Audio Signals - Grundig Digta 4015 DS Manual

SETTINGS IN THE MENU

Audio signals

PC microphone
Power off
Audio signals
OK ESC
Ack. beep
Audio warning
OK ESC
The »Audio signals« function enables you to turn the
acknowledgement and signal tones on and off.
• Use the Up/Down button » « or » « to select
»Settings« and then press the »OK« button.
• Use the Up/Down button » « or » « to select »Audio
signals«.
• Press the »OK« button.
• Press » « or » « to select »Ack. beep« or »Audio
warning«.
• Press » « or » « to select »Signaling on«/»Signaling
off«.
Note:
If you select »Audio warning Signaling off« you will not
hear a signal when the memory is full or the battery is flat.
If you dictate without looking at the display, the device
may switch off with no signal tone, and you may not
notice.
________________________
46