STEP 6
1. Cap two 50mm SQ. End Caps (94) to the Bench Base Frame (19). Attach the Bench
Main Frame (22) to Bench Base Frame (19), using two 1/2" Washers (151) and two 1/2"
Nuts (158).
2. Attach the Bench Back Support (24) and Bench Seat Adjuster (30) to the Bench Main
Frame (22), using two 1/2" X 5" Hex Bolts (123), four 1/2" Washers (151) and two 1/2"
Nuts (158). Tighten these bolts and then loosen just enough for the Seat and Back to
pivot freely. Attach the Bench Seat Pad (69) to Bench Seat Adjuster (30) using two 3/8"
X 2-3/4" Hex Bolts (132) and 3/8" Washers (152). Attach the Bench Back Pad (70) to the
Bench Back Support (24) using two 3/8" X 2-3/4" Hex Bolts (132) and 3/8" Washers
(152).
3. Insert a 45 X 75mm Plug (96) into the Bench Back Support (24) and a 45 X 75mm Plug
(96) into the Bench Seat Arm (30).
69
30
152
96
132
152
132
158
151
22
114
99
151
158
158
151
151
94
19
94
Bench Assembly
70
96
24
152
132
123
104
104
7
12