[421]-[422]
[421] CPC Detection for Outgoing Calls
Enables or disables the CPC signal detection during an outgoing outside call. If disabled,
the CPC signal detection is only activated during an incoming outside call or after call hold.
4
* Exchange line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Calling Party Control (CPC) Signal Detection
[422] Disconnect Time
Determines the amount of time to send the disconnect signal from the system to the Local
Exchange or host PBX. The time you select must be longer than the requirement of your
Local Exchange or host PBX.
4
2
* Exchange line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Recall
4-54
System Programming
2
1
exchange line no.*
NEXT
All exchange lines – Disable
exchange line no.*
2
NEXT
All exchange lines – 2.0 seconds
4.2
System Programming
or
PREV
NEXT
SELECT
(1···6/ )
(Enable/
Disable)
SELECT
(All exchange lines)
or
PREV
NEXT
SELECT
(1···6/ )
(0.5/2.0/
4.0 sec)
SELECT
(All exchange lines)
To continue
STORE
END
To continue
To continue
STORE
END
To continue