Unplugging - Grundig Digta 4015 DS Manual

DIGTASCAN 404 BARCODE READER

Unplugging

• Remove the locking screw (if present).
• Press the latch on the back of the DigtaScan. The Digta
Scan is unlocked and you can now pull it out of the
memory card slot.
Note:
The DigtaScan is latched securely to the housing. Do not
attempt to remove the DigtaScan by pressing the card
»EJECT« button, since that could damage the dictation
machine or the DigtaScan. Instead, press the latch on the
rear of the DigtaScan slightly in while pulling the Digta
Scan out of the card slot. See the illustration on page 61.
_____
62