Down button » « or » « to select »BC on«
or »BC off« and then press »OK«.
– »BC on«, when you create dictations with the »NEW«
button, you are prompted to scan. You can now scan in
a barcode and store it in the dictation accompanying
note.
– »BC off«, when you create dictations with the »NEW«
button, you are not prompted to scan even though
the DigtaScan is plugged in. You can still program
the DigtaScan
»Programming« menu.
Note:
The selected setting is retained even if the DigtaScan is
removed from the portable dictation machine. However,
you can only change the setting when the Digta
Scan is attached.
STOP«.
in the »Barcode
_____
reader«
>
63