Table of Contents
Advertisement
DIGTASCAN 404 BARCODE READER
Restoring the default settings
Delete
Barcode reader
Dictation status
OK
ESC
Delete
On/Off
Programming
OK
ESC
Programming
Barcode reader
SCAN RESET
END
Disable
all barcodes?
OK
ESC
You
can
restore
If you do so, all barcode symbologies are disabled except for
EAN-13.
• The DigtaScan must be inserted and latched into the
portable dictation machine (see also "Plugging in,
Unplugging").
– Only when the DigtaScan is plugged in are the asso-
ciated menu items available on the dictation machine.
• Switch on the dictation machine.
• Push the slide switch to »
• Press the »MENU« button.
• Use the Up/Down button » « or » « to select
»Barcode reader« and then press the »OK« button.
• Use the Up/Down button » « or » « to select
»Programming«.
– The »Programming Barcode reader« menu function
appears in the display.
• Press the »RESET« button.
– »Disable all barcodes?« appears in the display.
• Press the »OK« button to leave only symbology EAN-13
enabled. Press the »ESC« button if you would like to keep
the other symbologies enabled.
• Once you have made all the settings, press the »END«
button to quit the menu.
the
DigtaScan's
STOP«.
_____
default
settings.
72
Advertisement
Table of Contents
