Inserting Replaceable - Grundig Digta 4015 DS Manual

PREPARATIONS
Inserting replaceable memory cards
(not supplied)
You can use memory cards instead of the internal memory.
Use DigtaCards supplied as accessories by Grundig Business
Systems.
• Push the memory card into the slot with the side with the
diagonal corner facing the direction shown on the back of
the device.
Notes:
Do not insert the card with force. Slight pressure is
sufficient.
Do not remove the cards when recording is running or
during data transfer from PC to PC. This can result in data
EAR
loss.
If a full memory card (e.g. with over 300 dictations) is
inserted into the dictation machine with factory default
settings (or with a reset dictation counter), it takes up to
20 seconds to create a new dictation. This time is required
for the dictation machine to search for the first free dicta-
tion number starting from dictation number 1. This time
also varies depending on the manufacturer of the memory
card.
If you
(MMC/SD) with insufficient writing speed, »Card not
supported!« appears in the display.
Make sure that the electrical contacts on the underside of
the memory card are not subjected to physical stress.
The cards are not affected by dirt or moisture, but they
may only be put into the dictation machine when they are
clean and dry.
______________________________________
use MultiMediaCards/SecureDigital Cards
14